Molding and trim (except motor vehicle), metal, manufacturing · California

Minimatics, Inc.

Santa Clara, CA · ~23 workers · 4 years of OSHA Injury Tracking Application data.

C
Average Safety Record
3.9
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Minimatics, Inc. runs at 118% of its industry's injury rate - about level with the typical Molding and trim (except motor vehicle), metal, manufacturing workplace, earning a grade C.

Minimatics, Inc.: 3.9 TCR = 118% of Molding and trim (except motor vehicle), metal, manufacturing BLS 3.3 · 4y Form 300A (see methodology below)

Minimatics, Inc. safety composite

Minimatics, Inc. scores strongest on total case rate (tcr) (safer than 52% of same-industry peers) and weakest on dart rate (safer than 1%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

F

34/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
D 3.91 per 100 workers

Safer than 52% of industry peers

DART rate
F 15.64 per 100 workers

Safer than 1% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Minimatics, Inc.: 0.0 → 15.6 TCR

Peak year 2021 @ 15.6 TCR · DART/TCR 4× in 2021

Minimatics, Inc.'s TCR rose 15.6 from 0.0 in 2018 to 15.6 in 2021. In 2021, DART was 4× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 332321 · Santa Clara, CA ABOVE-IND · SMALL

Grade C · TCR 3.9 · 118% of ind

  • DART 15.6 DART
  • RANK #22/42
  • PHOTO 4016 - Eau Claire Pr…
  • BOOK 4y book
  • INJ 3 inj
  • SIZE ~23 FTE

Nearest TCR peer: 4016 - Eau Claire Prehung SDM (0.0 TCR gap)

Read with this employer → · Industry book → · California employers → · Look up another →

Minimatics, Inc. in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Minimatics, Inc. averages 3.9 TCR (118% of the Molding and trim (except motor vehicle), metal, manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Minimatics, Inc. TCR series: 2018=0 · 2019=0 · 2020=0 · 2021=15.6 · BLS 3.3

Where Minimatics, Inc. falls in its industry

515 Molding and trim (except motor establishments

Safer than 52% of graded establishments in this industry, whose median TCR is 4.1.

More dangerous than peersSafer than peers

Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #22 safest of 42 Molding and trim (except motor employers in California.

Minimatics, Inc. (23 employees, TCR 3.9) among 29 same-industry peers, split at the industry median of 83 employees and a TCR of 4.1 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0200400600800 051015 Average employees Total Case Rate Minimatics, Inc.
Minimatics, Inc. (23 employees, TCR 3.9) among 29 same-industry peers, split at the industry median of 83 employees and a TCR of 4.1

Minimatics, Inc. has fewer employees than the Molding and trim (except motor vehicle), median and a lower injury rate than the industry's median TCR of 4.1. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2021 15.6 15.6 3 1 0
2020 0.0 0.0 0 0 0
2019 0.0 0.0 0 0 0
2018 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332321 · CA · Santa Clara

515 Molding and trim (except motor vehicle), metal, manufacturing employers nationwide with a credible TCR · 51,834 rated employers in California with headcount on file · 332 employers in Santa Clara, CA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR 4016 - Eau Claire Prehung SDM 3.9 TCR
NAICS-TCR Northeast Building Products Ford 3.9 TCR
NAICS-TCR Stanley Access Technologies Farmington 3.9 TCR
NAICS-TCR 96 3.9 TCR
STATE-SIZE James Diedrich Farms 23 FTE
STATE-SIZE Tri-Fanucchi Farms,LLC 23 FTE
STATE-SIZE KAN2 - 04 23 FTE
STATE-SIZE Kyer Farms 23 FTE
CITY-NEAR Mission Campus 6,222 FTE
CITY-NEAR Pure Storage 5,595 FTE
CITY-NEAR 2032-02120751 3,887 FTE
CITY-NEAR 0206-02620751 3,154 FTE
NAT-TCR County of Burke NC 3.9 TCR
NAT-TCR Mac, LLC 3.9 TCR
NAT-TCR Americold Fort Smith, AR 3.9 TCR
NAT-TCR Farmers Pride Inc / Bell & Evans Plant 2 3.9 TCR
NAT-SIZE MDC 23 FTE
NAT-SIZE 3160 Keystone 23 FTE
NAT-SIZE Denver Asphalt Plant 23 FTE
NAT-SIZE Carlyle Farms, LLC 23 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2021, 2020, 2019, 2018. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.