Airlocks, fabricated metal plate work, manufacturing · Tennessee
Nucor
Memphis, TN · ~429 workers · 2 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 1.3
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Nucor runs at 40% of its industry's injury rate - far safer than the typical Airlocks, fabricated metal plate work, manufacturing workplace, earning a grade A.
- A
- Excellent Safety Record
- 1.3
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 12
- recordable injuries tracked
Grade compares Nucor's OSHA Total Case Rate of 1.3 to the Airlocks, fabricated metal plate work, manufacturing BLS benchmark of 3.3 (40% of benchmark) across 2 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
Nucor's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Nucor falls in its industry
470 Airlocks, fabricated metal pla establishmentsSafer than 84% of graded establishments in this industry, whose median TCR is 4.2.
Narrower to Tennessee alone (the establishments it most directly competes with for workers and contracts): ranked #1 safest of 18 Airlocks, fabricated metal pla employers in Tennessee.
Trend analysis for Nucor
Between 2018 and 2019, Nucor's Total Case Rate worsened from 1.1 to 1.5 recordable injuries per 100 full-time workers, a 37% increase across 1 year of OSHA reporting.
The safest year on record was 2018, at a TCR of 1.1, while 2019 saw the highest rate, at 1.5, a spread of 0.4 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Nucor recorded 12 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 12 injuries, 2 illnesses shown on this page for Nucor are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332313 - Airlocks, fabricated metal plate work, manufacturing.
DART Rate, Transparent Calculation (2019)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
5 DART incidents × 200,000 ÷ 1,045,164 hours worked = 0.96 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Nucor (this establishment) | 1.33 | OSHA ITA Form 300A, 2-year avg |
| Fabricated plate work manufacturing industry avg | 3.30 | BLS IIF, NAICS 332313 |
| Tennessee state avg (all industries) | 4.09 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Nucor to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2019: 8 reportable incidents · 7 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 6 reportable incidents · 5 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2019 | 1.5 | 1.0 | 7 | 1 | 0 |
| 2018 | 1.1 | 0.0 | 5 | 1 | 0 |
What this grade means for you
Use this grade as a relative read on Nucor's reported OSHA injury record, strong versus its Airlocks, fabricated metal plate work, manufacturing peers, but not a guarantee about any single site today.
- At 40% of the Airlocks, fabricated metal plate work, manufacturing benchmark, Nucor reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Airlocks, fabricated metal plate work, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Nucor's safety grade?
How many injuries has Nucor reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Tennessee, and by nearby establishments in Memphis - a different peer set than the category browse links below.
Similar TCR (~1.3)
Similar size (~429 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.