Other Aircraft Parts and Auxiliary Equipment Manufacturing · California

Aerospace : Irvine FSD

Irvine, CA · ~487 workers · 7 years of OSHA Injury Tracking Application data.

A
Excellent Safety Record
0.7
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Aerospace : Irvine FSD runs at 22% of its industry's injury rate - far safer than the typical Other Aircraft Parts and Auxiliary Equipment Manufacturing workplace, earning a grade A.

A
Excellent Safety Record
0.7
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
16
recordable injuries tracked

Grade compares Aerospace : Irvine FSD's OSHA Total Case Rate to the BLS industry benchmark across 7 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.

Injury rate over time

Aerospace : Irvine FSD's yearly Total Case Rate, against the 3.3 industry benchmark.

-101234 2017201820192020202120222023 0.43.3 Industry benchmarkAerospace : Irvine FSD TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 336413.

Where Aerospace : Irvine FSD falls in its industry

724 Other Aircraft Parts and Auxil establishments

Safer than 72% of graded establishments in this industry, whose median TCR is 1.7.

More dangerous than peersSafer than peers

Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #25 safest of 109 Other Aircraft Parts and Auxil employers in California.

Aerospace : Irvine FSD has an average TCR of 0.7, which is 22% of the industry average (3.3) for Other Aircraft Parts and Auxiliary Equipment Manufacturing. This is significantly better than average.

The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.

Trend analysis for Aerospace : Irvine FSD

Between 2017 and 2023, Aerospace : Irvine FSD's Total Case Rate improved from 0.6 to 0.4 recordable injuries per 100 full-time workers, a 27% decrease across 6 years of OSHA reporting.

The safest year on record was 2021, at a TCR of 0.0, while 2019 saw the highest rate, at 2.7, a spread of 2.7 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 7 reporting years, Aerospace : Irvine FSD recorded 16 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 7-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

All injury, illness, and fatality figures on this page are sourced from Aerospace : Irvine FSD's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing.

DART Rate, Transparent Calculation (2023)

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 1,003,610 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Aerospace : Irvine FSD (this establishment) 0.71 OSHA ITA Form 300A, 7-year avg
Aircraft assemblies, subassemblies, and parts (except engines) manufacturing industry avg 3.30 BLS IIF, NAICS 336413
California state avg (all industries) 5.64 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Aerospace : Irvine FSD to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 0.4 0.0 2 0 0
2022 0.0 0.0 0 0 0
2021 0.0 0.0 0 0 0
2020 0.9 0.9 2 0 0
2019 2.7 1.1 7 0 0
2018 0.5 0.2 2 0 0
2017 0.6 0.4 3 0 0

What this grade means for you

Use this grade as a relative read on Aerospace : Irvine FSD's reported OSHA injury record, strong versus its Other Aircraft Parts and Auxiliary Equipment Manufacturing peers, but not a guarantee about any single site today.

  • At 22% of the Other Aircraft Parts and Auxiliary Equipment Manufacturing benchmark, Aerospace : Irvine FSD reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
  • Judge this record against the wider Other Aircraft Parts and Auxiliary Equipment Manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Aerospace : Irvine FSD's safety grade?
Aerospace : Irvine FSD has a safety grade of A (Excellent Safety Record). This grade is based on their average Total Case Rate (TCR) of 0.7 compared to the BLS industry benchmark of 3.3 for Other Aircraft Parts and Auxiliary Equipment Manufacturing.
How many injuries has Aerospace : Irvine FSD reported?
Aerospace : Irvine FSD has reported 16 total injuries and 0 fatalities across 7 years of OSHA data (2023, 2022, 2021, 2020, 2019, 2018, 2017). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry and by workforce size within California - a different peer set than the category browse links below.

Similar TCR (~0.7)

Similar size (~487 workers)

Explore More Safety Data

→ More employers in California → Industry: Other Aircraft Parts and Auxiliary Equipment Manufacturing → Safety grades explained → How to check employer safety → Understanding OSHA rates
Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2022, 2021, 2020, 2019, 2018, 2017. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Related

All employers → | Rankings →
Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.