Anodizing metals and metal products for the trade · New York
Tech Fibers, Inc. (Electro Fiber Technologies)
Schenectady, NY · ~21 workers · 3 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 1.7
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Tech Fibers, Inc. (Electro Fiber Technologies) runs at 52% of its industry's injury rate - safer than the typical Anodizing metals and metal products for the trade workplace, earning a grade B.
- B
- Good Safety Record
- 1.7
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 1
- recordable injuries tracked
Grade compares Tech Fibers, Inc. (Electro Fiber Technologies)'s OSHA Total Case Rate of 1.7 to the Anodizing metals and metal products for the trade BLS benchmark of 3.3 (52% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Tech Fibers, Inc. (Electro Fiber Technologies)'s yearly Total Case Rate, against the 3.3 industry benchmark.
Where Tech Fibers, Inc. (Electro Fiber Technologies) falls in its industry
643 Anodizing metals and metal pro establishmentsSafer than 73% of graded establishments in this industry, whose median TCR is 3.7.
Narrower to New York alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 18 Anodizing metals and metal pro employers in New York.
Trend analysis for Tech Fibers, Inc. (Electro Fiber Technologies)
Between 2017 and 2019, Tech Fibers, Inc. (Electro Fiber Technologies)'s Total Case Rate held roughly steady from 0.0 to 5.2 recordable injuries per 100 full-time workers, a 0% change across 2 years of OSHA reporting.
The safest year on record was 2017, at a TCR of 0.0, while 2019 saw the highest rate, at 5.2, a spread of 5.2 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, Tech Fibers, Inc. (Electro Fiber Technologies) recorded 1 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 1 injuries shown on this page for Tech Fibers, Inc. (Electro Fiber Technologies) are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332813 - Anodizing metals and metal products for the trade.
DART Rate, Transparent Calculation (2019)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
0 DART incidents × 200,000 ÷ 38,820 hours worked = 0.00 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Tech Fibers, Inc. (Electro Fiber Technologies) (this establishment) | 1.72 | OSHA ITA Form 300A, 3-year avg |
| Electroplating metals and formed products for the trade industry avg | 3.30 | BLS IIF, NAICS 332813 |
| New York state avg (all industries) | 4.67 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Tech Fibers, Inc. (Electro Fiber Technologies) to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2019: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2019 | 5.2 | 0.0 | 1 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Tech Fibers, Inc. (Electro Fiber Technologies)'s reported OSHA injury record, strong versus its Anodizing metals and metal products for the trade peers, but not a guarantee about any single site today.
- At 52% of the Anodizing metals and metal products for the trade benchmark, Tech Fibers, Inc. (Electro Fiber Technologies) reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Anodizing metals and metal products for the trade sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Tech Fibers, Inc. (Electro Fiber Technologies)'s safety grade?
How many injuries has Tech Fibers, Inc. (Electro Fiber Technologies) reported?
Similar Employers
Matched by safety record across the industry, by workforce size within New York, and by nearby establishments in Schenectady - a different peer set than the category browse links below.
Similar TCR (~1.7)
Similar size (~21 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.