Animal feed mills (except dog and cat) manufacturing · Pennsylvania
Wenger Feeds - Hempfield Mill
Lancaster, PA · ~34 workers · 9 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.9
- Avg TCR
- 3.9
- Industry avg
- 0
- Fatalities
The verdict
Wenger Feeds - Hempfield Mill runs at 100% of its industry's injury rate - about level with the typical Animal feed mills (except dog and cat) manufacturing workplace, earning a grade C.
- C
- Average Safety Record
- 3.9
- avg TCR · per 100 workers
- 3.9
- industry benchmark (BLS)
- 10
- recordable injuries tracked
Grade compares Wenger Feeds - Hempfield Mill's OSHA Total Case Rate to the BLS industry benchmark across 9 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
Wenger Feeds - Hempfield Mill's yearly Total Case Rate, against the 3.9 industry benchmark.
Where Wenger Feeds - Hempfield Mill falls in its industry
832 Animal feed mills (except dog establishmentsSafer than 40% of graded establishments in this industry, whose median TCR is 3.2.
Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #24 safest of 48 Animal feed mills (except dog employers in Pennsylvania.
Wenger Feeds - Hempfield Mill has an average TCR of 3.9, which is 100% of the industry average (3.9) for Animal feed mills (except dog and cat) manufacturing. This is better than average.
The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.
Trend analysis for Wenger Feeds - Hempfield Mill
Between 2016 and 2024, Wenger Feeds - Hempfield Mill's Total Case Rate improved from 11.8 to 2.0 recordable injuries per 100 full-time workers, a 83% decrease across 8 years of OSHA reporting.
The safest year on record was 2020, at a TCR of 0.0, while 2016 saw the highest rate, at 11.8, a spread of 11.8 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 9 reporting years, Wenger Feeds - Hempfield Mill recorded 10 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 9-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from Wenger Feeds - Hempfield Mill's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 311119 - Animal feed mills (except dog and cat) manufacturing.
DART Rate, Transparent Calculation (2024)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 98,311 hours worked = 2.03 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Wenger Feeds - Hempfield Mill (this establishment) | 3.90 | OSHA ITA Form 300A, 9-year avg |
| Grain Mill Animal Feed industry avg | 3.90 | BLS IIF, NAICS 311119 |
| Pennsylvania state avg (all industries) | 5.06 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Wenger Feeds - Hempfield Mill to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2018: 2 reportable incidents · 1 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 4 reportable incidents · 2 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 2.0 | 2.0 | 1 | 0 | 0 |
| 2023 | 4.8 | 4.8 | 2 | 0 | 0 |
| 2022 | 2.8 | 0.0 | 1 | 0 | 0 |
| 2021 | 2.8 | 2.8 | 1 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 3.3 | 3.3 | 1 | 0 | 0 |
| 2018 | 6.0 | 0.0 | 1 | 1 | 0 |
| 2017 | 1.5 | 1.5 | 1 | 0 | 0 |
| 2016 | 11.8 | 2.9 | 2 | 2 | 0 |
What this grade means for you
Use this grade as a relative read on Wenger Feeds - Hempfield Mill's reported OSHA injury record, strong versus its Animal feed mills (except dog and cat) manufacturing peers, but not a guarantee about any single site today.
- At 100% of the Animal feed mills (except dog and cat) manufacturing benchmark, Wenger Feeds - Hempfield Mill reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Animal feed mills (except dog and cat) manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Wenger Feeds - Hempfield Mill's safety grade?
How many injuries has Wenger Feeds - Hempfield Mill reported?
Similar Employers
Matched by safety record across the industry and by workforce size within Pennsylvania - a different peer set than the category browse links below.
Similar TCR (~3.9)
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.
Related
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.