Bends, pipe, made from purchased metal pipe · Alabama
Tru-Line Manufacturing, Inc.
Decatur, AL · ~61 workers · 9 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 2.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Tru-Line Manufacturing, Inc. runs at 85% of its industry's injury rate - about level with the typical Bends, pipe, made from purchased metal pipe workplace, earning a grade C.
Tru-Line Manufacturing, Inc.: 2.8 TCR = 85% of Bends, pipe, made from purchased metal pipe BLS 3.3 · 9y Form 300A (see methodology below)
Tru-Line Manufacturing, Inc. safety composite
Tru-Line Manufacturing, Inc. scores strongest on total case rate (tcr) (safer than 57% of same-industry peers) and weakest on dart rate (safer than 38%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
49/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 2.8 per 100 workers
Safer than 57% of industry peers
- DART rate
- D 2.12 per 100 workers
Safer than 38% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−2.0
2016→2024
Tru-Line Manufacturing, Inc. injury rate improved
Tru-Line Manufacturing, Inc.'s TCR fell 2.0 from 4.1 in 2016 to 2.1 in 2024. Peak filing year was 2017 at 5.3 TCR. In 2024, DART was 0.76× this establishment's average TCR (severity share of cases).
2016=4.1 · 2017=5.3 · 2018=3.0 · 2019=1.4 · 2020=1.8 · 2021=3.0 · 2022=2.7 · 2023=1.6 · 2024=2.1
OSHA ITA Form 300A scorecard
Establishment book 332996 · Decatur, AL AT/BELOW-IND · SMALL
Grade C · TCR 2.8 · 85% of ind
- DART 2.1 DART
- RANK #6/10
- PHOTO Broad St.
- BOOK 9y book
- INJ 16 inj
- SIZE ~61 FTE
Nearest TCR peer: Broad St. (0.0 TCR gap)
Read with this employer → · Industry book → · Alabama employers → · Look up another →
Tru-Line Manufacturing, Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Tru-Line Manufacturing, Inc.
2.8 TCR
- Broad St.
Broad St.
2.8 TCR
- Ore City finis
Ore City finishing plant
2.8 TCR
- American Tubin
American Tubing International
2.8 TCR
- ALLOY PIPING P
ALLOY PIPING PRODUCTS - 642 APP JACK WELLS
2.8 TCR
What this shows Tru-Line Manufacturing, Inc. averages 2.8 TCR (85% of the Bends, pipe, made from purchased metal pipe BLS benchmark).
Tru-Line Manufacturing, Inc. TCR series: 2016=4.1 · 2017=5.3 · 2018=3 · 2019=1.4 · 2020=1.8 · 2021=3 · 2022=2.7 · 2023=1.6 · 2024=2.1 · BLS 3.3
Where Tru-Line Manufacturing, Inc. falls in its industry
337 Bends, pipe, made from purchas establishmentsSafer than 57% of graded establishments in this industry, whose median TCR is 3.3.
Narrower to Alabama alone (the establishments it most directly competes with for workers and contracts): ranked #6 safest of 10 Bends, pipe, made from purchas employers in Alabama.
Tru-Line Manufacturing, Inc. has fewer employees than the Bends, pipe, made from purchased metal p median and a lower injury rate than the industry's median TCR of 3.3. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 2.1 | 2.1 | 1 | 0 | 0 |
| 2023 | 1.6 | 1.6 | 1 | 0 | 0 |
| 2022 | 2.7 | 2.7 | 2 | 0 | 0 |
| 2021 | 3.0 | 2.4 | 4 | 1 | 0 |
| 2020 | 1.8 | 1.8 | 1 | 0 | 0 |
| 2019 | 1.4 | 1.4 | 1 | 0 | 0 |
| 2018 | 3.0 | 3.0 | 2 | 0 | 0 |
| 2017 | 5.3 | 5.3 | 3 | 0 | 0 |
| 2016 | 4.1 | 2.1 | 1 | 1 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332996 · AL · Decatur
337 Bends, pipe, made from purchased metal pipe employers nationwide with a credible TCR · 7,418 rated employers in Alabama with headcount on file · 239 employers in Decatur, AL · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Broad St. | 2.8 TCR |
| NAICS-TCR | Ore City finishing plant | 2.8 TCR |
| NAICS-TCR | American Tubing International | 2.8 TCR |
| NAICS-TCR | ALLOY PIPING PRODUCTS - 642 APP JACK WELLS | 2.8 TCR |
| STATE-SIZE | Koch Foods Crossville Hatchery | 61 FTE |
| STATE-SIZE | Capstone Building Corp. Office | 61 FTE |
| STATE-SIZE | Legacy Equipment | 61 FTE |
| STATE-SIZE | Barlovento, LLC | 61 FTE |
| CITY-NEAR | Supply Chain - Decatur | 1,450 FTE |
| CITY-NEAR | Decatur processing plant | 885 FTE |
| CITY-NEAR | ULA-Decatur | 701 FTE |
| CITY-NEAR | Decatur Fresh Plant | 671 FTE |
| NAT-TCR | Sunset | 2.8 TCR |
| NAT-TCR | NCK | 2.8 TCR |
| NAT-TCR | W. C. English, Incorporated | 2.8 TCR |
| NAT-TCR | Filice Farms, L.P. | 2.8 TCR |
| NAT-SIZE | Harbor Valley Health and Rehabilitation | 61 FTE |
| NAT-SIZE | Dallas Waste Disposal & Recycling Inc | 61 FTE |
| NAT-SIZE | Chicago Greyhound | 61 FTE |
| NAT-SIZE | Jumbo II LLC | 61 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.