Motor vehicle metal parts stamping · Ohio
Bayloff Stamped Products
Kinsman, OH · ~57 workers · 5 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 4.7
- Avg TCR
- 5.4
- Industry avg
- 0
- Fatalities
The verdict
Bayloff Stamped Products runs at 87% of its industry's injury rate - about level with the typical Motor vehicle metal parts stamping workplace, earning a grade C.
- C
- Average Safety Record
- 4.7
- avg TCR · per 100 workers
- 5.4
- industry benchmark (BLS)
- 10
- recordable injuries tracked
Grade compares Bayloff Stamped Products's OSHA Total Case Rate of 4.7 to the Motor vehicle metal parts stamping BLS benchmark of 5.4 (87% of benchmark) across 5 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Bayloff Stamped Products's yearly Total Case Rate, against the 5.4 industry benchmark.
Where Bayloff Stamped Products falls in its industry
527 Motor vehicle metal parts stam establishmentsSafer than 47% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Ohio alone (the establishments it most directly competes with for workers and contracts): ranked #52 safest of 96 Motor vehicle metal parts stam employers in Ohio.
Trend analysis for Bayloff Stamped Products
Between 2016 and 2023, Bayloff Stamped Products's Total Case Rate held roughly steady from 0.0 to 4.7 recordable injuries per 100 full-time workers, a 0% change across 7 years of OSHA reporting.
The safest year on record was 2016, at a TCR of 0.0, while 2019 saw the highest rate, at 7.1, a spread of 7.1 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 5 reporting years, Bayloff Stamped Products recorded 10 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 5-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 10 injuries, 2 illnesses shown on this page for Bayloff Stamped Products are sourced from its own 5 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 336370 - Motor vehicle metal parts stamping.
DART Rate, Transparent Calculation (2023)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
1 DART incidents × 200,000 ÷ 85,506 hours worked = 2.34 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Bayloff Stamped Products (this establishment) | 4.69 | OSHA ITA Form 300A, 5-year avg |
| Job stampings, automotive, metal, manufacturing industry avg | 5.40 | BLS IIF, NAICS 336370 |
| Ohio state avg (all industries) | 3.90 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Bayloff Stamped Products to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2023: 2 reportable incidents · 1 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 4 reportable incidents · 3 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2016: 0 reportable incidents · 0 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 4.7 | 2.3 | 1 | 1 | 0 |
| 2020 | 6.2 | 4.1 | 3 | 0 | 0 |
| 2019 | 7.1 | 3.5 | 3 | 1 | 0 |
| 2017 | 5.5 | 1.8 | 3 | 0 | 0 |
| 2016 | 0.0 | 0.0 | 0 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Bayloff Stamped Products's reported OSHA injury record, strong versus its Motor vehicle metal parts stamping peers, but not a guarantee about any single site today.
- At 87% of the Motor vehicle metal parts stamping benchmark, Bayloff Stamped Products reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Motor vehicle metal parts stamping sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Bayloff Stamped Products's safety grade?
How many injuries has Bayloff Stamped Products reported?
Similar Employers
Matched by safety record across the industry, by workforce size within Ohio, and by nearby establishments in Kinsman - a different peer set than the category browse links below.
Similar TCR (~4.7)
Similar size (~57 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.