Cementing oil and gas well casings on a contract basis · Wyoming
350 Dwyer Drive
Mills, WY · ~50 workers · 3 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 0.3
- Avg TCR
- 1.9
- Industry avg
- 0
- Fatalities
The verdict
350 Dwyer Drive runs at 18% of its industry's injury rate - far safer than the typical Cementing oil and gas well casings on a contract basis workplace, earning a grade A.
- A
- Excellent Safety Record
- 0.3
- avg TCR · per 100 workers
- 1.9
- industry benchmark (BLS)
- 1
- recordable injuries tracked
Grade compares 350 Dwyer Drive's OSHA Total Case Rate of 0.3 to the Cementing oil and gas well casings on a contract basis BLS benchmark of 1.9 (18% of benchmark) across 3 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
350 Dwyer Drive's yearly Total Case Rate, against the 1.9 industry benchmark.
Where 350 Dwyer Drive falls in its industry
653 Cementing oil and gas well cas establishmentsSafer than 62% of graded establishments in this industry, whose median TCR is 0.6.
Narrower to Wyoming alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 19 Cementing oil and gas well cas employers in Wyoming.
Trend analysis for 350 Dwyer Drive
Between 2021 and 2024, 350 Dwyer Drive's Total Case Rate held roughly steady from 0.0 to 1.1 recordable injuries per 100 full-time workers, a 0% change across 3 years of OSHA reporting.
The safest year on record was 2021, at a TCR of 0.0, while 2024 saw the highest rate, at 1.1, a spread of 1.1 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 3 reporting years, 350 Dwyer Drive recorded 1 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 3-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 1 injuries shown on this page for 350 Dwyer Drive are sourced from its own 3 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 213112 - Cementing oil and gas well casings on a contract basis.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 190,175 hours worked = 1.05 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| 350 Dwyer Drive (this establishment) | 0.35 | OSHA ITA Form 300A, 3-year avg |
| Contract services (except site preparation and related construction contractor activities) for oil and gas fields industry avg | 1.90 | BLS IIF, NAICS 213112 |
| Wyoming state avg (all industries) | 4.95 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by 350 Dwyer Drive to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 1.1 | 1.1 | 1 | 0 | 0 |
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on 350 Dwyer Drive's reported OSHA injury record, strong versus its Cementing oil and gas well casings on a contract basis peers, but not a guarantee about any single site today.
- At 18% of the Cementing oil and gas well casings on a contract basis benchmark, 350 Dwyer Drive reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Cementing oil and gas well casings on a contract basis sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is 350 Dwyer Drive's safety grade?
How many injuries has 350 Dwyer Drive reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Wyoming, and by nearby establishments in Mills - a different peer set than the category browse links below.
Similar TCR (~0.3)
Similar size (~50 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.