Dampers, sheet metal (except stampings), manufacturing · Oklahoma
Airtech Products, Inc.
Tulsa, OK · ~39 workers · 8 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.3
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Airtech Products, Inc. runs at 160% of its industry's injury rate - more dangerous than the typical Dampers, sheet metal (except stampings), manufacturing workplace, earning a grade D.
Airtech Products, Inc.: 5.3 TCR = 160% of Dampers, sheet metal (except stampings), manufacturing BLS 3.3 · 8y Form 300A (see methodology below)
Airtech Products, Inc. safety composite
Airtech Products, Inc. scores strongest on dart rate (safer than 83% of same-industry peers) and weakest on total case rate (tcr) (safer than 41%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
58/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- D 5.29 per 100 workers
Safer than 41% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 83% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−2.4
2017→2024
Airtech Products, Inc. injury rate improved
Airtech Products, Inc.'s TCR fell 2.4 from 2.4 in 2017 to 0.0 in 2024. Peak filing year was 2022 at 17.8 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
2017=2.4 · 2018=3.8 · 2019=9.4 · 2020=0.0 · 2021=4.4 · 2022=17.8 · 2023=4.7 · 2024=0.0
OSHA ITA Form 300A scorecard
Establishment book 332322 · Tulsa, OK ABOVE-IND · SMALL
Grade D · TCR 5.3 · 160% of ind
- DART 0.0 DART
- RANK #5/11
- PHOTO Manufacturing
- BOOK 8y book
- INJ 17 inj
- SIZE ~39 FTE
Nearest TCR peer: Manufacturing (0.0 TCR gap)
Read with this employer → · Industry book → · Oklahoma employers → · Look up another →
Airtech Products, Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Airtech Products, Inc.
5.3 TCR
- Manufacturing
Manufacturing
5.3 TCR
- Cannon Tube Fa
Cannon Tube Fabrication
5.3 TCR
- Detroit Truck
Detroit Truck Manufacturing
5.3 TCR
- CEMCO - Fort W
CEMCO - Fort Worth Plant
5.3 TCR
What this shows Airtech Products, Inc. averages 5.3 TCR (160% of the Dampers, sheet metal (except stampings), manufacturing BLS benchmark).
Airtech Products, Inc. TCR series: 2017=2.4 · 2018=3.8 · 2019=9.4 · 2020=0 · 2021=4.4 · 2022=17.8 · 2023=4.7 · 2024=0 · BLS 3.3
Where Airtech Products, Inc. falls in its industry
1,158 Dampers, sheet metal (except s establishmentsSafer than 41% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Oklahoma alone (the establishments it most directly competes with for workers and contracts): ranked #5 safest of 11 Dampers, sheet metal (except s employers in Oklahoma.
Airtech Products, Inc. has fewer employees than the Dampers, sheet metal (except stampings), median and a higher injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2023 | 4.7 | 4.7 | 2 | 0 | 0 |
| 2022 | 17.8 | 7.6 | 7 | 0 | 0 |
| 2021 | 4.4 | 0.0 | 1 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 9.4 | 4.7 | 4 | 0 | 0 |
| 2018 | 3.8 | 3.8 | 2 | 0 | 0 |
| 2017 | 2.4 | 2.4 | 1 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332322 · OK · Tulsa
1,158 Dampers, sheet metal (except stampings), manufacturing employers nationwide with a credible TCR · 5,320 rated employers in Oklahoma with headcount on file · 1,004 employers in Tulsa, OK · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Manufacturing | 5.3 TCR |
| NAICS-TCR | Cannon Tube Fabrication | 5.3 TCR |
| NAICS-TCR | Detroit Truck Manufacturing | 5.3 TCR |
| NAICS-TCR | CEMCO - Fort Worth Plant | 5.3 TCR |
| STATE-SIZE | Jurgensmeyer Mushroom Co., LLC | 39 FTE |
| STATE-SIZE | Cotton Growers Cooperative | 39 FTE |
| STATE-SIZE | Ranger Oilfield Services Corporation | 39 FTE |
| STATE-SIZE | OG&E-Horseshoe Lake Power Plant | 39 FTE |
| CITY-NEAR | Saint Francis Hospital, Inc. | 6,668 FTE |
| CITY-NEAR | H&P IDC - U.S. Land | 6,014 FTE |
| CITY-NEAR | TUL-TULSA-MAINTENANCE BASE | 5,184 FTE |
| CITY-NEAR | 4795-AA-TUL-TULSA-TUL-TRML | 4,794 FTE |
| NAT-TCR | The Mellen Company, Inc. | 5.3 TCR |
| NAT-TCR | Optimist Van Nuys | 5.3 TCR |
| NAT-TCR | 604ROC | 5.3 TCR |
| NAT-TCR | JHI Group / Janotta & Herner | 5.3 TCR |
| NAT-SIZE | Best Mold & Mfg | 39 FTE |
| NAT-SIZE | The HMC Group Marketing, INC | 39 FTE |
| NAT-SIZE | Higgins Supply Co., Inc. | 39 FTE |
| NAT-SIZE | Industrial Piping & Welding LLC | 39 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.