Die-casting dies manufacturing · North Carolina

Symmetrix Composite Tooling

Statesville, NC · ~30 workers · 5 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
10.8
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Symmetrix Composite Tooling runs at 329% of its industry's injury rate - far more dangerous than the typical Die-casting dies manufacturing workplace, earning a grade F.

Symmetrix Composite Tooling: 10.8 TCR = 329% of Die-casting dies manufacturing BLS 3.3 · 5y Form 300A (see methodology below)

Symmetrix Composite Tooling safety composite

Symmetrix Composite Tooling scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on dart rate (safer than 5%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

F

18/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
F 10.85 per 100 workers

Safer than 10% of industry peers

DART rate
F 11.12 per 100 workers

Safer than 5% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−3.0

2020→2024

Symmetrix Composite Tooling injury rate improved

Symmetrix Composite Tooling's TCR fell 3.0 from 14.1 in 2020 to 11.1 in 2024. Peak filing year was 2022 at 19.2 TCR. In 2024, DART was 1.02× this establishment's average TCR (severity share of cases).

2020=14.1 · 2021=3.9 · 2022=19.2 · 2023=5.8 · 2024=11.1

OSHA ITA Form 300A scorecard

Establishment book 333511 · Statesville, NC ABOVE-IND · SMALL

Grade F · TCR 10.8 · 329% of ind

  • DART 11.1 DART
  • RANK #7/7
  • PHOTO Custom Roto-Mold, LLC
  • BOOK 5y book
  • INJ 14 inj
  • SIZE ~30 FTE

Nearest TCR peer: Custom Roto-Mold, LLC (0.1 TCR gap)

Read with this employer → · Industry book → · North Carolina employers → · Look up another →

Symmetrix Composite Tooling in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Symmetrix Composite Tooling averages 10.8 TCR (329% of the Die-casting dies manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Symmetrix Composite Tooling TCR series: 2020=14.1 · 2021=3.9 · 2022=19.2 · 2023=5.8 · 2024=11.1 · BLS 3.3

Where Symmetrix Composite Tooling falls in its industry

216 Die-casting dies manufacturing establishments

Safer than 10% of graded establishments in this industry, whose median TCR is 3.7.

More dangerous than peersSafer than peers

Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 7 Die-casting dies manufacturing employers in North Carolina.

Symmetrix Composite Tooling (30 employees, TCR 10.8) among 29 same-industry peers, split at the industry median of 53 employees and a TCR of 3.7 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 050100150200 05101520 Average employees Total Case Rate Symmetrix Composite Tooling
Symmetrix Composite Tooling (30 employees, TCR 10.8) among 29 same-industry peers, split at the industry median of 53 employees and a TCR of 3.7

Symmetrix Composite Tooling has fewer employees than the Die-casting dies manufacturing median and a higher injury rate than the industry's median TCR of 3.7. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 11.1 11.1 3 1 0
2023 5.8 5.8 2 0 0
2022 19.2 16.0 6 0 0
2021 3.9 0.0 1 0 0
2020 14.1 14.1 2 1 0

OSHA ITA peer cross-reference

Establishment peer ledger

333511 · NC · Statesville

216 Die-casting dies manufacturing employers nationwide with a credible TCR · 16,981 rated employers in North Carolina with headcount on file · 181 employers in Statesville, NC · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Custom Roto-Mold, LLC 10.9 TCR
NAICS-TCR Custom Tool & Design 10.6 TCR
NAICS-TCR AFK Corp 11.2 TCR
NAICS-TCR Kobra Molds LLC 11.2 TCR
STATE-SIZE Shugart Farm 30 FTE
STATE-SIZE Hays Hatchery 30 FTE
STATE-SIZE Hight Family Farms LLC 30 FTE
STATE-SIZE High Point Operations Center 30 FTE
CITY-NEAR 2807-0960 974 FTE
CITY-NEAR Doosan Bobcat 857 FTE
CITY-NEAR 0960 LOWE S NORTH CAROLINA RDC 836 FTE
CITY-NEAR Cheney Brothers Inc. - Statesville 830 FTE
NAT-TCR Sixt Rent A Car - Phoenix Sky Harbor International Airport 9 10.8 TCR
NAT-TCR IAS Masonville 10.8 TCR
NAT-TCR MNM002 10.8 TCR
NAT-TCR J&M Displays, Inc. 10.8 TCR
NAT-SIZE Mohr Stamping Inc. 30 FTE
NAT-SIZE Nms Pbu Boc Fds 30 FTE
NAT-SIZE Hero Logistics - LCD 30 FTE
NAT-SIZE Overhead Door Company of Washington, DC Northern VA 30 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.