Sawmills · South Carolina
CSP Conway
Conway, SC · ~196 workers · 6 years of OSHA Injury Tracking Application data.
- C
- Average Safety Record
- 2.9
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
CSP Conway runs at 87% of its industry's injury rate - about level with the typical Sawmills workplace, earning a grade C.
- C
- Average Safety Record
- 2.9
- avg TCR · per 100 workers
- 3.3
- industry benchmark (BLS)
- 29
- recordable injuries tracked
Grade compares CSP Conway's OSHA Total Case Rate to the BLS industry benchmark across 6 years of Form 300A filings (2016–2024). This reflects reported recordable injuries, not an independent safety inspection -- underreporting is a known limitation of employer self-recordkeeping.
Injury rate over time
CSP Conway's yearly Total Case Rate, against the 3.3 industry benchmark.
Where CSP Conway falls in its industry
941 Sawmills establishmentsSafer than 69% of graded establishments in this industry, whose median TCR is 5.0.
Narrower to South Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #11 safest of 22 Sawmills employers in South Carolina.
CSP Conway has an average TCR of 2.9, which is 87% of the industry average (3.3) for Sawmills. This is better than average.
The letter grade is a transparent derived index PlainSafetyScore computes from public OSHA ITA and BLS benchmark data, not an official OSHA rating or safety certification. Full formula and thresholds: Methodology.
Trend analysis for CSP Conway
Between 2019 and 2024, CSP Conway's Total Case Rate worsened from 1.4 to 2.6 recordable injuries per 100 full-time workers, a 93% increase across 5 years of OSHA reporting.
The safest year on record was 2019, at a TCR of 1.4, while 2023 saw the highest rate, at 4.2, a spread of 2.9 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.
Summed across those 6 reporting years, CSP Conway recorded 29 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 6-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.
Verify This Employer with OSHA
All injury, illness, and fatality figures on this page are sourced from CSP Conway's own mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.
Verify on OSHA Establishment SearchSource: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 321113 - Sawmills.
DART Rate, Transparent Calculation (2024)
DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.
4 DART incidents × 200,000 ÷ 459,256 hours worked = 1.74 DART
Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping
Cross-Validating Context, Establishment vs Industry vs State
| Benchmark | TCR | Source |
|---|---|---|
| CSP Conway (this establishment) | 2.88 | OSHA ITA Form 300A, 6-year avg |
| Sawmills industry avg | 3.30 | BLS IIF, NAICS 321113 |
| South Carolina state avg (all industries) | 4.08 | OSHA ITA, state-level rollup |
Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program
Reportable Incident Timeline
Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by CSP Conway to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.
- 2024: 6 reportable incidents · 6 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2023: 10 reportable incidents · 8 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2022: 8 reportable incidents · 8 injuries, 0 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2021: 4 reportable incidents · 3 injuries, 1 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2020: 7 reportable incidents · 3 injuries, 4 illnesses, 0 fatalities - OSHA inspection records (case numbers)
- 2019: 3 reportable incidents · 1 injuries, 2 illnesses, 0 fatalities - OSHA inspection records (case numbers)
Source: OSHA Inspection Information System (IMIS) - inspection case-number records
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 2.6 | 1.7 | 6 | 0 | 0 |
| 2023 | 4.2 | 2.1 | 8 | 2 | 0 |
| 2022 | 3.6 | 0.5 | 8 | 0 | 0 |
| 2021 | 2.1 | 1.0 | 3 | 1 | 0 |
| 2020 | 3.4 | 1.0 | 3 | 4 | 0 |
| 2019 | 1.4 | 0.0 | 1 | 2 | 0 |
What this grade means for you
Use this grade as a relative read on CSP Conway's reported OSHA injury record, strong versus its Sawmills peers, but not a guarantee about any single site today.
- At 87% of the Sawmills benchmark, CSP Conway reports fewer injuries than typical peers, still worth asking how safety is managed day to day. Know your rights
- Judge this record against the wider Sawmills sector, where injury rates vary widely, before comparing it in isolation. See the industry
- Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another
Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.
Frequently Asked Questions
What is CSP Conway's safety grade?
How many injuries has CSP Conway reported?
Similar Employers
Matched by safety record across the industry and by workforce size within South Carolina - a different peer set than the category browse links below.
Similar TCR (~2.9)
Explore More Safety Data
Read our methodology - how this data is sourced, computed, and verified.
Related
Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.