Jigs (e.g., checking, gauging, inspection) manufacturing · South Carolina

Precision Jig and Fixture South

Duncan, SC · ~16 workers · 7 years of OSHA Injury Tracking Application data.

B
Good Safety Record
2.0
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Precision Jig and Fixture South runs at 60% of its industry's injury rate - safer than the typical Jigs (e.g., checking, gauging, inspection) manufacturing workplace, earning a grade B.

Precision Jig and Fixture South: 2.0 TCR = 60% of Jigs (e.g., checking, gauging, inspection) manufacturing BLS 3.3 · 7y Form 300A (see methodology below)

Precision Jig and Fixture South safety composite

Precision Jig and Fixture South scores strongest on dart rate (safer than 74% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

68/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 1.99 per 100 workers

Safer than 73% of industry peers

DART rate
C 0 per 100 workers

Safer than 74% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Precision Jig and Fixture South held a steady TCR band

Precision Jig and Fixture South's TCR held near 0.0 from 0.0 in 2018 to 0.0 in 2024. Peak filing year was 2023 at 14.0 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).

2018=0.0 · 2019=0.0 · 2020=0.0 · 2021=0.0 · 2022=0.0 · 2023=14.0 · 2024=0.0

OSHA ITA Form 300A scorecard

Establishment book 333514 · Duncan, SC AT/BELOW-IND · SMALL

Grade B · TCR 2.0 · 60% of ind

  • DART 0.0 DART
  • RANK P73
  • PHOTO Eagle Engineering Inc
  • BOOK 7y book
  • INJ 1 inj
  • SIZE ~16 FTE

Nearest TCR peer: Eagle Engineering Inc (0.0 TCR gap)

Read with this employer → · Industry book → · South Carolina employers → · Look up another →

Precision Jig and Fixture South in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Precision Jig and Fixture South averages 2.0 TCR (60% of the Jigs (e.g., checking, gauging, inspection) manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Precision Jig and Fixture South TCR series: 2018=0 · 2019=0 · 2020=0 · 2021=0 · 2022=0 · 2023=14 · 2024=0 · BLS 3.3

Where Precision Jig and Fixture South falls in its industry

387 Jigs (e.g., checking, gauging, establishments

Safer than 73% of graded establishments in this industry, whose median TCR is 3.4.

More dangerous than peersSafer than peers
Precision Jig and Fixture South (16 employees, TCR 2.0) among 29 same-industry peers, split at the industry median of 56 employees and a TCR of 3.4 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0200400600 051015 Average employees Total Case Rate Precision Jig and Fixture South
Precision Jig and Fixture South (16 employees, TCR 2.0) among 29 same-industry peers, split at the industry median of 56 employees and a TCR of 3.4

Precision Jig and Fixture South has fewer employees than the Jigs (e.g., checking, gauging, inspectio median and a lower injury rate than the industry's median TCR of 3.4. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 0.0 0.0 0 0 0
2023 14.0 0.0 1 0 0
2022 0.0 0.0 0 0 0
2021 0.0 0.0 0 0 0
2020 0.0 0.0 0 0 0
2019 0.0 0.0 0 0 0
2018 0.0 0.0 0 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

333514 · SC · Duncan

387 Jigs (e.g., checking, gauging, inspection) manufacturing employers nationwide with a credible TCR · 7,610 rated employers in South Carolina with headcount on file · 104 employers in Duncan, SC · 4 cross-state NAT-TCR peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Eagle Engineering Inc 2.0 TCR
NAICS-TCR Modesto, California Container Graphics Corporation 2.0 TCR
NAICS-TCR Tri C Company 2.0 TCR
NAICS-TCR 3430 Hwy. 70 West , Camden TN. 38320 2.0 TCR
STATE-SIZE S2 Farms, LLC 16 FTE
STATE-SIZE Rickenbaker Gin Inc 16 FTE
STATE-SIZE York Operations Center 16 FTE
STATE-SIZE Pickens SC 16 FTE
CITY-NEAR Draexlmaier Automotive 981 FTE
CITY-NEAR Lear Corporation - Duncan 550 FTE
CITY-NEAR Fehrer Automotive SC, LLC 521 FTE
CITY-NEAR Roechling Automotive / Duncan 393 FTE
NAT-TCR Schu-Tran LLC 2.0 TCR
NAT-TCR 88-11 165th Street 2.0 TCR
NAT-TCR Gateway Services, Inc 2.0 TCR
NAT-TCR Sodexo at Everglades College DBA Keiser 2.0 TCR

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.