Aluminum tube made by drawing or extruding purchased aluminum · Texas

Oldcastle Building Envelope Terrell

Terrell, TX · ~532 workers · 4 years of OSHA Injury Tracking Application data.

Compiled by PlainSafetyScore Editorial, Employer Workplace Safety Editorial Team · May 15, 2026

A
Excellent Safety Record: 0.7
Avg TCR: 3.3
Industry avg: 0
Fatalities

The verdict

Oldcastle Building Envelope Terrell runs at 20% of its industry's injury rate - far safer than the typical Aluminum tube made by drawing or extruding purchased aluminum workplace, earning a grade A.

A
Excellent Safety Record: 0.7
avg TCR · per 100 workers: 3.3
industry benchmark (BLS): 13
recordable injuries tracked

Grade compares Oldcastle Building Envelope Terrell's OSHA Total Case Rate of 0.7 to the Aluminum tube made by drawing or extruding purchased aluminum BLS benchmark of 3.3 (20% of benchmark) across 4 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Oldcastle Building Envelope Terrell's yearly Total Case Rate, against the 3.3 industry benchmark.

Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 331318.

Where Oldcastle Building Envelope Terrell falls in its industry

208 Aluminum tube made by drawing establishments

Safer than 91% of graded establishments in this industry, whose median TCR is 2.8.

Grade A

More dangerous than peersSafer than peers

Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #1 safest of 12 Aluminum tube made by drawing employers in Texas.

Trend analysis for Oldcastle Building Envelope Terrell

Between 2016 and 2020, Oldcastle Building Envelope Terrell's Total Case Rate improved from 0.6 to 0.4 recordable injuries per 100 full-time workers, a 36% decrease across 4 years of OSHA reporting.

The safest year on record was 2020, at a TCR of 0.4, while 2018 saw the highest rate, at 1.2, a spread of 0.9 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 4 reporting years, Oldcastle Building Envelope Terrell recorded 13 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 4-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 13 injuries, 2 illnesses shown on this page for Oldcastle Building Envelope Terrell are sourced from its own 4 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331318 - Aluminum tube made by drawing or extruding purchased aluminum.

DART Rate, Transparent Calculation (2020)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

1 DART incidents × 200,000 ÷ 1,115,710 hours worked = 0.18 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark	TCR	Source
Oldcastle Building Envelope Terrell (this establishment)	0.67	OSHA ITA Form 300A, 4-year avg
Aluminum bar made by extruding purchased aluminum industry avg	3.30	BLS IIF, NAICS 331318
Texas state avg (all industries)	3.73	OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Oldcastle Building Envelope Terrell to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

2020: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
2019: 3 reportable incidents · 2 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
2018: 7 reportable incidents · 7 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
2016: 3 reportable incidents · 2 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year	TCR	DART	Injuries	Illnesses
2020	0.4	0.2	2	0
2019	0.5	0.2	2	1
2018	1.2	0.5	7	0
2016	0.6	0.4	2	1

What this grade means for you

Use this grade as a relative read on Oldcastle Building Envelope Terrell's reported OSHA injury record, strong versus its Aluminum tube made by drawing or extruding purchased aluminum peers, but not a guarantee about any single site today.

At 20% of the Aluminum tube made by drawing or extruding purchased aluminum benchmark, Oldcastle Building Envelope Terrell reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
Judge this record against the wider Aluminum tube made by drawing or extruding purchased aluminum sector, where injury rates vary widely, before comparing it in isolation. See the industry
Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Oldcastle Building Envelope Terrell's safety grade?

Oldcastle Building Envelope Terrell has a safety grade of A (Excellent Safety Record). This grade is based on their average Total Case Rate (TCR) of 0.7 compared to the BLS industry benchmark of 3.3 for Aluminum tube made by drawing or extruding purchased aluminum.

How many injuries has Oldcastle Building Envelope Terrell reported?

Oldcastle Building Envelope Terrell has reported 13 total injuries and 0 fatalities across 4 years of OSHA data (2020, 2019, 2018, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Texas, and by nearby establishments in Terrell - a different peer set than the category browse links below.

Similar TCR (~0.7)

Similar size (~532 workers)

Nearby in Terrell

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2020, 2019, 2018, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.