Bushings, plastics, manufacturing · Pennsylvania
American Molding and Technologies Inc.
Fairview, PA · ~31 workers · 9 years of OSHA Injury Tracking Application data.
- A
- Excellent Safety Record
- 0.7
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
American Molding and Technologies Inc. runs at 22% of its industry's injury rate - far safer than the typical Bushings, plastics, manufacturing workplace, earning a grade A.
American Molding and Technologies Inc.: 0.7 TCR = 22% of Bushings, plastics, manufacturing BLS 3.3 · 9y Form 300A (see methodology below)
American Molding and Technologies Inc. safety composite
American Molding and Technologies Inc. scores strongest on total case rate (tcr) (safer than 96% of same-industry peers) and weakest on fatalities (safer than 50%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
81/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- A 0.73 per 100 workers
Safer than 96% of industry peers
- DART rate
- B 0 per 100 workers
Safer than 86% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
American Molding and Technologies Inc. held a steady TCR band
American Molding and Technologies Inc.'s TCR held near 0.0 from 0.0 in 2016 to 0.0 in 2024. Peak filing year was 2023 at 3.5 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).
2016=0.0 · 2017=0.0 · 2018=0.0 · 2019=0.0 · 2020=0.0 · 2021=0.0 · 2022=3.0 · 2023=3.5 · 2024=0.0
OSHA ITA Form 300A scorecard
Establishment book 326199 · Fairview, PA AT/BELOW-IND · SMALL
Grade A · TCR 0.7 · 22% of ind
- DART 0.0 DART
- RANK #9/183
- PHOTO Noble Plastics Inc
- BOOK 9y book
- INJ 2 inj
- SIZE ~31 FTE
Nearest TCR peer: Noble Plastics Inc (0.0 TCR gap)
Read with this employer → · Industry book → · Pennsylvania employers → · Look up another →
American Molding and Technologies Inc. in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
American Molding and Technologies Inc.
0.7 TCR
- Noble Plastics
Noble Plastics Inc
0.7 TCR
- Nypro, Inc
Nypro, Inc
0.7 TCR
- Leading Edge C
Leading Edge Countertops
0.7 TCR
- Greensboro Ree
Greensboro Reels - A880
0.7 TCR
What this shows American Molding and Technologies Inc. averages 0.7 TCR (22% of the Bushings, plastics, manufacturing BLS benchmark).
American Molding and Technologies Inc. TCR series: 2016=0 · 2017=0 · 2018=0 · 2019=0 · 2020=0 · 2021=0 · 2022=3 · 2023=3.5 · 2024=0 · BLS 3.3
Where American Molding and Technologies Inc. falls in its industry
2,838 Bushings, plastics, manufactur establishmentsSafer than 96% of graded establishments in this industry, whose median TCR is 3.5.
Narrower to Pennsylvania alone (the establishments it most directly competes with for workers and contracts): ranked #9 safest of 183 Bushings, plastics, manufactur employers in Pennsylvania.
American Molding and Technologies Inc. has fewer employees than the Bushings, plastics, manufacturing median and a lower injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2023 | 3.5 | 0.0 | 1 | 0 | 0 |
| 2022 | 3.0 | 0.0 | 1 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2018 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2017 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
326199 · PA · Fairview
2,838 Bushings, plastics, manufacturing employers nationwide with a credible TCR · 22,692 rated employers in Pennsylvania with headcount on file · 36 employers in Fairview, PA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Noble Plastics Inc | 0.7 TCR |
| NAICS-TCR | Nypro, Inc | 0.7 TCR |
| NAICS-TCR | Leading Edge Countertops | 0.7 TCR |
| NAICS-TCR | Greensboro Reels - A880 | 0.7 TCR |
| STATE-SIZE | Spawn Plant | 31 FTE |
| STATE-SIZE | Caputo & Guest Mushrooms | 31 FTE |
| STATE-SIZE | COLSC Cocalico Service Center | 31 FTE |
| STATE-SIZE | Phoenixville Service Building | 31 FTE |
| CITY-NEAR | Parker White Metal Co. | 276 FTE |
| CITY-NEAR | PHB Machining & Molding | 178 FTE |
| CITY-NEAR | GRIMM INDUSTRIES | 176 FTE |
| CITY-NEAR | API Technologies - Fairview Manufacturing | 172 FTE |
| NAT-TCR | TCCo-FL | 0.7 TCR |
| NAT-TCR | Western Kentucky University-Bowling Green | 0.7 TCR |
| NAT-TCR | Burnsville | 0.7 TCR |
| NAT-TCR | St. Louis | 0.7 TCR |
| NAT-SIZE | Landstar - Laredo | 31 FTE |
| NAT-SIZE | Pro-Arc Electrical Construction Company | 31 FTE |
| NAT-SIZE | Kamco Supply of NJ | 31 FTE |
| NAT-SIZE | Sanderson Farms Adel Feed Mill | 31 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.