Canopies, sheet metal (except stampings), manufacturing · Georgia
Daiki Corporation
Adairsville, GA · ~96 workers · 7 years of OSHA Injury Tracking Application data.
- D
- Poor Safety Record
- 4.0
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Daiki Corporation runs at 123% of its industry's injury rate - more dangerous than the typical Canopies, sheet metal (except stampings), manufacturing workplace, earning a grade D.
Daiki Corporation: 4.0 TCR = 123% of Canopies, sheet metal (except stampings), manufacturing BLS 3.3 · 7y Form 300A (see methodology below)
Daiki Corporation safety composite
Daiki Corporation scores strongest on total case rate (tcr) (safer than 56% of same-industry peers) and weakest on dart rate (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
53/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 4.05 per 100 workers
Safer than 56% of industry peers
- DART rate
- D 1.8 per 100 workers
Safer than 51% of industry peers
- Fatalities
- D 0
Safer than 51% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−1.9
2016→2023
Daiki Corporation injury rate improved
Daiki Corporation's TCR fell 1.9 from 5.5 in 2016 to 3.6 in 2023. Peak filing year was 2022 at 7.0 TCR. In 2023, DART was 0.44× this establishment's average TCR (severity share of cases).
2016=5.5 · 2017=2.5 · 2018=2.3 · 2019=2.5 · 2020=5.0 · 2022=7.0 · 2023=3.6
OSHA ITA Form 300A scorecard
Establishment book 332322 · Adairsville, GA ABOVE-IND · SMALL
Grade D · TCR 4.0 · 123% of ind
- DART 1.8 DART
- RANK #34/61
- PHOTO Stainless Steel Limi…
- BOOK 7y book
- INJ 28 inj
- SIZE ~96 FTE
Nearest TCR peer: Stainless Steel Limited (0.0 TCR gap)
Read with this employer → · Industry book → · Georgia employers → · Look up another →
Daiki Corporation in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- Stainless Stee
Stainless Steel Limited
4.1 TCR
- Oaks Precision
Oaks Precision Fabricating, Inc.
4.1 TCR
- This site
Daiki Corporation
4 TCR
- Rack-it, LLC
Rack-it, LLC
4 TCR
- Edmunds Metal
Edmunds Metal Works, Inc.
4 TCR
What this shows Daiki Corporation averages 4.0 TCR (123% of the Canopies, sheet metal (except stampings), manufacturing BLS benchmark).
Daiki Corporation TCR series: 2016=5.5 · 2017=2.5 · 2018=2.3 · 2019=2.5 · 2020=5 · 2022=7 · 2023=3.6 · BLS 3.3
Where Daiki Corporation falls in its industry
1,158 Canopies, sheet metal (except establishmentsSafer than 56% of graded establishments in this industry, whose median TCR is 4.5.
Narrower to Georgia alone (the establishments it most directly competes with for workers and contracts): ranked #34 safest of 61 Canopies, sheet metal (except employers in Georgia.
Daiki Corporation has more employees than the Canopies, sheet metal (except stampings) median and a lower injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2023 | 3.6 | 1.8 | 4 | 0 | 0 |
| 2022 | 7.0 | 2.6 | 8 | 0 | 0 |
| 2020 | 5.0 | 1.2 | 4 | 0 | 0 |
| 2019 | 2.5 | 0.0 | 3 | 0 | 0 |
| 2018 | 2.3 | 0.0 | 3 | 0 | 0 |
| 2017 | 2.5 | 1.7 | 2 | 1 | 0 |
| 2016 | 5.5 | 2.8 | 4 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332322 · GA · Adairsville
1,158 Canopies, sheet metal (except stampings), manufacturing employers nationwide with a credible TCR · 14,941 rated employers in Georgia with headcount on file · 39 employers in Adairsville, GA · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | Stainless Steel Limited | 4.1 TCR |
| NAICS-TCR | Rack-it, LLC | 4.0 TCR |
| NAICS-TCR | Edmunds Metal Works, Inc. | 4.0 TCR |
| NAICS-TCR | Oaks Precision Fabricating, Inc. | 4.1 TCR |
| STATE-SIZE | Gwinnett District - Jackson EMC | 96 FTE |
| STATE-SIZE | Atlanta Operating - 760 Ralph McGill Boulevard | 96 FTE |
| STATE-SIZE | Gwinnett Operating 1453 Highway 120 Lawrenceville | 96 FTE |
| STATE-SIZE | Columbus Operating - 3610 Gentian Boulevard Columbus, GA | 96 FTE |
| CITY-NEAR | 2807-1457 | 848 FTE |
| CITY-NEAR | 1457 LOWE S NORTHERN GA RDC | 747 FTE |
| CITY-NEAR | Plant L3/LG | 503 FTE |
| CITY-NEAR | Plant L3 | 404 FTE |
| NAT-TCR | Hilton Garden Inn Murfreesboro | 4.0 TCR |
| NAT-TCR | S D Ellenbecker INC | 4.0 TCR |
| NAT-TCR | Graceville | 4.0 TCR |
| NAT-TCR | LH- 6 St.Andrew's Lane | 4.0 TCR |
| NAT-SIZE | 10402 Laurelhurst (WO) | 96 FTE |
| NAT-SIZE | IQE, Inc. | 96 FTE |
| NAT-SIZE | McAllen Nursing Center | 96 FTE |
| NAT-SIZE | TENAX | 96 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.