Shot peening metal and metal products for the trade · California
Metal Improvement Company LLC
Livermore, CA · ~29 workers · 8 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 2.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Metal Improvement Company LLC runs at 89% of its industry's injury rate - about level with the typical Shot peening metal and metal products for the trade workplace, earning a grade C.
Metal Improvement Company LLC: 2.9 TCR = 89% of Shot peening metal and metal products for the trade BLS 3.3 · 8y Form 300A (see methodology below)
Metal Improvement Company LLC safety composite
Metal Improvement Company LLC scores strongest on dart rate (safer than 79% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
68/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 2.94 per 100 workers
Safer than 68% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 79% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−4.8
2017→2024
Metal Improvement Company LLC injury rate improved
Metal Improvement Company LLC's TCR fell 4.8 from 4.8 in 2017 to 0.0 in 2024. Peak filing year was 2017 at 4.8 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
2017=4.8 · 2018=3.2 · 2019=3.1 · 2020=0.0 · 2021=4.2 · 2022=4.3 · 2023=3.9 · 2024=0.0
OSHA ITA Form 300A scorecard
Establishment book 332811 · Livermore, CA AT/BELOW-IND · SMALL
Grade C · TCR 2.9 · 89% of ind
- DART 0.0 DART
- RANK #5/14
- PHOTO Applied Thermal Tech…
- BOOK 8y book
- INJ 6 inj
- SIZE ~29 FTE
Nearest TCR peer: Applied Thermal Technologies, Inc. (0.0 TCR gap)
Read with this employer → · Industry book → · California employers → · Look up another →
Metal Improvement Company LLC in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Applied Therma
Applied Thermal Technologies, Inc.
3 TCR
- Byron Products
Byron Products
3 TCR
- This site
Metal Improvement Company LLC
2.9 TCR
- J.W. Harris Co
J.W. Harris Co., Inc. - Carthage
2.9 TCR
- KC Jones Brazi
KC Jones Brazing
2.9 TCR
What this shows Metal Improvement Company LLC averages 2.9 TCR (89% of the Shot peening metal and metal products for the trade BLS benchmark).
Metal Improvement Company LLC TCR series: 2017=4.8 · 2018=3.2 · 2019=3.1 · 2020=0 · 2021=4.2 · 2022=4.3 · 2023=3.9 · 2024=0 · BLS 3.3
Where Metal Improvement Company LLC falls in its industry
248 Shot peening metal and metal p establishmentsSafer than 68% of graded establishments in this industry, whose median TCR is 4.2.
Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #5 safest of 14 Shot peening metal and metal p employers in California.
Metal Improvement Company LLC has fewer employees than the Shot peening metal and metal products fo median and a lower injury rate than the industry's median TCR of 4.2. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2023 | 3.9 | 3.9 | 1 | 0 | 0 |
| 2022 | 4.3 | 4.3 | 1 | 0 | 0 |
| 2021 | 4.2 | 4.2 | 1 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 3.1 | 0.0 | 1 | 0 | 0 |
| 2018 | 3.2 | 0.0 | 1 | 0 | 0 |
| 2017 | 4.8 | 4.8 | 1 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332811 · CA · Livermore
248 Shot peening metal and metal products for the trade employers nationwide with a credible TCR · 51,834 rated employers in California with headcount on file · 296 employers in Livermore, CA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Applied Thermal Technologies, Inc. | 3.0 TCR |
| NAICS-TCR | J.W. Harris Co., Inc. - Carthage | 2.9 TCR |
| NAICS-TCR | KC Jones Brazing | 2.9 TCR |
| NAICS-TCR | Byron Products | 3.0 TCR |
| STATE-SIZE | Sean V. Doherty Farms | 29 FTE |
| STATE-SIZE | Blanco Farms, LLC | 29 FTE |
| STATE-SIZE | CONSTRUCTION SUPPORT SHOP | 29 FTE |
| STATE-SIZE | Cottonwood Farms | 29 FTE |
| CITY-NEAR | Retail Merchandising Solutions, LLC | 4,717 FTE |
| CITY-NEAR | California Department of Transportation Facility 577 | 2,891 FTE |
| CITY-NEAR | Gillig LLC | 940 FTE |
| CITY-NEAR | Fat Chance Entertainment | 917 FTE |
| NAT-TCR | Nathan's Famous #301 MGM | 2.9 TCR |
| NAT-TCR | Palmer Waterproofing, Inc. | 2.9 TCR |
| NAT-TCR | Store #24 | 2.9 TCR |
| NAT-TCR | Corner Market #6055 | 2.9 TCR |
| NAT-SIZE | Guadalupe Energy Center | 29 FTE |
| NAT-SIZE | Mayfield MAY | 29 FTE |
| NAT-SIZE | Vcf 101 | 29 FTE |
| NAT-SIZE | Lassiter Lumber Company, LLC @ Millry | 29 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.