Cut Stone and Stone Product Manufacturing · New Jersey
Stone Systems of New Jersey
Passaic, NJ · ~31 workers · 9 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.6
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Stone Systems of New Jersey runs at 170% of its industry's injury rate - more dangerous than the typical Cut Stone and Stone Product Manufacturing workplace, earning a grade D.
Stone Systems of New Jersey: 5.6 TCR = 170% of Cut Stone and Stone Product Manufacturing BLS 3.3 · 9y Form 300A (see methodology below)
Stone Systems of New Jersey safety composite
Stone Systems of New Jersey scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on dart rate (safer than 3%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
32/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 5.6 per 100 workers
Safer than 46% of industry peers
- DART rate
- F 15.69 per 100 workers
Safer than 3% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Stone Systems of New Jersey: 0.0 → 15.7 TCR
Peak year 2024 @ 15.7 TCR · DART/TCR 2.8× in 2024
Stone Systems of New Jersey's TCR rose 15.7 from 0.0 in 2016 to 15.7 in 2024. In 2024, DART was 2.8× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 327991 · Passaic, NJ ABOVE-IND · SMALL
Grade D · TCR 5.6 · 170% of ind
- DART 15.7 DART
- RANK #3/5
- PHOTO Cambria FabShop Clev…
- BOOK 9y book
- INJ 17 inj
- SIZE ~31 FTE
Nearest TCR peer: Cambria FabShop Cleveland LLC (0.0 TCR gap)
Read with this employer → · Industry book → · New Jersey employers → · Look up another →
Stone Systems of New Jersey in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Stone Systems of New Jersey
5.6 TCR
- Cambria FabSho
Cambria FabShop Cleveland LLC
5.6 TCR
- Sales and Dist
Sales and Distribution Center Seattle
5.6 TCR
- Indiana Limest
Indiana Limestone Fabricators
5.6 TCR
- Fox Marble, In
Fox Marble, Inc.
5.6 TCR
What this shows Stone Systems of New Jersey averages 5.6 TCR (170% of the Cut Stone and Stone Product Manufacturing BLS benchmark).
Stone Systems of New Jersey TCR series: 2016=0 · 2017=3.1 · 2018=0 · 2019=3 · 2020=8.8 · 2021=12.8 · 2022=4.4 · 2023=2.5 · 2024=15.7 · BLS 3.3
Where Stone Systems of New Jersey falls in its industry
313 Cut Stone and Stone Product Ma establishmentsSafer than 46% of graded establishments in this industry, whose median TCR is 5.3.
Narrower to New Jersey alone (the establishments it most directly competes with for workers and contracts): ranked #3 safest of 5 Cut Stone and Stone Product Ma employers in New Jersey.
Stone Systems of New Jersey has fewer employees than the Cut Stone and Stone Product Manufacturin median and a higher injury rate than the industry's median TCR of 5.3. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 15.7 | 15.7 | 4 | 0 | 0 |
| 2023 | 2.5 | 2.5 | 1 | 0 | 0 |
| 2022 | 4.4 | 2.2 | 2 | 0 | 0 |
| 2021 | 12.8 | 10.2 | 5 | 0 | 0 |
| 2020 | 8.8 | 8.8 | 3 | 0 | 0 |
| 2019 | 3.0 | 3.0 | 1 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 3.1 | 0.0 | 1 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
327991 · NJ · Passaic
313 Cut Stone and Stone Product Manufacturing employers nationwide with a credible TCR · 11,201 rated employers in New Jersey with headcount on file · 19 employers in Passaic, NJ · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Cambria FabShop Cleveland LLC | 5.6 TCR |
| NAICS-TCR | Sales and Distribution Center Seattle | 5.6 TCR |
| NAICS-TCR | Indiana Limestone Fabricators | 5.6 TCR |
| NAICS-TCR | Fox Marble, Inc. | 5.6 TCR |
| STATE-SIZE | Orsted - Newark | 31 FTE |
| STATE-SIZE | Beacon Construction Services | 31 FTE |
| STATE-SIZE | Neelam Construction Corp | 31 FTE |
| STATE-SIZE | Spiniello Companies - Livingston | 31 FTE |
| CITY-NEAR | St. Mary's General Hospital | 959 FTE |
| CITY-NEAR | Grocery Stores | 388 FTE |
| CITY-NEAR | Shop Rite | 255 FTE |
| CITY-NEAR | Complete Care at Chestnut Hill | 169 FTE |
| NAT-TCR | Dexter Fastener Technologies, Inc. | 5.6 TCR |
| NAT-TCR | 215BIN | 5.6 TCR |
| NAT-TCR | Rosenbauer Aerials LLC | 5.6 TCR |
| NAT-TCR | CAN030 | 5.6 TCR |
| NAT-SIZE | Plant NG | 31 FTE |
| NAT-SIZE | Muskegon Sales Branch | 31 FTE |
| NAT-SIZE | Sodexo at Toyota Motor Ms Food | 31 FTE |
| NAT-SIZE | The Commonwealth | 31 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.