Sheet metal duct work installation · Indiana

Poynter Sheet Metal, Inc. at Eli Lilly Technology Center

Indianapolis, IN · ~23 workers · 2 years of OSHA Injury Tracking Application data.

B
Good Safety Record
2.0
Avg TCR
2.8
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Poynter Sheet Metal, Inc. at Eli Lilly Technology Center runs at 73% of its industry's injury rate - safer than the typical Sheet metal duct work installation workplace, earning a grade B.

Poynter Sheet Metal, Inc. at Eli Lilly Technology Center: 2.0 TCR = 73% of Sheet metal duct work installation BLS 2.8 · 2y Form 300A (see methodology below)

Poynter Sheet Metal, Inc. at Eli Lilly Technology Center safety composite

Poynter Sheet Metal, Inc. at Eli Lilly Technology Center scores strongest on dart rate (safer than 80% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

68/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 2.03 per 100 workers

Safer than 68% of industry peers

DART rate
B 0 per 100 workers

Safer than 80% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

Poynter Sheet Metal, Inc. at Eli Lilly Technology Center: 0.0 → 4.1 TCR

Peak year 2018 @ 4.1 TCR · DART/TCR 0× in 2018

Poynter Sheet Metal, Inc. at Eli Lilly Technology Center's TCR rose 4.1 from 0.0 in 2016 to 4.1 in 2018. In 2018, DART was 0× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 238220 · Indianapolis, IN AT/BELOW-IND · SMALL

Grade B · TCR 2.0 · 73% of ind

  • DART 0.0 DART
  • RANK #42/130
  • PHOTO Mechanical Specialis…
  • BOOK 2y book
  • INJ 1 inj
  • SIZE ~23 FTE

Nearest TCR peer: Mechanical Specialists, Inc. (0.0 TCR gap)

Read with this employer → · Industry book → · Indiana employers → · Look up another →

Poynter Sheet Metal, Inc. at Eli Lilly Technology Center in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Poynter Sheet Metal, Inc. at Eli Lilly Technology Center averages 2.0 TCR (73% of the Sheet metal duct work installation BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-09-26

Poynter Sheet Metal, Inc. at Eli Lilly Technology Center TCR series: 2016=0 · 2018=4.1 · BLS 2.8

Where Poynter Sheet Metal, Inc. at Eli Lilly Technology Center falls in its industry

5,793 Sheet metal duct work installa establishments

Safer than 68% of graded establishments in this industry, whose median TCR is 3.3.

More dangerous than peersSafer than peers

Narrower to Indiana alone (the establishments it most directly competes with for workers and contracts): ranked #42 safest of 130 Sheet metal duct work installa employers in Indiana.

Poynter Sheet Metal, Inc. at Eli Lilly Technology Center (23 employees, TCR 2.0) among 29 same-industry peers, split at the industry median of 60 employees and a TCR of 3.3 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 050100150200250 05101520 Average employees Total Case Rate Poynter Sheet Metal, Inc. at Eli Lilly Technology Center
Poynter Sheet Metal, Inc. at Eli Lilly Technology Center (23 employees, TCR 2.0) among 29 same-industry peers, split at the industry median of 60 employees and a TCR of 3.3

Poynter Sheet Metal, Inc. at Eli Lilly Technology Center has fewer employees than the Sheet metal duct work installation median and a lower injury rate than the industry's median TCR of 3.3. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2018 4.1 0.0 1 0 0
2016 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

238220 · IN · Indianapolis

5,793 Sheet metal duct work installation employers nationwide with a credible TCR · 12,750 rated employers in Indiana with headcount on file · 2,074 employers in Indianapolis, IN · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Mechanical Specialists, Inc. 2.0 TCR
NAICS-TCR JND Mechanical 2.0 TCR
NAICS-TCR Advanced Refrigeration Air Orlando 2.0 TCR
NAICS-TCR WCA Group, LLC Office 2.0 TCR
STATE-SIZE Bone Dry Roofing - Lafayette 23 FTE
STATE-SIZE Dahm Brothers, Inc. 23 FTE
STATE-SIZE FREEDOM HEATING & PLUMBING, INC. 23 FTE
STATE-SIZE RBA 23 FTE
CITY-NEAR Indiana University Health, Inc 7,874 FTE
CITY-NEAR Methodist Hospital 6,862 FTE
CITY-NEAR Eli Lilly - Lilly Corp Center 6,482 FTE
CITY-NEAR Lilly Technology Center 6,472 FTE
NAT-TCR North Jersey Pool Management, LLC - NNJ 2.0 TCR
NAT-TCR John Bean Technologies Corporation MIA 2.0 TCR
NAT-TCR Flint CCA 2.0 TCR
NAT-TCR Highland 2.0 TCR
NAT-SIZE Holiday Inn Crestview 23 FTE
NAT-SIZE 0034 - Lakewood, Ca 23 FTE
NAT-SIZE 0060 - Austin, Tx 23 FTE
NAT-SIZE 0062 - Fort Collins, Co 23 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2018, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.