Titanium rolling, drawing, or extruding purchased metals or scrap · Pennsylvania
NF&M International, Inc.
Monaca, PA · ~71 workers · 9 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.3
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
NF&M International, Inc. runs at 162% of its industry's injury rate - more dangerous than the typical Titanium rolling, drawing, or extruding purchased metals or scrap workplace, earning a grade D.
NF&M International, Inc.: 5.3 TCR = 162% of Titanium rolling, drawing, or extruding purchased metals or scrap BLS 3.3 · 9y Form 300A (see methodology below)
NF&M International, Inc. safety composite
NF&M International, Inc. scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 23%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
30/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 5.33 per 100 workers
Safer than 24% of industry peers
- DART rate
- F 4.42 per 100 workers
Safer than 23% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
NF&M International, Inc.: 7.6 → 8.8 TCR
Peak year 2024 @ 8.8 TCR · DART/TCR 0.83× in 2024
NF&M International, Inc.'s TCR rose 1.3 from 7.6 in 2016 to 8.8 in 2024. In 2024, DART was 0.83× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 331491 · Monaca, PA ABOVE-IND · SMALL
Grade D · TCR 5.3 · 162% of ind
- DART 4.4 DART
- RANK #9/13
- PHOTO Vulcan GMS 1400
- BOOK 9y book
- INJ 34 inj
- SIZE ~71 FTE
Nearest TCR peer: Vulcan GMS 1400 (0.0 TCR gap)
Read with this employer → · Industry book → · Pennsylvania employers → · Look up another →
NF&M International, Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
NF&M International, Inc.
5.3 TCR
- Vulcan GMS 140
Vulcan GMS 1400
5.3 TCR
- Sunshine Minti
Sunshine Minting Inc- Nevada
5.2 TCR
- GSM Metals Inc
GSM Metals Inc
5.1 TCR
- Ventra
Ventra
5 TCR
What this shows NF&M International, Inc. averages 5.3 TCR (162% of the Titanium rolling, drawing, or extruding purchased metals or scrap BLS benchmark).
NF&M International, Inc. TCR series: 2016=7.6 · 2017=4.6 · 2018=5.5 · 2019=2.1 · 2020=6.2 · 2021=5.3 · 2022=3.8 · 2023=4 · 2024=8.8 · BLS 3.3
Where NF&M International, Inc. falls in its industry
113 Titanium rolling, drawing, or establishmentsSafer than 24% of graded establishments in this industry, whose median TCR is 3.1.
Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #9 safest of 13 Titanium rolling, drawing, or employers in Pennsylvania.
NF&M International, Inc. has fewer employees than the Titanium rolling, drawing, or extruding median and a higher injury rate than the industry's median TCR of 3.1. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 8.8 | 4.4 | 4 | 0 | 0 |
| 2023 | 4.0 | 2.0 | 2 | 0 | 0 |
| 2022 | 3.8 | 1.9 | 2 | 0 | 0 |
| 2021 | 5.3 | 5.3 | 3 | 0 | 0 |
| 2020 | 6.2 | 2.5 | 5 | 0 | 0 |
| 2019 | 2.1 | 2.1 | 2 | 0 | 0 |
| 2018 | 5.5 | 5.5 | 5 | 0 | 0 |
| 2017 | 4.6 | 4.6 | 4 | 0 | 0 |
| 2016 | 7.6 | 4.3 | 7 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
331491 · PA · Monaca
113 Titanium rolling, drawing, or extruding purchased metals or scrap employers nationwide with a credible TCR · 22,692 rated employers in Pennsylvania with headcount on file · 36 employers in Monaca, PA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Vulcan GMS 1400 | 5.3 TCR |
| NAICS-TCR | Sunshine Minting Inc- Nevada | 5.2 TCR |
| NAICS-TCR | GSM Metals Inc | 5.1 TCR |
| NAICS-TCR | Ventra | 5.0 TCR |
| STATE-SIZE | FarmaceuticalRX LLC PA | 71 FTE |
| STATE-SIZE | Hazleton | 71 FTE |
| STATE-SIZE | R.S. Mowery & Sons, Inc. | 71 FTE |
| STATE-SIZE | Hazleton Site Contractors | 71 FTE |
| CITY-NEAR | BrandSafway Industries, LLC - PA Chemical - Monaca | 537 FTE |
| CITY-NEAR | Anchor Hocking | 390 FTE |
| CITY-NEAR | WM 1883 | 383 FTE |
| CITY-NEAR | Shell Polymers Monaca | 380 FTE |
| NAT-TCR | Garom - Rome | 5.3 TCR |
| NAT-TCR | JNB Signs, Inc. | 5.3 TCR |
| NAT-TCR | ShopRite of Long Hill Plaza | 5.3 TCR |
| NAT-TCR | Ornra - Scs Portland Fsl | 5.3 TCR |
| NAT-SIZE | 102 Creve Coeur | 71 FTE |
| NAT-SIZE | Buckeye Plumbing, Inc | 71 FTE |
| NAT-SIZE | Suncoast Infrastructure Inc | 71 FTE |
| NAT-SIZE | Renk Seed Company | 71 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.