Moldings, wood and covered wood, manufacturing · California
SPI-Richfield Millwork
Corning, CA · ~196 workers · 2 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.7
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
SPI-Richfield Millwork runs at 173% of its industry's injury rate - more dangerous than the typical Moldings, wood and covered wood, manufacturing workplace, earning a grade D.
- D
- Poor Safety Record
- 5.7
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 18
- recordable injuries tracked
Grade compares SPI-Richfield Millwork's OSHA Total Case Rate to the BLS industry benchmark across 2 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
SPI-Richfield Millwork's yearly Total Case Rate, against the 3.3 industry benchmark.
Where SPI-Richfield Millwork falls in its industry
337 Moldings, wood and covered woo establishmentsSafer than 39% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #13 safest of 23 Moldings, wood and covered woo employers in California.
SPI-Richfield Millwork has an average TCR of 5.7, which is 173% of the industry average (3.3) for Moldings, wood and covered wood, manufacturing. This is worse than average.
The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.
Trend analysis for SPI-Richfield Millwork
Between 2023 and 2024, SPI-Richfield Millwork's Total Case Rate improved from 8.0 to 3.4 recordable injuries per 100 full-time workers, a 58% decrease across 1 year of OSHA reporting.
The safest year on record was 2024, at a TCR of 3.4, while 2023 saw the highest rate, at 8.0, a spread of 4.6 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 2 reporting years, SPI-Richfield Millwork recorded 18 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from SPI-Richfield Millwork's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 321918 - Moldings, wood and covered wood, manufacturing.
DART Rate, Transparent Calculation (2024)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
5 DART incidents × 200,000 ÷ 412,082 hours worked = 2.43 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| SPI-Richfield Millwork (this establishment) | 5.71 | OSHA ITA Form 300A, 2-year avg |
| Stairwork (e.g., newel posts, railings, staircases, stairs), wood, manufacturing industry avg | 3.30 | BLS IIF, NAICS 321918 |
| California state avg (all industries) | 5.64 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by SPI-Richfield Millwork to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 7 reportable incidents · 7 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 16 reportable incidents · 11 injuries, 5 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.4 | 2.4 | 7 | 0 | 0 |
| 2023 | 8.0 | 4.5 | 11 | 5 | 0 |
What this grade means for you
Use this grade as a relative read on SPI-Richfield Millwork's reported OSHA injury record versus its Moldings, wood and covered wood, manufacturing peers, not a verdict on whether any single site is safe today.
- At 173% of the Moldings, wood and covered wood, manufacturing benchmark, SPI-Richfield Millwork reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Moldings, wood and covered wood, manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is SPI-Richfield Millwork's safety grade?
How many injuries has SPI-Richfield Millwork reported?
Similar Employers
Matched by safety record across the industry and by workforce size within California - a different peer set than the category browse links below.
Similar TCR (~5.7)
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.
Related
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.