Nonferrous metals (except aluminum, copper) secondary smelting and refining · Pennsylvania
Reldan Metals
Fairless Hills, PA · ~167 workers · 2 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Reldan Metals runs at 147% of its industry's injury rate - more dangerous than the typical Nonferrous metals (except aluminum, copper) secondary smelting and refining workplace, earning a grade D.
- D
- Poor Safety Record
- 4.8
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 15
- recordable injuries tracked
Grade compares Reldan Metals's OSHA Total Case Rate of 4.8 to the Nonferrous metals (except aluminum, copper) secondary smelting and refining BLS benchmark of 3.3 (147% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Reldan Metals's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Reldan Metals falls in its industry
139 Nonferrous metals (except alum establishmentsSafer than 32% of graded establishments in this industry, whose median TCR is 3.6.
Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #17 safest of 25 Nonferrous metals (except alum employers in Pennsylvania.
Trend analysis for Reldan Metals
Between 2022 and 2023, Reldan Metals's Total Case Rate held roughly steady from 4.8 to 4.9 recordable injuries per 100 full-time workers, a 3% increase across 1 year of OSHA reporting.
The safest year on record was 2022, at a TCR of 4.8, while 2023 saw the highest rate, at 4.9, a spread of 0.2 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Reldan Metals recorded 15 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 15 injuries shown on this page for Reldan Metals are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331492 - Nonferrous metals (except aluminum, copper) secondary smelting and refining.
DART Rate, Transparent Calculation (2023)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
8 DART incidents × 200,000 ÷ 324,217 hours worked = 4.93 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Reldan Metals (this establishment) | 4.85 | OSHA ITA Form 300A, 2-year avg |
| Nonferrous alloys (except aluminum, copper) made in integrated secondary smelting and alloying plants industry avg | 3.30 | BLS IIF, NAICS 331492 |
| Pennsylvania state avg (all industries) | 5.06 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Reldan Metals to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2023: 8 reportable incidents · 8 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 7 reportable incidents · 7 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 4.9 | 4.9 | 8 | 0 | 0 |
| 2022 | 4.8 | 2.7 | 7 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Reldan Metals's reported OSHA injury record versus its Nonferrous metals (except aluminum, copper) secondary smelting and refining peers, not a verdict on whether any single site is safe today.
- At 147% of the Nonferrous metals (except aluminum, copper) secondary smelting and refining benchmark, Reldan Metals reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Nonferrous metals (except aluminum, copper) secondary smelting and refining sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Reldan Metals's safety grade?
How many injuries has Reldan Metals reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Pennsylvania, and by nearby establishments in Fairless Hills - a different peer set than the category browse links below.
Similar TCR (~4.8)
Similar size (~167 workers)
Nearby in Fairless Hills
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.