Molds for forming materials (e.g., glass, plastics, rubber) manufacturing · Puerto Rico

West Contract Manufacturing

Cidra, PR · ~171 workers · 5 years of OSHA Injury Tracking Application data.

A
Excellent Safety Record
0.9
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

West Contract Manufacturing runs at 27% of its industry's injury rate - far safer than the typical Molds for forming materials (e.g., glass, plastics, rubber) manufacturing workplace, earning a grade A.

A
Excellent Safety Record
0.9
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
3
recordable injuries tracked

Grade compares West Contract Manufacturing's OSHA Total Case Rate to the BLS industry benchmark across 5 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.

Injury rate over time

West Contract Manufacturing's yearly Total Case Rate, against the 3.3 industry benchmark.

-101234 20182019202020212024 2.63.3 Industry benchmarkWest Contract Manufacturing TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 333511.

Where West Contract Manufacturing falls in its industry

239 Molds for forming materials (e establishments

Safer than 88% of graded establishments in this industry, whose median TCR is 3.3.

More dangerous than peersSafer than peers

West Contract Manufacturing has an average TCR of 0.9, which is 27% of the industry average (3.3) for Molds for forming materials (e.g., glass, plastics, rubber) manufacturing. This is significantly better than average.

The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.

Trend analysis for West Contract Manufacturing

Between 2018 and 2024, West Contract Manufacturing's Total Case Rate held roughly steady from 0.0 to 2.6 recordable injuries per 100 full-time workers, a 0% change across 6 years of OSHA reporting.

The safest year on record was 2018, at a TCR of 0.0, while 2024 saw the highest rate, at 2.6, a spread of 2.6 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 5 reporting years, West Contract Manufacturing recorded 3 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 5-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

All injury, illness, and fatality figures on this page are sourced from West Contract Manufacturing's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 333511 - Molds for forming materials (e.g., glass, plastics, rubber) manufacturing.

DART Rate, Transparent Calculation (2024)

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

2 DART incidents × 200,000 ÷ 377,020 hours worked = 1.06 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
West Contract Manufacturing (this establishment) 0.88 OSHA ITA Form 300A, 5-year avg
Industrial molds (except steel ingot) manufacturing industry avg 3.30 BLS IIF, NAICS 333511
Puerto Rico state avg (all industries) 4.48 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by West Contract Manufacturing to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 2.6 1.1 2 3 0
2021 0.6 0.0 0 1 0
2020 0.5 0.0 0 1 0
2019 0.7 0.0 1 0 0
2018 0.0 0.0 0 0 0

What this grade means for you

Use this grade as a relative read on West Contract Manufacturing's reported OSHA injury record, strong versus its Molds for forming materials (e.g., glass, plastics, rubber) manufacturing peers, but not a guarantee about any single site today.

  • At 27% of the Molds for forming materials (e.g., glass, plastics, rubber) manufacturing benchmark, West Contract Manufacturing reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
  • Judge this record against the wider Molds for forming materials (e.g., glass, plastics, rubber) manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is West Contract Manufacturing's safety grade?
West Contract Manufacturing has a safety grade of A (Excellent Safety Record). This grade is based on their average Total Case Rate (TCR) of 0.9 compared to the BLS industry benchmark of 3.3 for Molds for forming materials (e.g., glass, plastics, rubber) manufacturing.
How many injuries has West Contract Manufacturing reported?
West Contract Manufacturing has reported 3 total injuries and 0 fatalities across 5 years of OSHA data (2024, 2021, 2020, 2019, 2018). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry and by workforce size within Puerto Rico - a different peer set than the category browse links below.

Similar TCR (~0.9)

Similar size (~171 workers)

Explore More Safety Data

→ More employers in Puerto Rico → Industry: Molds for forming materials (e.g., glass, plastics, rubber) manufacturing → Safety grades explained → How to check employer safety → Understanding OSHA rates
Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2021, 2020, 2019, 2018. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Related

All employers → | Rankings →
Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.