Ceramic fiber manufacturing · Georgia
Morgan Advanced Materials Thermal Ceramics Inc.
Augusta, GA · ~503 workers · 4 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 1.1
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Morgan Advanced Materials Thermal Ceramics Inc. runs at 33% of its industry's injury rate - far safer than the typical Ceramic fiber manufacturing workplace, earning a grade A.
- A
- Excellent Safety Record
- 1.1
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 23
- recordable injuries tracked
Grade compares Morgan Advanced Materials Thermal Ceramics Inc.'s OSHA Total Case Rate to the BLS industry benchmark across 4 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
Morgan Advanced Materials Thermal Ceramics Inc.'s yearly Total Case Rate, against the 3.3 industry benchmark.
Where Morgan Advanced Materials Thermal Ceramics Inc. falls in its industry
105 Ceramic fiber manufacturing establishmentsSafer than 69% of graded establishments in this industry, whose median TCR is 2.0.
Narrower to Georgia alone (the establishments it most directly competes with for workers and contracts): ranked #2 safest of 6 Ceramic fiber manufacturing employers in Georgia.
Morgan Advanced Materials Thermal Ceramics Inc. has an average TCR of 1.1, which is 33% of the industry average (3.3) for Ceramic fiber manufacturing. This is significantly better than average.
The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.
Trend analysis for Morgan Advanced Materials Thermal Ceramics Inc.
Between 2016 and 2019, Morgan Advanced Materials Thermal Ceramics Inc.'s Total Case Rate worsened from 0.9 to 1.5 recordable injuries per 100 full-time workers, a 68% increase across 3 years of OSHA reporting.
The safest year on record was 2016, at a TCR of 0.9, while 2019 saw the highest rate, at 1.5, a spread of 0.6 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 4 reporting years, Morgan Advanced Materials Thermal Ceramics Inc. recorded 23 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 4-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Morgan Advanced Materials Thermal Ceramics Inc.'s own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 327999 - Ceramic fiber manufacturing.
DART Rate, Transparent Calculation (2019)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
5 DART incidents × 200,000 ÷ 945,855 hours worked = 1.06 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Morgan Advanced Materials Thermal Ceramics Inc. (this establishment) | 1.10 | OSHA ITA Form 300A, 4-year avg |
| Synthetic stones, for gem stones and industrial use, manufacturing industry avg | 3.30 | BLS IIF, NAICS 327999 |
| Georgia state avg (all industries) | 4.11 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Morgan Advanced Materials Thermal Ceramics Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2019: 7 reportable incidents · 7 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2019 | 1.5 | 1.1 | 7 | 0 | 0 |
| 2018 | 1.0 | 1.0 | 5 | 0 | 0 |
| 2017 | 1.1 | 0.7 | 6 | 0 | 0 |
| 2016 | 0.9 | 0.5 | 5 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Morgan Advanced Materials Thermal Ceramics Inc.'s reported OSHA injury record, strong versus its Ceramic fiber manufacturing peers, but not a guarantee about any single site today.
- At 33% of the Ceramic fiber manufacturing benchmark, Morgan Advanced Materials Thermal Ceramics Inc. reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Ceramic fiber manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Morgan Advanced Materials Thermal Ceramics Inc.'s safety grade?
How many injuries has Morgan Advanced Materials Thermal Ceramics Inc. reported?
Similar Employers
Matched by safety record across the industry and by workforce size within Georgia - a different peer set than the category browse links below.
Similar TCR (~1.1)
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.
Related
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.