Machine shops · New Hampshire

C&M Machine Products, Inc/DBA C&M Precision Tech

Hudson, NH · ~74 workers · 2 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
8.2
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

C&M Machine Products, Inc/DBA C&M Precision Tech runs at 249% of its industry's injury rate - far more dangerous than the typical Machine shops workplace, earning a grade F.

C&M Machine Products, Inc/DBA C&M Precision Tech: 8.2 TCR = 249% of Machine shops BLS 3.3 · 2y Form 300A (see methodology below)

C&M Machine Products, Inc/DBA C&M Precision Tech safety composite

C&M Machine Products, Inc/DBA C&M Precision Tech scores strongest on fatalities (safer than 50% of same-industry peers) and weakest on dart rate (safer than 5%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

F

19/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
F 8.21 per 100 workers

Safer than 13% of industry peers

DART rate
F 6.93 per 100 workers

Safer than 5% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

Rising injury rate

C&M Machine Products, Inc/DBA C&M Precision Tech: 4.0 → 12.5 TCR

Peak year 2020 @ 12.5 TCR · DART/TCR 0.84× in 2020

C&M Machine Products, Inc/DBA C&M Precision Tech's TCR rose 8.5 from 4.0 in 2019 to 12.5 in 2020. In 2020, DART was 0.84× this establishment's average TCR (severity share of cases).

OSHA ITA Form 300A scorecard

Establishment book 332710 · Hudson, NH ABOVE-IND · SMALL

Grade F · TCR 8.2 · 249% of ind

  • DART 6.9 DART
  • RANK #30/30
  • PHOTO Wrabacon Inc
  • BOOK 2y book
  • INJ 7 inj
  • SIZE ~74 FTE

Nearest TCR peer: Wrabacon Inc (0.0 TCR gap)

Read with this employer → · Industry book → · New Hampshire employers → · Look up another →

C&M Machine Products, Inc/DBA C&M Precision Tech in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows C&M Machine Products, Inc/DBA C&M Precision Tech averages 8.2 TCR (249% of the Machine shops BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

C&M Machine Products, Inc/DBA C&M Precision Tech TCR series: 2019=4 · 2020=12.5 · BLS 3.3

Where C&M Machine Products, Inc/DBA C&M Precision Tech falls in its industry

1,821 Machine shops establishments

Safer than 13% of graded establishments in this industry, whose median TCR is 3.5.

More dangerous than peersSafer than peers

Narrower to New Hampshire alone (the establishments it most directly competes with for workers and contracts): ranked #30 safest of 30 Machine shops employers in New Hampshire.

C&M Machine Products, Inc/DBA C&M Precision Tech (74 employees, TCR 8.2) among 29 same-industry peers, split at the industry median of 48 employees and a TCR of 3.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 050100150200250 051015 Average employees Total Case Rate C&M Machine Products, Inc/DBA C&M Precision Tech
C&M Machine Products, Inc/DBA C&M Precision Tech (74 employees, TCR 8.2) among 29 same-industry peers, split at the industry median of 48 employees and a TCR of 3.5

C&M Machine Products, Inc/DBA C&M Precision Tech has more employees than the Machine shops median and a higher injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2020 12.5 6.9 4 5 0
2019 4.0 1.3 3 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332710 · NH · Hudson

1,821 Machine shops employers nationwide with a credible TCR · 2,718 rated employers in New Hampshire with headcount on file · 59 employers in Hudson, NH · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Wrabacon Inc 8.2 TCR
NAICS-TCR DL Martin Company East 8.2 TCR
NAICS-TCR Hahn Manufacturing Company 8.2 TCR
NAICS-TCR Acme Machine & Welding Co LLC 8.2 TCR
STATE-SIZE Preferred Building Systems 74 FTE
STATE-SIZE Salem Office 74 FTE
STATE-SIZE Durgin and Crowell Lumber Company Inc. 74 FTE
STATE-SIZE Temco Tool Co Inc 74 FTE
CITY-NEAR BAE Systems Electronic Systems PTP 1,082 FTE
CITY-NEAR 55 Executive Drive 776 FTE
CITY-NEAR 15965 656 FTE
CITY-NEAR Market Basket #33 325 FTE
NAT-TCR 1855-MIDET399 8.2 TCR
NAT-TCR Ambassador Steel-Menomonie Wisconsin 8.2 TCR
NAT-TCR Bridgeview IL Store 8.2 TCR
NAT-TCR Main 8.2 TCR
NAT-SIZE American Girl Wash DC 74 FTE
NAT-SIZE 100 Wampanoag Trail Operating Company, LLC 74 FTE
NAT-SIZE Boyer's Food Markets -Orwigbsurg 74 FTE
NAT-SIZE Boyer's Food Markets -Pottsville 74 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2020, 2019. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.