Epoxy adhesives manufacturing · California
Axiom Materials, Inc.
Santa Ana, CA · ~146 workers · 5 years of OSHA Injury Tracking Application data.
- F
- Failing Safety Record
- 13.3
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Axiom Materials, Inc. runs at 402% of its industry's injury rate - far more dangerous than the typical Epoxy adhesives manufacturing workplace, earning a grade F.
- F
- Failing Safety Record
- 13.3
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 74
- recordable injuries tracked
Grade compares Axiom Materials, Inc.'s OSHA Total Case Rate of 13.3 to the Epoxy adhesives manufacturing BLS benchmark of 3.3 (402% of benchmark) across 5 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Axiom Materials, Inc.'s yearly Total Case Rate, against the 3.3 industry benchmark.
Where Axiom Materials, Inc. falls in its industry
315 Epoxy adhesives manufacturing establishmentsSafer than 0% of graded establishments in this industry, whose median TCR is 2.5.
Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #19 safest of 19 Epoxy adhesives manufacturing employers in California.
Trend analysis for Axiom Materials, Inc.
Between 2020 and 2024, Axiom Materials, Inc.'s Total Case Rate improved from 15.4 to 5.9 recordable injuries per 100 full-time workers, a 61% decrease across 4 years of OSHA reporting.
The safest year on record was 2024, at a TCR of 5.9, while 2023 saw the highest rate, at 17.5, a spread of 11.5 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 5 reporting years, Axiom Materials, Inc. recorded 74 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 5-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 74 injuries, 21 illnesses shown on this page for Axiom Materials, Inc. are sourced from its own 5 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 325520 - Epoxy adhesives manufacturing.
DART Rate, Transparent Calculation (2024)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
8 DART incidents × 200,000 ÷ 302,953 hours worked = 5.28 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Axiom Materials, Inc. (this establishment) | 13.28 | OSHA ITA Form 300A, 5-year avg |
| Adhesives (except asphalt, dental, gypsum base) manufacturing industry avg | 3.30 | BLS IIF, NAICS 325520 |
| California state avg (all industries) | 5.64 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Axiom Materials, Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 9 reportable incidents · 8 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 30 reportable incidents · 17 injuries, 13 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 24 reportable incidents · 19 injuries, 5 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 16 reportable incidents · 14 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 16 reportable incidents · 16 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 5.9 | 5.3 | 8 | 1 | 0 |
| 2023 | 17.5 | 15.7 | 17 | 13 | 0 |
| 2022 | 14.7 | 14.0 | 19 | 5 | 0 |
| 2021 | 12.9 | 8.9 | 14 | 2 | 0 |
| 2020 | 15.4 | 13.5 | 16 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Axiom Materials, Inc.'s reported OSHA injury record versus its Epoxy adhesives manufacturing peers, not a verdict on whether any single site is safe today.
- At 402% of the Epoxy adhesives manufacturing benchmark, Axiom Materials, Inc. reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
- Judge this record against the wider Epoxy adhesives manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Axiom Materials, Inc.'s safety grade?
How many injuries has Axiom Materials, Inc. reported?
Similar Employers
Matched by safety record across the industry, by workforce size within California, and by nearby establishments in Santa Ana - a different peer set than the category browse links below.
Similar TCR (~13.3)
Similar size (~146 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.