Machine shops · Wisconsin
R&D Engineering and Machining
Deforest, WI · ~22 workers · 8 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.2
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
R&D Engineering and Machining runs at 126% of its industry's injury rate - more dangerous than the typical Machine shops workplace, earning a grade D.
R&D Engineering and Machining: 4.2 TCR = 126% of Machine shops BLS 3.3 · 8y Form 300A (see methodology below)
R&D Engineering and Machining safety composite
R&D Engineering and Machining scores strongest on dart rate (safer than 75% of same-industry peers) and weakest on total case rate (tcr) (safer than 42%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
56/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 4.15 per 100 workers
Safer than 42% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 75% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
R&D Engineering and Machining held a steady TCR band
R&D Engineering and Machining's TCR held near 0.0 from 0.0 in 2016 to 0.0 in 2024. Peak filing year was 2022 at 14.3 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
2016=0.0 · 2017=5.3 · 2018=0.0 · 2019=5.8 · 2020=7.8 · 2021=0.0 · 2022=14.3 · 2024=0.0
OSHA ITA Form 300A scorecard
Establishment book 332710 · Deforest, WI ABOVE-IND · SMALL
Grade D · TCR 4.2 · 126% of ind
- DART 0.0 DART
- RANK #67/146
- PHOTO Range Line Road
- BOOK 8y book
- INJ 5 inj
- SIZE ~22 FTE
Nearest TCR peer: Range Line Road (0.0 TCR gap)
Read with this employer → · Industry book → · Wisconsin employers → · Look up another →
R&D Engineering and Machining in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
R&D Engineering and Machining
4.2 TCR
- Range Line Roa
Range Line Road
4.2 TCR
- KENLEE PRECISI
KENLEE PRECISION CORPORATION
4.1 TCR
- Machinists, In
Machinists, Inc.
4.1 TCR
- Huth Ben Pears
Huth Ben Pearson
4.1 TCR
What this shows R&D Engineering and Machining averages 4.2 TCR (126% of the Machine shops BLS benchmark).
R&D Engineering and Machining TCR series: 2016=0 · 2017=5.3 · 2018=0 · 2019=5.8 · 2020=7.8 · 2021=0 · 2022=14.3 · 2024=0 · BLS 3.3
Where R&D Engineering and Machining falls in its industry
1,821 Machine shops establishmentsSafer than 42% of graded establishments in this industry, whose median TCR is 3.5.
Narrower to Wisconsin alone (the establishments it most directly competes with for workers and contracts): ranked #67 safest of 146 Machine shops employers in Wisconsin.
R&D Engineering and Machining has fewer employees than the Machine shops median and a higher injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 14.3 | 0.0 | 2 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 7.8 | 7.8 | 1 | 0 | 0 |
| 2019 | 5.8 | 0.0 | 1 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 5.3 | 5.3 | 1 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332710 · WI · Deforest
1,821 Machine shops employers nationwide with a credible TCR · 12,834 rated employers in Wisconsin with headcount on file · 45 employers in Deforest, WI · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Range Line Road | 4.2 TCR |
| NAICS-TCR | KENLEE PRECISION CORPORATION | 4.1 TCR |
| NAICS-TCR | Machinists, Inc. | 4.1 TCR |
| NAICS-TCR | Huth Ben Pearson | 4.1 TCR |
| STATE-SIZE | URUS Production Shawano Stony Hill | 22 FTE |
| STATE-SIZE | Weston | 22 FTE |
| STATE-SIZE | Jackson Electric Cooperative | 22 FTE |
| STATE-SIZE | Menomonie Service Center | 22 FTE |
| CITY-NEAR | Hooper - WI | 781 FTE |
| CITY-NEAR | ABS Global | 598 FTE |
| CITY-NEAR | ABS Global - Deforest | 561 FTE |
| CITY-NEAR | American Girl Deforest | 213 FTE |
| NAT-TCR | Dejana Truck and Utility Equipment - Queensbury | 4.2 TCR |
| NAT-TCR | Store 049 | 4.2 TCR |
| NAT-TCR | 2826 Far103 | 4.2 TCR |
| NAT-TCR | NFI Interactive Logistics LLC-200 US HWY RTE 1 9 South | 4.2 TCR |
| NAT-SIZE | Hubbell Construction Services | 22 FTE |
| NAT-SIZE | Sna Santa Ana John Wayne Airport | 22 FTE |
| NAT-SIZE | Wiens & Company Construction | 22 FTE |
| NAT-SIZE | Daniels Sharpsmart Inc - Cleveland | 22 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.