Sheet, aluminum, made in integrated secondary smelting and flat rolling mills · Iowa
Novelis ALR Aluminum LLC (Davenport Finishing)
Davenport, IA · ~105 workers · 2 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 0.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Novelis ALR Aluminum LLC (Davenport Finishing) runs at 25% of its industry's injury rate - far safer than the typical Sheet, aluminum, made in integrated secondary smelting and flat rolling mills workplace, earning a grade A.
Novelis ALR Aluminum LLC (Davenport Finishing): 0.8 TCR = 25% of Sheet, aluminum, made in integrated secondary smelting and flat rolling mills BLS 3.3 · 2y Form 300A (see methodology below)
Novelis ALR Aluminum LLC (Davenport Finishing) safety composite
Novelis ALR Aluminum LLC (Davenport Finishing) scores strongest on total case rate (tcr) (safer than 83% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
66/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- B 0.84 per 100 workers
Safer than 83% of industry peers
- DART rate
- C 0.84 per 100 workers
Safer than 56% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Novelis ALR Aluminum LLC (Davenport Finishing) held a steady TCR band
Novelis ALR Aluminum LLC (Davenport Finishing)'s TCR held near 0.0 from 0.8 in 2021 to 0.8 in 2023. Peak filing year was 2021 at 0.8 TCR. In 2023, DART was 1× this establishment's average TCR (severity share of cases).
2021=0.8 · 2023=0.8
OSHA ITA Form 300A scorecard
Establishment book 331315 · Davenport, IA AT/BELOW-IND · MID
Grade A · TCR 0.8 · 25% of ind
- DART 0.8 DART
- RANK P83
- PHOTO Louisville Foil Plant
- BOOK 2y book
- INJ 2 inj
- SIZE ~105 FTE
Nearest TCR peer: Louisville Foil Plant (0.0 TCR gap)
Read with this employer → · Industry book → · Iowa employers → · Look up another →
Novelis ALR Aluminum LLC (Davenport Finishing) in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Nichols Alumin
Nichols Aluminum Casting
0.9 TCR
- This site
Novelis ALR Aluminum LLC (Davenport Finishing)
0.8 TCR
- Louisville Foi
Louisville Foil Plant
0.8 TCR
- Novelis Oswego
Novelis Oswego Works
0.8 TCR
- Novelis Corpor
Novelis Corportaion
0.8 TCR
What this shows Novelis ALR Aluminum LLC (Davenport Finishing) averages 0.8 TCR (25% of the Sheet, aluminum, made in integrated secondary smelting and flat rolling mills BLS benchmark).
Novelis ALR Aluminum LLC (Davenport Finishing) TCR series: 2021=0.8 · 2023=0.8 · BLS 3.3
Where Novelis ALR Aluminum LLC (Davenport Finishing) falls in its industry
70 Sheet, aluminum, made in integ establishmentsSafer than 83% of graded establishments in this industry, whose median TCR is 2.4.
Novelis ALR Aluminum LLC (Davenport Finishing) has fewer employees than the Sheet, aluminum, made in integrated seco median and a lower injury rate than the industry's median TCR of 2.4. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 0.8 | 0.8 | 1 | 0 | 0 |
| 2021 | 0.8 | 0.8 | 1 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
331315 · IA · Davenport
70 Sheet, aluminum, made in integrated secondary smelting and flat rolling mills employers nationwide with a credible TCR · 7,192 rated employers in Iowa with headcount on file · 284 employers in Davenport, IA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Louisville Foil Plant | 0.8 TCR |
| NAICS-TCR | Novelis Oswego Works | 0.8 TCR |
| NAICS-TCR | Nichols Aluminum Casting | 0.9 TCR |
| NAICS-TCR | Novelis Corportaion | 0.8 TCR |
| STATE-SIZE | Dallas County Service Center | 105 FTE |
| STATE-SIZE | EPI Power, LLC. - Microsoft DSM 14 Project | 105 FTE |
| STATE-SIZE | Rasmussen Mechanical Services Council Bluffs | 105 FTE |
| STATE-SIZE | Mittera - Rock Communications Plant 1 | 105 FTE |
| CITY-NEAR | MercyOne-Genesis, East Hospital-MHS-IA/NE | 2,129 FTE |
| CITY-NEAR | Genesis Medical Center East Campus | 1,704 FTE |
| CITY-NEAR | John Deere Davenport Works | 1,394 FTE |
| CITY-NEAR | Amazon.com Services LLC - MLI1 | 1,353 FTE |
| NAT-TCR | Compassus - San Antonio | 0.8 TCR |
| NAT-TCR | Heat and Control Union MO | 0.8 TCR |
| NAT-TCR | Public Health & Clinical Services | 0.8 TCR |
| NAT-TCR | Thatcher Unified School District No. 4 | 0.8 TCR |
| NAT-SIZE | 2032 - Modesto | 105 FTE |
| NAT-SIZE | Rochelle South Caron | 105 FTE |
| NAT-SIZE | Hanes Erie, Inc. | 105 FTE |
| NAT-SIZE | BAL Baltimore | 105 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.