Rice milling · California

C&C Manufacturing inc dba C&C Engineering

Arbuckle, CA · ~21 workers · 5 years of OSHA Injury Tracking Application data.

B
Good Safety Record
2.2
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

C&C Manufacturing inc dba C&C Engineering runs at 66% of its industry's injury rate - safer than the typical Rice milling workplace, earning a grade B.

C&C Manufacturing inc dba C&C Engineering: 2.2 TCR = 66% of Rice milling BLS 3.3 · 5y Form 300A (see methodology below)

C&C Manufacturing inc dba C&C Engineering safety composite

C&C Manufacturing inc dba C&C Engineering scores strongest on total case rate (tcr) (safer than 80% of same-industry peers) and weakest on dart rate (safer than 30%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

56/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
B 2.17 per 100 workers

Safer than 80% of industry peers

DART rate
F 3.45 per 100 workers

Safer than 30% of industry peers

Fatalities
D 0

Safer than 52% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

C&C Manufacturing inc dba C&C Engineering: 0.2 → 10.3 TCR

Peak year 2024 @ 10.3 TCR · DART/TCR 1.59× in 2024

C&C Manufacturing inc dba C&C Engineering's TCR rose 10.1 from 0.2 in 2019 to 10.3 in 2024. In 2024, DART was 1.59× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 311212 · Arbuckle, CA AT/BELOW-IND · SMALL

Grade B · TCR 2.2 · 66% of ind

  • DART 3.5 DART
  • RANK #4/16
  • PHOTO Gulf Rice Milling LLC
  • BOOK 5y book
  • INJ 12 inj
  • SIZE ~21 FTE

Nearest TCR peer: Gulf Rice Milling LLC (0.0 TCR gap)

Read with this employer → · Industry book → · California employers → · Look up another →

C&C Manufacturing inc dba C&C Engineering in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows C&C Manufacturing inc dba C&C Engineering averages 2.2 TCR (66% of the Rice milling BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

C&C Manufacturing inc dba C&C Engineering TCR series: 2019=0.2 · 2020=0.1 · 2021=0.1 · 2023=0.1 · 2024=10.3 · BLS 3.3

Where C&C Manufacturing inc dba C&C Engineering falls in its industry

49 Rice milling establishments

Safer than 80% of graded establishments in this industry, whose median TCR is 3.5.

More dangerous than peersSafer than peers

Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #4 safest of 16 Rice milling employers in California.

C&C Manufacturing inc dba C&C Engineering (21 employees, TCR 2.2) among 29 same-industry peers, split at the industry median of 69 employees and a TCR of 3.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0100200300400500 051015 Average employees Total Case Rate C&C Manufacturing inc dba C&C Engineering
C&C Manufacturing inc dba C&C Engineering (21 employees, TCR 2.2) among 29 same-industry peers, split at the industry median of 69 employees and a TCR of 3.5

C&C Manufacturing inc dba C&C Engineering has fewer employees than the Rice milling median and a lower injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 10.3 3.5 3 0 0
2023 0.1 0.1 2 0 0
2021 0.1 0.1 1 1 0
2020 0.1 0.1 2 0 0
2019 0.2 0.1 4 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

311212 · CA · Arbuckle

49 Rice milling employers nationwide with a credible TCR · 51,834 rated employers in California with headcount on file · 20 employers in Arbuckle, CA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Gulf Rice Milling LLC 2.2 TCR
NAICS-TCR PGP Evansville 2.1 TCR
NAICS-TCR Tuckerman Drier Facility 2.0 TCR
NAICS-TCR Riviana Foods, Inc. 2.5 TCR
STATE-SIZE Poso Ridge,LLC 21 FTE
STATE-SIZE Fonseca & Fonseca, Inc. 21 FTE
STATE-SIZE TELESIS ONION CO., INC. 21 FTE
STATE-SIZE Mayflower Farms Inc 21 FTE
CITY-NEAR T & P Farms, LP 264 FTE
CITY-NEAR Alsco Geyer Irrigation, Inc. 162 FTE
CITY-NEAR Arbuckle Rice Mill 123 FTE
CITY-NEAR Sun Valley Rice, LLC 112 FTE
NAT-TCR Tri-State Roofing & Sheet Metal Company 2.2 TCR
NAT-TCR TriStar Skyline Madison Behavioral Campus 2.2 TCR
NAT-TCR The Vines Senior Homes 2.2 TCR
NAT-TCR W.G. Clark 2.2 TCR
NAT-SIZE Smokey Point Electric Inc. 21 FTE
NAT-SIZE JE Gibson Inc 21 FTE
NAT-SIZE North End Wrecking Inc 21 FTE
NAT-SIZE a.d. winston Service, Inc 21 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2021, 2020, 2019. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.