Custom architectural millwork and fixtures, manufacturing on a job shop basis · North Carolina

ONSITE - North Carolina

Name: ONSITE - North Carolina Workplace Safety Data
Creator: PlainSafetyScore
License: https://creativecommons.org/publicdomain/zero/1.0/

Charlotte, NC · ~13 workers · 6 years of OSHA Injury Tracking Application data.

Compiled by PlainSafetyScore · August 25, 2026

B
Good Safety Record: 1.8
Avg TCR: 3.3
Industry avg: 0
Fatalities

Subscribe to safety-record updates (RSS)

The verdict

ONSITE - North Carolina runs at 54% of its industry's injury rate - safer than the typical Custom architectural millwork and fixtures, manufacturing on a job shop basis workplace, earning a grade B.

ONSITE - North Carolina: 1.8 TCR = 54% of Custom architectural millwork and fixtures, manufacturing on a job shop basis BLS 3.3 · 6y Form 300A (see methodology below)

ONSITE - North Carolina safety composite

ONSITE - North Carolina scores strongest on total case rate (tcr) (safer than 79% of same-industry peers) and weakest on fatalities (safer than 50%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

71/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR): B 1.79 per 100 workers

Safer than 79% of industry peers
DART rate: B 0 per 100 workers

Safer than 78% of industry peers
Fatalities: D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−4.5

2017→2022

ONSITE - North Carolina injury rate improved

ONSITE - North Carolina's TCR fell 4.5 from 4.5 in 2017 to 0.0 in 2022. Peak filing year was 2019 at 6.2 TCR. In 2022, DART was 0× this establishment's average TCR (severity share of cases).

2017=4.5 · 2018=0.0 · 2019=6.2 · 2020=0.0 · 2021=0.0 · 2022=0.0

OSHA ITA Form 300A scorecard

Establishment book 337212 · Charlotte, NC AT/BELOW-IND · SMALL

Grade B · TCR 1.8 · 54% of ind

DART 0.0 DART
RANK #4/9
PHOTO Round Rock TX Millwork
BOOK 6y book
INJ 2 inj
SIZE ~13 FTE

Nearest TCR peer: Round Rock TX Millwork (0.0 TCR gap)

Read with this employer → · Industry book → · North Carolina employers → · Look up another →

This site

1.8
Round Rock TX

1.8
PGS Millwork,

1.8
Knoll Inc.

1.8
Commercial Fix

1.8

What this shows ONSITE - North Carolina averages 1.8 TCR (54% of the Custom architectural millwork and fixtures, manufacturing on a job shop basis BLS benchmark).

ONSITE - North Carolina TCR series: 2017=4.5 · 2018=0 · 2019=6.2 · 2020=0 · 2021=0 · 2022=0 · BLS 3.3

Where ONSITE - North Carolina falls in its industry

371 Custom architectural millwork establishments

Safer than 79% of graded establishments in this industry, whose median TCR is 3.9.

Grade B

More dangerous than peersSafer than peers

Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #4 safest of 9 Custom architectural millwork employers in North Carolina.

ONSITE - North Carolina (13 employees, TCR 1.8) among 29 same-industry peers, split at the industry median of 45 employees and a TCR of 3.9

ONSITE - North Carolina has fewer employees than the Custom architectural millwork and fixtur median and a lower injury rate than the industry's median TCR of 3.9. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year	TCR	DART	Injuries
2022	0.0	0.0	0
2021	0.0	0.0	0
2020	0.0	0.0	0
2019	6.2	6.2	1
2018	0.0	0.0	0
2017	4.5	0.0	1

OSHA ITA peer cross-reference

Establishment peer ledger

337212 · NC · Charlotte

371 Custom architectural millwork and fixtures, manufacturing on a job shop basis employers nationwide with a credible TCR · 16,981 rated employers in North Carolina with headcount on file · 2,058 employers in Charlotte, NC · 4 cross-state NAT-TCR peers. Closest matches by relationship code are listed below.

Rel	Establishment	Place	Metric
NAICS-TCR	Round Rock TX Millwork	ROUND ROCK, TX	1.8 TCR
NAICS-TCR	PGS Millwork, Inc.	HUDSON, NY	1.8 TCR
NAICS-TCR	Knoll Inc.	EAST GREENVILLE, PA	1.8 TCR
NAICS-TCR	Commercial Fixtures Inc	SAINT PAUL, MN	1.8 TCR
STATE-SIZE	Harvey Produce	KINSTON	13 FTE
STATE-SIZE	Super-Sod Cary	CARY	13 FTE
STATE-SIZE	Kinston Fibers	KINSTON	13 FTE
STATE-SIZE	Pitt County Gin	BETHEL	13 FTE
CITY-NEAR	1101-Carolinas Medical Center (1101)	Charlotte	8,444 FTE
CITY-NEAR	0001-Carolinas Medical Center	Charlotte	8,032 FTE
CITY-NEAR	4795-AA-CLT-CHARLOTTE-CLT-TRML	Charlotte	7,295 FTE
CITY-NEAR	Novant Health Presbyterian Medical Center	Charlotte	4,973 FTE
NAT-TCR	Fulton Medical Clinic	Fulton, MS	1.8 TCR
NAT-TCR	Radial Richwood #1	Walton, KY	1.8 TCR
NAT-TCR	Shumaker Trucking and Excavating Contractors, Inc.	Great Falls, MT	1.8 TCR
NAT-TCR	4192-00051423-BRE	Brea, CA	1.8 TCR

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2022, 2021, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.