Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe · Ohio
Precision Bending Technology dba STAM
Mentor, OH · ~27 workers · 3 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 6.3
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Precision Bending Technology dba STAM runs at 190% of its industry's injury rate - more dangerous than the typical Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe workplace, earning a grade D.
Precision Bending Technology dba STAM: 6.3 TCR = 190% of Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe BLS 3.3 · 3y Form 300A (see methodology below)
Precision Bending Technology dba STAM safety composite
Precision Bending Technology dba STAM scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on dart rate (safer than 5%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
23/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 6.28 per 100 workers
Safer than 21% of industry peers
- DART rate
- F 8.41 per 100 workers
Safer than 5% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Precision Bending Technology dba STAM: 0.0 → 14.0 TCR
Peak year 2023 @ 14.0 TCR · DART/TCR 1.34× in 2023
Precision Bending Technology dba STAM's TCR rose 14.0 from 0.0 in 2020 to 14.0 in 2023. In 2023, DART was 1.34× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332996 · Mentor, OH ABOVE-IND · SMALL
Grade D · TCR 6.3 · 190% of ind
- DART 8.4 DART
- RANK #18/21
- PHOTO ESI Winchester
- BOOK 3y book
- INJ 6 inj
- SIZE ~27 FTE
Nearest TCR peer: ESI Winchester (0.0 TCR gap)
Read with this employer → · Industry book → · Ohio employers → · Look up another →
Precision Bending Technology dba STAM in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Seah Steel USA
Seah Steel USA, LLC P2
6.4 TCR
- This site
Precision Bending Technology dba STAM
6.3 TCR
- ESI Winchester
ESI Winchester
6.3 TCR
- Arctic Fox
Arctic Fox
6.3 TCR
- C&B Piping, In
C&B Piping, Inc.
6.3 TCR
What this shows Precision Bending Technology dba STAM averages 6.3 TCR (190% of the Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe BLS benchmark).
Precision Bending Technology dba STAM TCR series: 2020=0 · 2021=4.8 · 2023=14 · BLS 3.3
Where Precision Bending Technology dba STAM falls in its industry
337 Pipe fabricating (i.e., bendin establishmentsSafer than 21% of graded establishments in this industry, whose median TCR is 3.3.
Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #18 safest of 21 Pipe fabricating (i.e., bendin employers in Ohio.
Precision Bending Technology dba STAM has fewer employees than the Pipe fabricating (i.e., bending, cutting median and a higher injury rate than the industry's median TCR of 3.3. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 14.0 | 8.4 | 5 | 0 | 0 |
| 2021 | 4.8 | 4.8 | 1 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332996 · OH · Mentor
337 Pipe fabricating (i.e., bending, cutting, threading) made from purchased metal pipe employers nationwide with a credible TCR · 22,650 rated employers in Ohio with headcount on file · 180 employers in Mentor, OH · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | ESI Winchester | 6.3 TCR |
| NAICS-TCR | Arctic Fox | 6.3 TCR |
| NAICS-TCR | C&B Piping, Inc. | 6.3 TCR |
| NAICS-TCR | Seah Steel USA, LLC P2 | 6.4 TCR |
| STATE-SIZE | Jeff Creque Farms Inc | 27 FTE |
| STATE-SIZE | White Pond Gardens Inc | 27 FTE |
| STATE-SIZE | Wen Mar Farms, Inc. | 27 FTE |
| STATE-SIZE | Trillium Farms Croton Pullet 2 | 27 FTE |
| CITY-NEAR | Steris HQ | 835 FTE |
| CITY-NEAR | STERIS | 612 FTE |
| CITY-NEAR | Avery Dennison - Materials Group Building 22 | 612 FTE |
| CITY-NEAR | The Lincoln Electric Company - Mentor | 514 FTE |
| NAT-TCR | Ksc2 - Stadium District-Kino Sports Complex | 6.3 TCR |
| NAT-TCR | Rutland Hauling | 6.3 TCR |
| NAT-TCR | Separators (loc code: SEPARA) | 6.3 TCR |
| NAT-TCR | Waunakee Remodeling | 6.3 TCR |
| NAT-SIZE | Morgan's Welding LLC | 27 FTE |
| NAT-SIZE | Towson Town Center | 27 FTE |
| NAT-SIZE | Stephen F Peters Inc | 27 FTE |
| NAT-SIZE | LATICRETE International, Inc | 27 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.