Retreading materials, tire, manufacturing · Georgia
Michelin North America Tread Technology
Covington, GA · ~203 workers · 2 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.3
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Michelin North America Tread Technology runs at 100% of its industry's injury rate - about level with the typical Retreading materials, tire, manufacturing workplace, earning a grade C.
- C
- Average Safety Record
- 3.3
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 13
- recordable injuries tracked
Grade compares Michelin North America Tread Technology's OSHA Total Case Rate of 3.3 to the Retreading materials, tire, manufacturing BLS benchmark of 3.3 (100% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Michelin North America Tread Technology's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Michelin North America Tread Technology falls in its industry
119 Retreading materials, tire, ma establishmentsSafer than 45% of graded establishments in this industry, whose median TCR is 3.0.
Narrower to Georgia alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 7 Retreading materials, tire, ma employers in Georgia.
Trend analysis for Michelin North America Tread Technology
Between 2022 and 2023, Michelin North America Tread Technology's Total Case Rate worsened from 3.1 to 3.5 recordable injuries per 100 full-time workers, a 11% increase across 1 year of OSHA reporting.
The safest year on record was 2022, at a TCR of 3.1, while 2023 saw the highest rate, at 3.5, a spread of 0.3 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Michelin North America Tread Technology recorded 13 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 13 injuries shown on this page for Michelin North America Tread Technology are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 326211 - Retreading materials, tire, manufacturing.
DART Rate, Transparent Calculation (2023)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
6 DART incidents × 200,000 ÷ 403,309 hours worked = 2.98 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Michelin North America Tread Technology (this establishment) | 3.31 | OSHA ITA Form 300A, 2-year avg |
| Tires (e.g., pneumatic, semi-pneumatic, solid rubber) manufacturing industry avg | 3.30 | BLS IIF, NAICS 326211 |
| Georgia state avg (all industries) | 4.11 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Michelin North America Tread Technology to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2023: 7 reportable incidents · 7 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 3.5 | 3.0 | 7 | 0 | 0 |
| 2022 | 3.1 | 1.6 | 6 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Michelin North America Tread Technology's reported OSHA injury record versus its Retreading materials, tire, manufacturing peers, not a verdict on whether any single site is safe today.
- At 100% of the Retreading materials, tire, manufacturing benchmark, Michelin North America Tread Technology reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Retreading materials, tire, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Michelin North America Tread Technology's safety grade?
How many injuries has Michelin North America Tread Technology reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Georgia, and by nearby establishments in Covington - a different peer set than the category browse links below.
Similar TCR (~3.3)
Similar size (~203 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.