Injection molding machinery for plastics manufacturing · Indiana
Williams Plastics LLC
Shelbyville, IN · ~66 workers · 6 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.6
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Williams Plastics LLC runs at 109% of its industry's injury rate - about level with the typical Injection molding machinery for plastics manufacturing workplace, earning a grade C.
Williams Plastics LLC: 3.6 TCR = 109% of Injection molding machinery for plastics manufacturing BLS 3.3 · 6y Form 300A (see methodology below)
Williams Plastics LLC safety composite
Williams Plastics LLC scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on total case rate (tcr) (safer than 40%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
43/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 3.6 per 100 workers
Safer than 40% of industry peers
- DART rate
- D 1.5 per 100 workers
Safer than 41% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Williams Plastics LLC: 0.0 → 1.5 TCR
Peak year 2021 @ 9.4 TCR · DART/TCR 0.42× in 2023
Williams Plastics LLC's TCR rose 1.5 from 0.0 in 2018 to 1.5 in 2023. Peak filing year was 2021 at 9.4 TCR. In 2023, DART was 0.42× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 333249 · Shelbyville, IN ABOVE-IND · SMALL
Grade C · TCR 3.6 · 109% of ind
- DART 1.5 DART
- RANK #7/14
- PHOTO ENTEK Manufacturing …
- BOOK 6y book
- INJ 10 inj
- SIZE ~66 FTE
Nearest TCR peer: ENTEK Manufacturing LLC - Henderson (0.0 TCR gap)
Read with this employer → · Industry book → · Indiana employers → · Look up another →
Williams Plastics LLC in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Williams Plastics LLC
3.6 TCR
- ENTEK Manufact
ENTEK Manufacturing LLC - Henderson
3.6 TCR
- SW Hyannis
SW Hyannis
3.6 TCR
- H20 Innovation
H20 Innovation USA, Inc. Champlin
3.6 TCR
- Morrison Texti
Morrison Textile Machinery Company
3.6 TCR
What this shows Williams Plastics LLC averages 3.6 TCR (109% of the Injection molding machinery for plastics manufacturing BLS benchmark).
Williams Plastics LLC TCR series: 2018=0 · 2019=2.9 · 2020=3.1 · 2021=9.4 · 2022=4.8 · 2023=1.5 · BLS 3.3
Where Williams Plastics LLC falls in its industry
448 Injection molding machinery fo establishmentsSafer than 40% of graded establishments in this industry, whose median TCR is 3.0.
Narrower to Indiana alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 14 Injection molding machinery fo employers in Indiana.
Williams Plastics LLC has fewer employees than the Injection molding machinery for plastics median and a higher injury rate than the industry's median TCR of 3.0. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 1.5 | 1.5 | 1 | 0 | 0 |
| 2022 | 4.8 | 4.8 | 3 | 0 | 0 |
| 2021 | 9.4 | 9.4 | 5 | 0 | 0 |
| 2020 | 3.1 | 3.1 | 1 | 0 | 0 |
| 2019 | 2.9 | 0.0 | 0 | 1 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
333249 · IN · Shelbyville
448 Injection molding machinery for plastics manufacturing employers nationwide with a credible TCR · 12,750 rated employers in Indiana with headcount on file · 69 employers in Shelbyville, IN · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | ENTEK Manufacturing LLC - Henderson | 3.6 TCR |
| NAICS-TCR | SW Hyannis | 3.6 TCR |
| NAICS-TCR | H20 Innovation USA, Inc. Champlin | 3.6 TCR |
| NAICS-TCR | Morrison Textile Machinery Company | 3.6 TCR |
| STATE-SIZE | Terre Haute Operations Center | 66 FTE |
| STATE-SIZE | AES Indiana (T&D) - Arlington Service Center | 66 FTE |
| STATE-SIZE | 573-NiSource-Angola IN-Operating HQ | 66 FTE |
| STATE-SIZE | Huntington 04 | 66 FTE |
| CITY-NEAR | Indiana Grand | 1,033 FTE |
| CITY-NEAR | HORSESHOE INDIANAPOLIS | 877 FTE |
| CITY-NEAR | Ryobi Die Casting (USA) INC | 779 FTE |
| CITY-NEAR | Penske : 5076-00 Kroger-DCM/Shelbyville, IN | 581 FTE |
| NAT-TCR | MAS Construction Services, Inc. | 3.6 TCR |
| NAT-TCR | Lowrie Place | 3.6 TCR |
| NAT-TCR | Brooklyn Regional Office | 3.6 TCR |
| NAT-TCR | branch 2 | 3.6 TCR |
| NAT-SIZE | Surprise AZ Truss (Peoria) | 66 FTE |
| NAT-SIZE | Omni Aerospace, Inc | 66 FTE |
| NAT-SIZE | CED - Greentech (PC8018) | 66 FTE |
| NAT-SIZE | Allied Steel | 66 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.