Cutters, metal milling, manufacturing · Maine

Contour

Cornish, ME · ~40 workers · 3 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
6.8
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Contour runs at 207% of its industry's injury rate - far more dangerous than the typical Cutters, metal milling, manufacturing workplace, earning a grade F.

Contour: 6.8 TCR = 207% of Cutters, metal milling, manufacturing BLS 3.3 · 3y Form 300A (see methodology below)

Contour safety composite

Contour scores strongest on dart rate (safer than 74% of same-industry peers) and weakest on total case rate (tcr) (safer than 7%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

D

41/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
F 6.84 per 100 workers

Safer than 7% of industry peers

DART rate
C 0 per 100 workers

Safer than 74% of industry peers

Fatalities
D 0

Safer than 50% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−0.8

2016→2021

Contour injury rate improved

Contour's TCR fell 0.8 from 8.1 in 2016 to 7.3 in 2021. Peak filing year was 2016 at 8.1 TCR. In 2021, DART was 0× this establishment's average TCR (severity share of cases).

2016=8.1 · 2020=5.1 · 2021=7.3

OSHA ITA Form 300A scorecard

Establishment book 333515 · Cornish, ME ABOVE-IND · SMALL

Grade F · TCR 6.8 · 207% of ind

  • DART 0.0 DART
  • RANK #4/4
  • PHOTO Hannibal Carbide Too…
  • BOOK 3y book
  • INJ 7 inj
  • SIZE ~40 FTE

Nearest TCR peer: Hannibal Carbide Tool, Inc. (0.1 TCR gap)

Read with this employer → · Industry book → · Maine employers → · Look up another →

Contour in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Contour averages 6.8 TCR (207% of the Cutters, metal milling, manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Contour TCR series: 2016=8.1 · 2020=5.1 · 2021=7.3 · BLS 3.3

Where Contour falls in its industry

221 Cutters, metal milling, manufa establishments

Safer than 7% of graded establishments in this industry, whose median TCR is 2.5.

More dangerous than peersSafer than peers

Narrower to Maine alone (the establishments it most directly competes with for workers and contracts): ranked #4 safest of 4 Cutters, metal milling, manufa employers in Maine.

Contour (40 employees, TCR 6.8) among 29 same-industry peers, split at the industry median of 71 employees and a TCR of 2.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 0200400600 051015 Average employees Total Case Rate Contour
Contour (40 employees, TCR 6.8) among 29 same-industry peers, split at the industry median of 71 employees and a TCR of 2.5

Contour has fewer employees than the Cutters, metal milling, manufacturing median and a higher injury rate than the industry's median TCR of 2.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2021 7.3 0.0 2 0 0
2020 5.1 0.0 2 0 0
2016 8.1 2.7 3 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

333515 · ME · Cornish

221 Cutters, metal milling, manufacturing employers nationwide with a credible TCR · 2,397 rated employers in Maine with headcount on file · 3 employers in Cornish, ME · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Hannibal Carbide Tool, Inc. 6.7 TCR
NAICS-TCR Laserform and Machine, Inc. 7.1 TCR
NAICS-TCR Harvey Performance Operating - Gorham Maine 6.5 TCR
NAICS-TCR HBUS 6.5 TCR
STATE-SIZE Eastern Maine Electric Cooperation, Inc. 40 FTE
STATE-SIZE CMP - Brunswick Service Building 40 FTE
STATE-SIZE Prock Marine Company 40 FTE
STATE-SIZE W.H. Demmons 40 FTE
CITY-NEAR ME02-COR-CORNISH 37 FTE
CITY-NEAR ARCH Cutting Tools - Maine LLC 37 FTE
NAT-TCR Alta Equipment Company 6.8 TCR
NAT-TCR Wolfe Dye and Bleach Works, Inc. 6.8 TCR
NAT-TCR Metcalfe's- West 6.8 TCR
NAT-TCR Ryder DPSG (WC USX DPF) 6.8 TCR
NAT-SIZE Headquarters 40 FTE
NAT-SIZE Southeast Division Eufaula State Docks Complex 40 FTE
NAT-SIZE Laddawn, Inc. Sparks, NV 40 FTE
NAT-SIZE White Castle System, Inc. - Lebanon Meat Plant 40 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2021, 2020, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.