Employer · New Jersey
NJ075 Milford Corrugated
Milford, NJ · ~70 workers · 3 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
NJ075 Milford Corrugated runs at 179% of its industry's injury rate - more dangerous than the typical industry workplace, earning a grade D.
- D
- Poor Safety Record
- 5.9
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 13
- recordable injuries tracked
Grade compares NJ075 Milford Corrugated's OSHA Total Case Rate of 5.9 to the industry BLS benchmark of 3.3 (179% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
NJ075 Milford Corrugated's yearly Total Case Rate, against the 3.3 industry benchmark.
Where NJ075 Milford Corrugated falls in its industry
1,416 industry establishmentsSafer than 10% of graded establishments in this industry, whose median TCR is 2.2.
Narrower to New Jersey alone (the establishments it most directly competes with for workers and contracts): ranked #25 safest of 27 industry employers in New Jersey.
Trend analysis for NJ075 Milford Corrugated
Between 2022 and 2024, NJ075 Milford Corrugated's Total Case Rate worsened from 3.8 to 8.7 recordable injuries per 100 full-time workers, a 127% increase across 2 years of OSHA reporting.
The safest year on record was 2022, at a TCR of 3.8, while 2024 saw the highest rate, at 8.7, a spread of 4.9 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, NJ075 Milford Corrugated recorded 13 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 13 injuries, 1 illnesses shown on this page for NJ075 Milford Corrugated are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 322211 - industry classification.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
7 DART incidents × 200,000 ÷ 161,150 hours worked = 8.69 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| NJ075 Milford Corrugated (this establishment) | 5.90 | OSHA ITA Form 300A, 3-year avg |
| Boxes, corrugated and solid fiber, made from purchased paper or paperboard industry avg | 3.30 | BLS IIF, NAICS 322211 |
| New Jersey state avg (all industries) | 4.90 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by NJ075 Milford Corrugated to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 7 reportable incidents · 6 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 4 reportable incidents · 4 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 8.7 | 8.7 | 6 | 1 | 0 |
| 2023 | 5.2 | 3.9 | 4 | 0 | 0 |
| 2022 | 3.8 | 2.5 | 3 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on NJ075 Milford Corrugated's reported OSHA injury record versus its industry peers, not a verdict on whether any single site is safe today.
- At 179% of the industry benchmark, NJ075 Milford Corrugated reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider industry sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is NJ075 Milford Corrugated's safety grade?
How many injuries has NJ075 Milford Corrugated reported?
Similar Employers
Matched by safety record across the industry, by workforce size within New Jersey, and by nearby establishments in Milford - a different peer set than the category browse links below.
Similar TCR (~5.9)
Similar size (~70 workers)
Nearby in Milford
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.