Sheet Metal Work Manufacturing · Oregon

North America : JELD-WEN Engineering

Klamath Falls, OR · ~30 workers · 3 years of OSHA Injury Tracking Application data.

C
Average Safety Record
3.5
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

North America : JELD-WEN Engineering runs at 106% of its industry's injury rate - about level with the typical Sheet Metal Work Manufacturing workplace, earning a grade C.

North America : JELD-WEN Engineering: 3.5 TCR = 106% of Sheet Metal Work Manufacturing BLS 3.3 · 3y Form 300A (see methodology below)

North America : JELD-WEN Engineering safety composite

North America : JELD-WEN Engineering scores strongest on dart rate (safer than 83% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

67/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 3.5 per 100 workers

Safer than 63% of industry peers

DART rate
B 0 per 100 workers

Safer than 83% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

North America : JELD-WEN Engineering: 4.0 → 6.5 TCR

Peak year 2023 @ 6.5 TCR · DART/TCR 0× in 2023

North America : JELD-WEN Engineering's TCR rose 2.4 from 4.0 in 2021 to 6.5 in 2023. In 2023, DART was 0× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 332322 · Klamath Falls, OR ABOVE-IND · SMALL

Grade C · TCR 3.5 · 106% of ind

  • DART 0.0 DART
  • RANK #6/16
  • PHOTO Clipper Industries, …
  • BOOK 3y book
  • INJ 2 inj
  • SIZE ~30 FTE

Nearest TCR peer: Clipper Industries, Inc (0.0 TCR gap)

Read with this employer → · Industry book → · Oregon employers → · Look up another →

North America : JELD-WEN Engineering in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows North America : JELD-WEN Engineering averages 3.5 TCR (106% of the Sheet Metal Work Manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

North America : JELD-WEN Engineering TCR series: 2021=4 · 2022=0 · 2023=6.5 · BLS 3.3

Where North America : JELD-WEN Engineering falls in its industry

1,158 Sheet Metal Work Manufacturing establishments

Safer than 63% of graded establishments in this industry, whose median TCR is 4.5.

More dangerous than peersSafer than peers

Narrower to Oregon alone (the establishments it most directly competes with for workers and contracts): ranked #6 safest of 16 Sheet Metal Work Manufacturing employers in Oregon.

North America : JELD-WEN Engineering (30 employees, TCR 3.5) among 29 same-industry peers, split at the industry median of 58 employees and a TCR of 4.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 050100150200 05101520 Average employees Total Case Rate North America : JELD-WEN Engineering
North America : JELD-WEN Engineering (30 employees, TCR 3.5) among 29 same-industry peers, split at the industry median of 58 employees and a TCR of 4.5

North America : JELD-WEN Engineering has fewer employees than the Sheet Metal Work Manufacturing median and a lower injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 6.5 0.0 2 0 0
2022 0.0 0.0 0 0 0
2021 4.0 0.0 0 1 0

OSHA ITA peer cross-reference

Establishment peer ledger

332322 · OR · Klamath Falls

1,158 Sheet Metal Work Manufacturing employers nationwide with a credible TCR · 8,031 rated employers in Oregon with headcount on file · 112 employers in Klamath Falls, OR · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Clipper Industries, Inc 3.5 TCR
NAICS-TCR The Lyons Companies 3.5 TCR
NAICS-TCR Escofab, Inc. 3.5 TCR
NAICS-TCR METALfx 3.5 TCR
STATE-SIZE Siri Produce Inc. (Jack) 30 FTE
STATE-SIZE Sweetheart Orchards, LLC 30 FTE
STATE-SIZE Pacific Botanicals 30 FTE
STATE-SIZE Coos Bay Area 30 FTE
CITY-NEAR Sky Lakes Medical Center, Inc. 1,480 FTE
CITY-NEAR 0007 - US Products Admin 631 FTE
CITY-NEAR ED Staub & Sons 582 FTE
CITY-NEAR Ed Staub & Sons Petroleum Inc. 548 FTE
NAT-TCR JSK Lumber Inc 3.5 TCR
NAT-TCR East Rutherford, NJ 3.5 TCR
NAT-TCR Allied Waste Services of North America LLC 3.5 TCR
NAT-TCR IME Industrial Metal Enterprises, LLC 3.5 TCR
NAT-SIZE Cleveland Construction & Design, LLC 30 FTE
NAT-SIZE 16 - Walsh Infrastructure Management, LLC 30 FTE
NAT-SIZE Meurice Garment Care 30 FTE
NAT-SIZE Gallo Construction Corp 30 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2022, 2021. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.