Aluminum die-castings, unfinished, manufacturing · Georgia
Whitehead Die Casting, Inc.
Gainesville, GA · ~70 workers · 8 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.2
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Whitehead Die Casting, Inc. runs at 68% of its industry's injury rate - safer than the typical Aluminum die-castings, unfinished, manufacturing workplace, earning a grade B.
Whitehead Die Casting, Inc.: 2.2 TCR = 68% of Aluminum die-castings, unfinished, manufacturing BLS 3.3 · 8y Form 300A (see methodology below)
Whitehead Die Casting, Inc. safety composite
Whitehead Die Casting, Inc. scores strongest on dart rate (safer than 87% of same-industry peers) and weakest on fatalities (safer than 50%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
77/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- B 2.23 per 100 workers
Safer than 86% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 87% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−4.8
2016→2023
Whitehead Die Casting, Inc. injury rate improved
Whitehead Die Casting, Inc.'s TCR fell 4.8 from 4.8 in 2016 to 0.0 in 2023. Peak filing year was 2016 at 4.8 TCR. In 2023, DART was 0× this establishment's average TCR (severity share of cases).
2016=4.8 · 2017=1.2 · 2018=2.8 · 2019=4.4 · 2020=0.0 · 2021=3.1 · 2022=1.6 · 2023=0.0
OSHA ITA Form 300A scorecard
Establishment book 331523 · Gainesville, GA AT/BELOW-IND · SMALL
Grade B · TCR 2.2 · 68% of ind
- DART 0.0 DART
- RANK P86
- PHOTO Cascade Die Casting …
- BOOK 8y book
- INJ 10 inj
- SIZE ~70 FTE
Nearest TCR peer: Cascade Die Casting Group - Mid-State (0.0 TCR gap)
Read with this employer → · Industry book → · Georgia employers → · Look up another →
Whitehead Die Casting, Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- cambridge Pace
cambridge Pace
2.3 TCR
- This site
Whitehead Die Casting, Inc.
2.2 TCR
- Cascade Die Ca
Cascade Die Casting Group - Mid-State
2.2 TCR
- Pace Industrie
Pace Industries
2.2 TCR
- Nemak Plant 2
Nemak Plant 2
2.2 TCR
What this shows Whitehead Die Casting, Inc. averages 2.2 TCR (68% of the Aluminum die-castings, unfinished, manufacturing BLS benchmark).
Whitehead Die Casting, Inc. TCR series: 2016=4.8 · 2017=1.2 · 2018=2.8 · 2019=4.4 · 2020=0 · 2021=3.1 · 2022=1.6 · 2023=0 · BLS 3.3
Where Whitehead Die Casting, Inc. falls in its industry
221 Aluminum die-castings, unfinis establishmentsSafer than 86% of graded establishments in this industry, whose median TCR is 4.7.
Whitehead Die Casting, Inc. has fewer employees than the Aluminum die-castings, unfinished, manuf median and a lower injury rate than the industry's median TCR of 4.7. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 1.6 | 1.6 | 1 | 0 | 0 |
| 2021 | 3.1 | 3.1 | 2 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 4.4 | 2.9 | 3 | 0 | 0 |
| 2018 | 2.8 | 1.4 | 1 | 1 | 0 |
| 2017 | 1.2 | 1.2 | 1 | 0 | 0 |
| 2016 | 4.8 | 0.0 | 2 | 2 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
331523 · GA · Gainesville
221 Aluminum die-castings, unfinished, manufacturing employers nationwide with a credible TCR · 14,941 rated employers in Georgia with headcount on file · 306 employers in Gainesville, GA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Cascade Die Casting Group - Mid-State | 2.2 TCR |
| NAICS-TCR | Pace Industries | 2.2 TCR |
| NAICS-TCR | Nemak Plant 2 | 2.2 TCR |
| NAICS-TCR | cambridge Pace | 2.3 TCR |
| STATE-SIZE | Plains Logging Company | 70 FTE |
| STATE-SIZE | AGLC Gwinnett RBC | 70 FTE |
| STATE-SIZE | GS Construction Inc | 70 FTE |
| STATE-SIZE | Jerry L. Johnson & Associates | 70 FTE |
| CITY-NEAR | Northeast Georgia Medical Center, Inc. | 5,384 FTE |
| CITY-NEAR | Kubota Manufacturing of America Corporation | 1,863 FTE |
| CITY-NEAR | Poultry Processing | 1,546 FTE |
| CITY-NEAR | Mar-Jac Poultry, Inc Processing Plant | 1,190 FTE |
| NAT-TCR | Atlas Companies | 2.2 TCR |
| NAT-TCR | Sacramento Pocket Grocery Outlet | 2.2 TCR |
| NAT-TCR | Bureau of Environmental Health Management (BEHM) | 2.2 TCR |
| NAT-TCR | Furuno USA, Inc. | 2.2 TCR |
| NAT-SIZE | Harris Manufacturing Services, LLC | 70 FTE |
| NAT-SIZE | Vetter Stone Company | 70 FTE |
| NAT-SIZE | Lagorio Brothers, Inc. | 70 FTE |
| NAT-SIZE | Naples Fl | 70 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.