Pallets, wood or wood and metal combination, manufacturing · North Carolina
Pallet Consultants of NC Dunn
Dunn, NC · ~31 workers · 3 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.4
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Pallet Consultants of NC Dunn runs at 74% of its industry's injury rate - safer than the typical Pallets, wood or wood and metal combination, manufacturing workplace, earning a grade B.
- B
- Good Safety Record
- 2.4
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 2
- recordable injuries tracked
Grade compares Pallet Consultants of NC Dunn's OSHA Total Case Rate of 2.4 to the Pallets, wood or wood and metal combination, manufacturing BLS benchmark of 3.3 (74% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Pallet Consultants of NC Dunn's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Pallet Consultants of NC Dunn falls in its industry
1,011 Pallets, wood or wood and meta establishmentsSafer than 82% of graded establishments in this industry, whose median TCR is 6.0.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #10 safest of 42 Pallets, wood or wood and meta employers in North Carolina.
Trend analysis for Pallet Consultants of NC Dunn
Between 2019 and 2021, Pallet Consultants of NC Dunn's Total Case Rate held roughly steady from 0.0 to 3.7 recordable injuries per 100 full-time workers, a 0% change across 2 years of OSHA reporting.
The safest year on record was 2019, at a TCR of 0.0, while 2021 saw the highest rate, at 3.7, a spread of 3.7 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, Pallet Consultants of NC Dunn recorded 2 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 2 injuries shown on this page for Pallet Consultants of NC Dunn are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 321920 - Pallets, wood or wood and metal combination, manufacturing.
DART Rate, Transparent Calculation (2021)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 53,859 hours worked = 3.71 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Pallet Consultants of NC Dunn (this establishment) | 2.44 | OSHA ITA Form 300A, 3-year avg |
| Skids and pallets, wood or wood and metal combination, manufacturing industry avg | 3.30 | BLS IIF, NAICS 321920 |
| North Carolina state avg (all industries) | 3.89 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Pallet Consultants of NC Dunn to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2021: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2021 | 3.7 | 3.7 | 1 | 0 | 0 |
| 2020 | 3.6 | 3.6 | 1 | 0 | 0 |
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Pallet Consultants of NC Dunn's reported OSHA injury record, strong versus its Pallets, wood or wood and metal combination, manufacturing peers, but not a guarantee about any single site today.
- At 74% of the Pallets, wood or wood and metal combination, manufacturing benchmark, Pallet Consultants of NC Dunn reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Pallets, wood or wood and metal combination, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Pallet Consultants of NC Dunn's safety grade?
How many injuries has Pallet Consultants of NC Dunn reported?
Similar Employers
Matched by safety record across the industry, by workforce size within North Carolina, and by nearby establishments in Dunn - a different peer set than the category browse links below.
Similar TCR (~2.4)
Similar size (~31 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.