STEVE GAMBILL - SHORE/FORM SYSTEMS, INC.
Open-data reference.
PALMETTO, FL | MACHINERY DEALER NOC STORE OR YARD
~35 avg employees | 5 years of OSHA data
STEVE GAMBILL - SHORE/FORM SYSTEMS, INC. has an average TCR of 11.9, which is 543% of the industry average (2.2) for MACHINERY DEALER NOC STORE OR YARD. This is significantly worse than average.
Safety Insights for STEVE GAMBILL - SHORE/FORM SYSTEMS, INC.
STEVE GAMBILL - SHORE/FORM SYSTEMS, INC. operates an establishment with approximately 35 full-time equivalent workers in PALMETTO, FL, classified under the MACHINERY DEALER NOC STORE OR YARD industry (NAICS 423830). Across 5 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 22 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 11.9 injuries per 100 full-time workers per year provides the anchor metric for the F letter grade (Failing Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 2.2 for MACHINERY DEALER NOC STORE OR YARD, STEVE GAMBILL - SHORE/FORM SYSTEMS, INC.'s workforce experiences 543% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked — a 200,000-hour exposure base equals roughly 100 full-time workers — so establishments with very different headcounts can be compared directly. A TCR above the benchmark flags a higher-than-typical risk profile for jobseekers, insurers, and enforcement agencies to examine.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 5 reporting cycles points to systemic hazard exposure. Readers evaluating STEVE GAMBILL - SHORE/FORM SYSTEMS, INC. as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries — there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from STEVE GAMBILL - SHORE/FORM SYSTEMS, INC.'s own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source — name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor — OSHA Establishment-Specific Injury and Illness Data. NAICS 423830 — MACHINERY DEALER NOC STORE OR YARD.
DART Rate — Transparent Calculation (2020)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
4 DART incidents × 200,000 ÷ 73,535 hours worked = 10.88 DART
Methodology: 29 CFR 1904 — OSHA Form 300A recordkeeping
Cross-Validating Context — Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| STEVE GAMBILL - SHORE/FORM SYSTEMS, INC. (this establishment) | 11.94 | OSHA ITA Form 300A, 5-year avg |
| Industrial machinery and equipment (except electrical) merchant wholesalers industry avg | 2.20 | BLS IIF, NAICS 423830 |
| Florida state avg (all industries) | 9.41 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics — Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by STEVE GAMBILL - SHORE/FORM SYSTEMS, INC. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2020: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2019: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2018: 5 reportable incidents · 5 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2017: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2016: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) — inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 13.6 | 10.9 | 5 | 0 | 0 |
| 2019 | 16.1 | 16.1 | 6 | 0 | 0 |
| 2018 | 12.6 | 5.0 | 5 | 0 | 0 |
| 2017 | 8.2 | 8.2 | 3 | 0 | 0 |
| 2016 | 9.1 | 9.1 | 3 | 0 | 0 |
Frequently Asked Questions
What is STEVE GAMBILL - SHORE/FORM SYSTEMS, INC.'s safety grade?
How is the safety grade calculated?
How many injuries has STEVE GAMBILL - SHORE/FORM SYSTEMS, INC. reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology — how this data is sourced, computed, and verified.