Wood Products Mfg · California

Ampine, a Division of Timber Products

Sutter Creek, CA · ~98 workers · 5 years of OSHA Injury Tracking Application data.

C
Average Safety Record
4.0
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Ampine, a Division of Timber Products runs at 120% of its industry's injury rate - about level with the typical Wood Products Mfg workplace, earning a grade C.

C
Average Safety Record
4.0
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
18
recordable injuries tracked

Grade compares Ampine, a Division of Timber Products's OSHA Total Case Rate to the BLS industry benchmark across 5 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.

Injury rate over time

Ampine, a Division of Timber Products's yearly Total Case Rate, against the 3.3 industry benchmark.

-202468 20182020202120222023 03.3 Industry benchmarkAmpine, a Division of Timber Products TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 321219.

Where Ampine, a Division of Timber Products falls in its industry

131 Wood Products Mfg establishments

Safer than 25% of graded establishments in this industry, whose median TCR is 2.2.

More dangerous than peersSafer than peers

Ampine, a Division of Timber Products has an average TCR of 4.0, which is 120% of the industry average (3.3) for Wood Products Mfg. This is worse than average.

The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.

Trend analysis for Ampine, a Division of Timber Products

Between 2018 and 2023, Ampine, a Division of Timber Products's Total Case Rate held roughly steady from 0.0 to 0.0 recordable injuries per 100 full-time workers, a 0% change across 5 years of OSHA reporting.

The safest year on record was 2018, at a TCR of 0.0, while 2020 saw the highest rate, at 7.4, a spread of 7.4 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 5 reporting years, Ampine, a Division of Timber Products recorded 18 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 5-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

All injury, illness, and fatality figures on this page are sourced from Ampine, a Division of Timber Products's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 321219 - Wood Products Mfg.

DART Rate, Transparent Calculation (2023)

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

0 DART incidents × 200,000 ÷ 14,695 hours worked = 0.00 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Ampine, a Division of Timber Products (this establishment) 3.95 OSHA ITA Form 300A, 5-year avg
Oriented strandboard (OSB) manufacturing industry avg 3.30 BLS IIF, NAICS 321219
California state avg (all industries) 5.64 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Ampine, a Division of Timber Products to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 0.0 0.0 0 0 0
2022 7.0 4.7 5 1 0
2021 5.3 4.6 5 2 0
2020 7.4 2.5 8 1 0
2018 0.0 0.0 0 0 0

What this grade means for you

Use this grade as a relative read on Ampine, a Division of Timber Products's reported OSHA injury record versus its Wood Products Mfg peers, not a verdict on whether any single site is safe today.

  • At 120% of the Wood Products Mfg benchmark, Ampine, a Division of Timber Products reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Wood Products Mfg sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Ampine, a Division of Timber Products's safety grade?
Ampine, a Division of Timber Products has a safety grade of C (Average Safety Record). This grade is based on their average Total Case Rate (TCR) of 4.0 compared to the BLS industry benchmark of 3.3 for Wood Products Mfg.
How many injuries has Ampine, a Division of Timber Products reported?
Ampine, a Division of Timber Products has reported 18 total injuries and 0 fatalities across 5 years of OSHA data (2023, 2022, 2021, 2020, 2018). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry and by workforce size within California - a different peer set than the category browse links below.

Similar TCR (~4.0)

Similar size (~98 workers)

Explore More Safety Data

→ More employers in California → Industry: Wood Products Mfg → Safety grades explained → How to check employer safety → Understanding OSHA rates
Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2022, 2021, 2020, 2018. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Related

All employers → | Rankings →
Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.