City Machine & Welding Inc.
Open-data reference.
AMARILLO, TX | Gas generating machinery, general purpose-type, manufacturing
~59 avg employees | 8 years of OSHA data
City Machine & Welding Inc. has an average TCR of 3.0, which is 90% of the industry average (3.3) for Gas generating machinery, general purpose-type, manufacturing. This is better than average.
Safety Insights for City Machine & Welding Inc.
City Machine & Welding Inc. operates an establishment with approximately 59 full-time equivalent workers in AMARILLO, TX, classified under the Gas generating machinery, general purpose-type, manufacturing industry (NAICS 333999). Across 8 years of mandatory OSHA Injury Tracking Application (ITA) reporting, this employer has accumulated 13 recordable injuries, 0 occupational illnesses, and 0 workplace fatalities. The average Total Case Rate (TCR) of 3.0 injuries per 100 full-time workers per year provides the anchor metric for the C letter grade (Average Safety Record).
Benchmarked against the Bureau of Labor Statistics industry average of 3.3 for Gas generating machinery, general purpose-type, manufacturing, City Machine & Welding Inc.'s workforce experiences 90% of the typical injury burden. This ratio matters because TCR already normalizes for hours worked — a 200,000-hour exposure base equals roughly 100 full-time workers — so establishments with very different headcounts can be compared directly. A TCR below the benchmark signals that controls, training, or automation may be outperforming peers.
Multi-year trend analysis is the single most reliable signal here: a one-year spike could reflect a single severe event, whereas sustained elevation across 8 reporting cycles points to systemic hazard exposure. Readers evaluating City Machine & Welding Inc. as an employer, contractor, investment, or regulatory target should examine the yearly DART rate (days away, restricted, or transferred), the fatality count of 0, and any year-over-year deterioration shown in the table below. All figures come directly from employer-submitted OSHA Form 300A summaries — there is no modeling, estimation, or third-party adjustment layered on top of the government data.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from City Machine & Welding Inc.'s own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source — name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor — OSHA Establishment-Specific Injury and Illness Data. NAICS 333999 — Gas generating machinery, general purpose-type, manufacturing.
DART Rate — Transparent Calculation (2024)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
2 DART incidents × 200,000 ÷ 115,082 hours worked = 3.48 DART
Methodology: 29 CFR 1904 — OSHA Form 300A recordkeeping
Cross-Validating Context — Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| City Machine & Welding Inc. (this establishment) | 2.98 | OSHA ITA Form 300A, 8-year avg |
| Screening and sifting machinery for general industrial use manufacturing industry avg | 3.30 | BLS IIF, NAICS 333999 |
| Texas state avg (all industries) | 11.19 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics — Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by City Machine & Welding Inc. to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2023: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2022: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2021: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2020: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2019: 2 reportable incidents · 2 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2018: 1 reportable incidents · 1 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
- 2017: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities — OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) — inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.5 | 3.5 | 2 | 0 | 0 |
| 2023 | 1.5 | 1.5 | 1 | 0 | 0 |
| 2022 | 1.7 | 0.0 | 1 | 0 | 0 |
| 2021 | 4.3 | 4.3 | 2 | 0 | 0 |
| 2020 | 2.4 | 0.0 | 1 | 0 | 0 |
| 2019 | 3.8 | 0.0 | 2 | 0 | 0 |
| 2018 | 1.9 | 1.9 | 1 | 0 | 0 |
| 2017 | 4.9 | 4.9 | 3 | 0 | 0 |
Frequently Asked Questions
What is City Machine & Welding Inc.'s safety grade?
How is the safety grade calculated?
How many injuries has City Machine & Welding Inc. reported?
Where does PlainSafetyScore get its data?
Explore More Safety Data
Read our methodology — how this data is sourced, computed, and verified.