Cold forgings made from purchased iron or steel, unfinished · Texas
Alloy & Stainless Fasteners
Houston, TX · ~134 workers · 3 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 3.8
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Alloy & Stainless Fasteners runs at 116% of its industry's injury rate - about level with the typical Cold forgings made from purchased iron or steel, unfinished workplace, earning a grade C.
Alloy & Stainless Fasteners: 3.8 TCR = 116% of Cold forgings made from purchased iron or steel, unfinished BLS 3.3 · 3y Form 300A (see methodology below)
Alloy & Stainless Fasteners safety composite
Alloy & Stainless Fasteners scores strongest on total case rate (tcr) (safer than 65% of same-industry peers) and weakest on dart rate (safer than 33%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
50/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 3.83 per 100 workers
Safer than 65% of industry peers
- DART rate
- F 3.57 per 100 workers
Safer than 33% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Alloy & Stainless Fasteners: 0.8 → 5.7 TCR
Peak year 2019 @ 5.7 TCR · DART/TCR 0.93× in 2019
Alloy & Stainless Fasteners's TCR rose 4.9 from 0.8 in 2016 to 5.7 in 2019. In 2019, DART was 0.93× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332111 · Houston, TX ABOVE-IND · MID
Grade C · TCR 3.8 · 116% of ind
- DART 3.6 DART
- RANK #18/27
- PHOTO Gerdau- Paragould RP
- BOOK 3y book
- INJ 14 inj
- SIZE ~134 FTE
Nearest TCR peer: Gerdau- Paragould RP (0.0 TCR gap)
Read with this employer → · Industry book → · Texas employers → · Look up another →
Alloy & Stainless Fasteners in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Gerdau- Parago
Gerdau- Paragould RP
3.9 TCR
- Wyman Gordon F
Wyman Gordon Forgings, Inc.
3.9 TCR
- This site
Alloy & Stainless Fasteners
3.8 TCR
- Apex Tool Grou
Apex Tool Group - Sumter
3.8 TCR
- Ellwood Texas
Ellwood Texas Forge Houston
3.8 TCR
What this shows Alloy & Stainless Fasteners averages 3.8 TCR (116% of the Cold forgings made from purchased iron or steel, unfinished BLS benchmark).
Alloy & Stainless Fasteners TCR series: 2016=0.8 · 2018=5 · 2019=5.7 · BLS 3.3
Where Alloy & Stainless Fasteners falls in its industry
241 Cold forgings made from purcha establishmentsSafer than 65% of graded establishments in this industry, whose median TCR is 5.0.
Narrower to Texas alone (the establishments it most directly competes with for workers and contracts): ranked #18 safest of 27 Cold forgings made from purcha employers in Texas.
Alloy & Stainless Fasteners has more employees than the Cold forgings made from purchased iron o median and a lower injury rate than the industry's median TCR of 5.0. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2019 | 5.7 | 3.6 | 7 | 1 | 0 |
| 2018 | 5.0 | 2.5 | 6 | 0 | 0 |
| 2016 | 0.8 | 0.0 | 1 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332111 · TX · Houston
241 Cold forgings made from purchased iron or steel, unfinished employers nationwide with a credible TCR · 38,394 rated employers in Texas with headcount on file · 5,116 employers in Houston, TX · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Gerdau- Paragould RP | 3.9 TCR |
| NAICS-TCR | Wyman Gordon Forgings, Inc. | 3.9 TCR |
| NAICS-TCR | Apex Tool Group - Sumter | 3.8 TCR |
| NAICS-TCR | Ellwood Texas Forge Houston | 3.8 TCR |
| STATE-SIZE | 2362/1956-Lubbock, TX-Mfg (Monsanto Co.) | 134 FTE |
| STATE-SIZE | Bluebonnet Electric Cooperative, Inc. - Giddings Campus | 134 FTE |
| STATE-SIZE | 111479-CHENIERE CC | 134 FTE |
| STATE-SIZE | Tripoint Construction Services Incorporated | 134 FTE |
| CITY-NEAR | IAH IAH | 11,560 FTE |
| CITY-NEAR | IAH - Airport United Airlines Offices | 10,239 FTE |
| CITY-NEAR | 6925-IAH | 9,442 FTE |
| CITY-NEAR | Houston Methodist Hospital Texas Medical Center | 8,873 FTE |
| NAT-TCR | Rives & Reynolds | 3.8 TCR |
| NAT-TCR | Lexington Home Health | 3.8 TCR |
| NAT-TCR | Laminate Division | 3.8 TCR |
| NAT-TCR | North American Assembly LLC | 3.8 TCR |
| NAT-SIZE | St Marys | 134 FTE |
| NAT-SIZE | Century Health and Rehabilitation Center | 134 FTE |
| NAT-SIZE | Mobile Paperboard | 134 FTE |
| NAT-SIZE | Capstone Ranch | 134 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.