Laminating metals and metal formed products without fabricating · California
Arvinyl Laminates LP
Corona, CA · ~26 workers · 8 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 5.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Arvinyl Laminates LP runs at 178% of its industry's injury rate - more dangerous than the typical Laminating metals and metal formed products without fabricating workplace, earning a grade D.
Arvinyl Laminates LP: 5.9 TCR = 178% of Laminating metals and metal formed products without fabricating BLS 3.3 · 8y Form 300A (see methodology below)
Arvinyl Laminates LP safety composite
Arvinyl Laminates LP scores strongest on fatalities (safer than 51% of same-industry peers) and weakest on dart rate (safer than 16%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
30/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- F 5.86 per 100 workers
Safer than 28% of industry peers
- DART rate
- F 5.17 per 100 workers
Safer than 16% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
Rising injury rate
Arvinyl Laminates LP: 4.0 → 5.2 TCR
Peak year 2018 @ 18.2 TCR · DART/TCR 0.88× in 2024
Arvinyl Laminates LP's TCR rose 1.2 from 4.0 in 2017 to 5.2 in 2024. Peak filing year was 2018 at 18.2 TCR. In 2024, DART was 0.88× this establishment's average TCR (severity share of cases).
OSHA ITA Form 300A scorecard
Establishment book 332813 · Corona, CA ABOVE-IND · SMALL
Grade D · TCR 5.9 · 178% of ind
- DART 5.2 DART
- RANK #53/74
- PHOTO Metal Plate Polishin…
- BOOK 8y book
- INJ 12 inj
- SIZE ~26 FTE
Nearest TCR peer: Metal Plate Polishing Inc (0.0 TCR gap)
Read with this employer → · Industry book → · California employers → · Look up another →
Arvinyl Laminates LP in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Arvinyl Laminates LP
5.9 TCR
- Metal Plate Po
Metal Plate Polishing Inc
5.9 TCR
- Diamond Chrome
Diamond Chrome Plating
5.9 TCR
- Electronics Me
Electronics Metal Finishing Corporation
5.9 TCR
- Astro Pak Corp
Astro Pak Corporation - North Carolina
5.8 TCR
What this shows Arvinyl Laminates LP averages 5.9 TCR (178% of the Laminating metals and metal formed products without fabricating BLS benchmark).
Arvinyl Laminates LP TCR series: 2017=4 · 2018=18.2 · 2019=11.4 · 2020=4.3 · 2021=3.8 · 2022=0 · 2023=0 · 2024=5.2 · BLS 3.3
Where Arvinyl Laminates LP falls in its industry
585 Laminating metals and metal fo establishmentsSafer than 28% of graded establishments in this industry, whose median TCR is 4.0.
Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #53 safest of 74 Laminating metals and metal fo employers in California.
Arvinyl Laminates LP has fewer employees than the Laminating metals and metal formed produ median and a higher injury rate than the industry's median TCR of 4.0. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 5.2 | 5.2 | 1 | 0 | 0 |
| 2023 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 3.8 | 3.8 | 1 | 0 | 0 |
| 2020 | 4.3 | 4.3 | 1 | 0 | 0 |
| 2019 | 11.4 | 0.0 | 3 | 0 | 0 |
| 2018 | 18.2 | 18.2 | 5 | 0 | 0 |
| 2017 | 4.0 | 0.0 | 1 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332813 · CA · Corona
585 Laminating metals and metal formed products without fabricating employers nationwide with a credible TCR · 51,834 rated employers in California with headcount on file · 409 employers in Corona, CA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Metal Plate Polishing Inc | 5.9 TCR |
| NAICS-TCR | Astro Pak Corporation - North Carolina | 5.8 TCR |
| NAICS-TCR | Diamond Chrome Plating | 5.9 TCR |
| NAICS-TCR | Electronics Metal Finishing Corporation | 5.9 TCR |
| STATE-SIZE | HAULING & TRAILER SHOP | 26 FTE |
| STATE-SIZE | Seasholtz Co., LLC | 26 FTE |
| STATE-SIZE | Redwood Valley Vineyards | 26 FTE |
| STATE-SIZE | North Central Coast Vineyards | 26 FTE |
| CITY-NEAR | Monster Energy Company 2535 Anselmo Dr | 2,572 FTE |
| CITY-NEAR | Monster Energy Company | 2,388 FTE |
| CITY-NEAR | Monster Energy Company - Anselmo Dr, Corona | 2,335 FTE |
| CITY-NEAR | California Department of Transportation Facility 289 | 1,587 FTE |
| NAT-TCR | Orlando North | 5.9 TCR |
| NAT-TCR | Suddekor LLC | 5.9 TCR |
| NAT-TCR | Enid Distribution Center | 5.9 TCR |
| NAT-TCR | Newbern Plant | 5.9 TCR |
| NAT-SIZE | FABco LLC Humble | 26 FTE |
| NAT-SIZE | Long Lake Assisted Living | 26 FTE |
| NAT-SIZE | Hanset Stainless, Inc. | 26 FTE |
| NAT-SIZE | BELDEN | 26 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.