Calendering machinery for plastics manufacturing · New York
Pearl Technologies Inc.
Savannah, NY · ~46 workers · 9 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Pearl Technologies Inc. runs at 175% of its industry's injury rate - more dangerous than the typical Calendering machinery for plastics manufacturing workplace, earning a grade D.
Pearl Technologies Inc.: 5.8 TCR = 175% of Calendering machinery for plastics manufacturing BLS 3.3 · 9y Form 300A (see methodology below)
Pearl Technologies Inc. safety composite
Pearl Technologies Inc. scores strongest on dart rate (safer than 79% of same-industry peers) and weakest on total case rate (tcr) (safer than 21%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
49/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 5.76 per 100 workers
Safer than 21% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 79% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−5.0
2016→2024
Pearl Technologies Inc. injury rate improved
Pearl Technologies Inc.'s TCR fell 5.0 from 7.1 in 2016 to 2.1 in 2024. Peak filing year was 2021 at 21.9 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
2016=7.1 · 2017=4.5 · 2018=4.8 · 2019=0.0 · 2020=4.8 · 2021=21.9 · 2022=2.2 · 2023=4.4 · 2024=2.1
OSHA ITA Form 300A scorecard
Establishment book 333249 · Savannah, NY ABOVE-IND · SMALL
Grade D · TCR 5.8 · 175% of ind
- DART 0.0 DART
- RANK #18/20
- PHOTO Ruffin Mill
- BOOK 9y book
- INJ 11 inj
- SIZE ~46 FTE
Nearest TCR peer: Ruffin Mill (0.0 TCR gap)
Read with this employer → · Industry book → · New York employers → · Look up another →
Pearl Technologies Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- HF rubber mach
HF rubber machinery
5.9 TCR
- This site
Pearl Technologies Inc.
5.8 TCR
- Ruffin Mill
Ruffin Mill
5.8 TCR
- Magnum Plastic
Magnum Plastics Inc
5.8 TCR
- Bristol
Bristol
5.7 TCR
What this shows Pearl Technologies Inc. averages 5.8 TCR (175% of the Calendering machinery for plastics manufacturing BLS benchmark).
Pearl Technologies Inc. TCR series: 2016=7.1 · 2017=4.5 · 2018=4.8 · 2019=0 · 2020=4.8 · 2021=21.9 · 2022=2.2 · 2023=4.4 · 2024=2.1 · BLS 3.3
Where Pearl Technologies Inc. falls in its industry
448 Calendering machinery for plas establishmentsSafer than 21% of graded establishments in this industry, whose median TCR is 3.0.
Narrower to New York alone (the establishments it most directly competes with for workers and contracts): ranked #18 safest of 20 Calendering machinery for plas employers in New York.
Pearl Technologies Inc. has fewer employees than the Calendering machinery for plastics manuf median and a higher injury rate than the industry's median TCR of 3.0. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 2.1 | 0.0 | 1 | 0 | 0 |
| 2023 | 4.4 | 2.2 | 2 | 0 | 0 |
| 2022 | 2.2 | 0.0 | 1 | 0 | 0 |
| 2021 | 21.9 | 17.1 | 0 | 9 | 0 |
| 2020 | 4.8 | 0.0 | 0 | 2 | 0 |
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2018 | 4.8 | 0.0 | 2 | 0 | 0 |
| 2017 | 4.5 | 2.3 | 2 | 0 | 0 |
| 2016 | 7.1 | 2.4 | 3 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
333249 · NY · Savannah
448 Calendering machinery for plastics manufacturing employers nationwide with a credible TCR · 21,008 rated employers in New York with headcount on file · 5 employers in Savannah, NY · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Ruffin Mill | 5.8 TCR |
| NAICS-TCR | Bristol | 5.7 TCR |
| NAICS-TCR | Magnum Plastics Inc | 5.8 TCR |
| NAICS-TCR | HF rubber machinery | 5.9 TCR |
| STATE-SIZE | Zuber Farms LLC | 46 FTE |
| STATE-SIZE | Belltown Dairy | 46 FTE |
| STATE-SIZE | EL-VI Farms,LLC | 46 FTE |
| STATE-SIZE | Hudson Valley Fish Farm Inc | 46 FTE |
| CITY-NEAR | A-Verdi COS LLC | 102 FTE |
| CITY-NEAR | Pure Functional Foods | 31 FTE |
| CITY-NEAR | 08-Savannah | 26 FTE |
| CITY-NEAR | Secor Lumber | 15 FTE |
| NAT-TCR | S&W Cabinets, Inc. Commercial | 5.8 TCR |
| NAT-TCR | Stock Yards Spokane | 5.8 TCR |
| NAT-TCR | Mission Point of Beverly Hills | 5.8 TCR |
| NAT-TCR | Electric Motor Supply | 5.8 TCR |
| NAT-SIZE | Southern Shutter Co. | 46 FTE |
| NAT-SIZE | Dedicated Lancaster | 46 FTE |
| NAT-SIZE | SF2 | 46 FTE |
| NAT-SIZE | Modern Metal Finishing | 46 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.