Graphite specialties for mechanical use (except gaskets) manufacturing · North Carolina
Morgan Advanced Materials and Technology, Inc. - Dunn, NC
Dunn, NC · ~51 workers · 3 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 0.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Morgan Advanced Materials and Technology, Inc. - Dunn, NC runs at 0% of its industry's injury rate - about level with the typical Graphite specialties for mechanical use (except gaskets) manufacturing workplace, earning a grade C.
Morgan Advanced Materials and Technology, Inc. - Dunn, NC: 0.0 TCR = 0% of Graphite specialties for mechanical use (except gaskets) manufacturing BLS 3.3 · 3y Form 300A (see methodology below)
Morgan Advanced Materials and Technology, Inc. - Dunn, NC safety composite
Morgan Advanced Materials and Technology, Inc. - Dunn, NC scores strongest on total case rate (tcr) (safer than 100% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
82/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- A 0 per 100 workers
Safer than 100% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 84% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Morgan Advanced Materials and Technology, Inc. - Dunn, NC held a steady TCR band
Morgan Advanced Materials and Technology, Inc. - Dunn, NC's TCR held near 0.0 from 0.0 in 2016 to 0.0 in 2019. Peak filing year was 2016 at 0.0 TCR.
2016=0.0 · 2017=0.0 · 2019=0.0
OSHA ITA Form 300A scorecard
Establishment book 335991 · Dunn, NC AT/BELOW-IND · SMALL
Grade C · TCR 0.0 · 0% of ind
- DART 0.0 DART
- RANK P100
- PHOTO Hexcel Corporation M…
- BOOK 3y book
- INJ 0 inj
- SIZE ~51 FTE
Nearest TCR peer: Hexcel Corporation Matrix (0.1 TCR gap)
Read with this employer → · Industry book → · North Carolina employers → · Look up another →
Morgan Advanced Materials and Technology, Inc. - Dunn, NC in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Toray Composit
Toray Composite Materials America Decatur Plant
0.4 TCR
- Toray Composit 0.3
Toray Composite Materials America, Inc.
0.3 TCR
- Corporate Head 0.3
Corporate Headquarters and Electrode Technology Center
0.3 TCR
- Hexcel Corpora 0.1
Hexcel Corporation Matrix
0.1 TCR
- This site 0
Morgan Advanced Materials and Technology, Inc. - Dunn, NC
0 TCR
What this shows Morgan Advanced Materials and Technology, Inc. - Dunn, NC averages 0.0 TCR (0% of the Graphite specialties for mechanical use (except gaskets) manufacturing BLS benchmark).
Morgan Advanced Materials and Technology, Inc. - Dunn, NC TCR series: 2016=0 · 2017=0 · 2019=0 · BLS 3.3
Where Morgan Advanced Materials and Technology, Inc. - Dunn, NC falls in its industry
93 Graphite specialties for mecha establishmentsSafer than 100% of graded establishments in this industry, whose median TCR is 3.2.
Morgan Advanced Materials and Technology, Inc. - Dunn, NC has fewer employees than the Graphite specialties for mechanical use median and a lower injury rate than the industry's median TCR of 3.2. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
335991 · NC · Dunn
93 Graphite specialties for mechanical use (except gaskets) manufacturing employers nationwide with a credible TCR · 16,981 rated employers in North Carolina with headcount on file · 80 employers in Dunn, NC · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Hexcel Corporation Matrix | 0.1 TCR |
| NAICS-TCR | Toray Composite Materials America, Inc. | 0.3 TCR |
| NAICS-TCR | Corporate Headquarters and Electrode Technology Center | 0.3 TCR |
| NAICS-TCR | Toray Composite Materials America Decatur Plant | 0.4 TCR |
| STATE-SIZE | Hawksridge Farms, Inc | 51 FTE |
| STATE-SIZE | Burlington Operations Center | 51 FTE |
| STATE-SIZE | DRB Group North Carolina LLC - Charlotte Division | 51 FTE |
| STATE-SIZE | All other sites Gastonia | 51 FTE |
| CITY-NEAR | Harnett Health System | 920 FTE |
| CITY-NEAR | 71041 | 725 FTE |
| CITY-NEAR | ADUSA Dist DC 04 Dunn NC | 703 FTE |
| CITY-NEAR | Dunn Distribution Center #6010 | 324 FTE |
| NAT-TCR | Columbus Health and Rehab | 0.0 TCR |
| NAT-TCR | Portsmouth NNSY Commissary | 0.0 TCR |
| NAT-TCR | Meijer | 0.0 TCR |
| NAT-TCR | GeoCare, Inc. DBA Home Instead Senior Care | 0.0 TCR |
| NAT-SIZE | 6 Ohio Drive | 51 FTE |
| NAT-SIZE | 113061-Ftl-Southside Sta | 51 FTE |
| NAT-SIZE | SVC - Vino Bello Sales Center | 51 FTE |
| NAT-SIZE | Seaford DE Hatchery | 51 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.