Building materials supply dealers · Utah
Sunpro Corporation
Lindon, UT · ~507 workers · 2 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.6
- Avg TCR
- 3.4
- Industry avg
- 0
- Fatalities
The verdict
Sunpro Corporation runs at 136% of its industry's injury rate - more dangerous than the typical Building materials supply dealers workplace, earning a grade D.
- D
- Poor Safety Record
- 4.6
- avg TCR · per 100 workers
- 3.4
- industry benchmark (BLS)
- 32
- recordable injuries tracked
Grade compares Sunpro Corporation's OSHA Total Case Rate of 4.6 to the Building materials supply dealers BLS benchmark of 3.4 (136% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Sunpro Corporation's yearly Total Case Rate, against the 3.4 industry benchmark.
Where Sunpro Corporation falls in its industry
1,776 Building materials supply deal establishmentsSafer than 52% of graded establishments in this industry, whose median TCR is 4.8.
Narrower to Utah alone (the establishments it most directly competes with for workers and contracts): ranked #14 safest of 23 Building materials supply deal employers in Utah.
Trend analysis for Sunpro Corporation
Between 2019 and 2020, Sunpro Corporation's Total Case Rate improved from 4.8 to 4.5 recordable injuries per 100 full-time workers, a 6% decrease across 1 year of OSHA reporting.
The safest year on record was 2020, at a TCR of 4.5, while 2019 saw the highest rate, at 4.8, a spread of 0.3 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Sunpro Corporation recorded 32 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 32 injuries, 3 illnesses shown on this page for Sunpro Corporation are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 444190 - Building materials supply dealers.
DART Rate, Transparent Calculation (2020)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
4 DART incidents × 200,000 ÷ 802,675 hours worked = 1.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Sunpro Corporation (this establishment) | 4.63 | OSHA ITA Form 300A, 2-year avg |
| Building materials supply dealers industry avg | 3.40 | BLS IIF, NAICS 444190 |
| Utah state avg (all industries) | 4.77 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Sunpro Corporation to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2020: 18 reportable incidents · 15 injuries, 3 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 17 reportable incidents · 17 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2020 | 4.5 | 1.0 | 15 | 3 | 0 |
| 2019 | 4.8 | 4.2 | 17 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Sunpro Corporation's reported OSHA injury record versus its Building materials supply dealers peers, not a verdict on whether any single site is safe today.
- At 136% of the Building materials supply dealers benchmark, Sunpro Corporation reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Building materials supply dealers sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Sunpro Corporation's safety grade?
How many injuries has Sunpro Corporation reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Utah, and by nearby establishments in Lindon - a different peer set than the category browse links below.
Similar TCR (~4.6)
Similar size (~507 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.