Epoxy adhesives manufacturing · California
Composite Material Division
Irvine, CA · ~126 workers · 2 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.5
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Composite Material Division runs at 75% of its industry's injury rate - safer than the typical Epoxy adhesives manufacturing workplace, earning a grade B.
- B
- Good Safety Record
- 2.5
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 6
- recordable injuries tracked
Grade compares Composite Material Division's OSHA Total Case Rate of 2.5 to the Epoxy adhesives manufacturing BLS benchmark of 3.3 (75% of benchmark) across 2 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.
Injury rate over time
Composite Material Division's yearly Total Case Rate, against the 3.3 industry benchmark.
Where Composite Material Division falls in its industry
315 Epoxy adhesives manufacturing establishmentsSafer than 50% of graded establishments in this industry, whose median TCR is 2.5.
Narrower to California alone (the establishments it most directly competes with for workers and contracts): ranked #10 safest of 19 Epoxy adhesives manufacturing employers in California.
Trend analysis for Composite Material Division
Between 2017 and 2018, Composite Material Division's Total Case Rate worsened from 2.1 to 2.9 recordable injuries per 100 full-time workers, a 35% increase across 1 year of OSHA reporting.
The safest year on record was 2017, at a TCR of 2.1, while 2018 saw the highest rate, at 2.9, a spread of 0.7 points between the best and worst reporting years. That's a comparatively narrow spread, suggesting a fairly consistent safety record across the 2 years with a usable rate on file, rather than one outlier year skewing the multi-year average.
Summed across those 2 reporting years, Composite Material Division recorded 6 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 2-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
The 6 injuries, 1 illnesses shown on this page for Composite Material Division are sourced from its own 2 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 325520 - Epoxy adhesives manufacturing.
DART Rate, Transparent Calculation (2018)
What is the DART rate formula?
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
4 DART incidents × 200,000 ÷ 279,593 hours worked = 2.86 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| Composite Material Division (this establishment) | 2.49 | OSHA ITA Form 300A, 2-year avg |
| Adhesives (except asphalt, dental, gypsum base) manufacturing industry avg | 3.30 | BLS IIF, NAICS 325520 |
| California state avg (all industries) | 5.64 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Composite Material Division to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2018: 4 reportable incidents · 3 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2017: 3 reportable incidents · 3 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2018 | 2.9 | 2.9 | 3 | 1 | 0 |
| 2017 | 2.1 | 2.1 | 3 | 0 | 0 |
What this grade means for you
Use this grade as a relative read on Composite Material Division's reported OSHA injury record, strong versus its Epoxy adhesives manufacturing peers, but not a guarantee about any single site today.
- At 75% of the Epoxy adhesives manufacturing benchmark, Composite Material Division reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Epoxy adhesives manufacturing sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is Composite Material Division's safety grade?
How many injuries has Composite Material Division reported?
Similar Employers
Matched by safety record across the industry, by workforce size within California, and by nearby establishments in Irvine - a different peer set than the category browse links below.
Similar TCR (~2.5)
Similar size (~126 workers)
Read our methodology - how this data is sourced, computed, and verified.
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.