Sheet metal work (except stampings) manufacturing · Missouri

Stainless Steel Limited

Miller, MO · ~24 workers · 9 years of OSHA Injury Tracking Application data.

D
Poor Safety Record
4.1
Avg TCR
3.3
Industry avg
0
Fatalities
Subscribe to safety-record updates (RSS)

The verdict

Stainless Steel Limited runs at 123% of its industry's injury rate - more dangerous than the typical Sheet metal work (except stampings) manufacturing workplace, earning a grade D.

Stainless Steel Limited: 4.1 TCR = 123% of Sheet metal work (except stampings) manufacturing BLS 3.3 · 9y Form 300A (see methodology below)

Stainless Steel Limited safety composite

Stainless Steel Limited scores strongest on dart rate (safer than 83% of same-industry peers) and weakest on fatalities (safer than 51%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).

C

64/100

Percentile-weighted across 3 of 3 measures

Total Case Rate (TCR)
C 4.06 per 100 workers

Safer than 56% of industry peers

DART rate
B 0 per 100 workers

Safer than 83% of industry peers

Fatalities
D 0

Safer than 51% of industry peers

Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).

TCR Δ

−0.7

2016→2024

Stainless Steel Limited injury rate improved

Stainless Steel Limited's TCR fell 0.7 from 4.1 in 2016 to 3.4 in 2024. Peak filing year was 2017 at 8.1 TCR. In 2024, DART was 0× this establishment's average TCR (severity share of cases).

2016=4.1 · 2017=8.1 · 2018=0.0 · 2019=3.6 · 2020=3.9 · 2021=0.0 · 2022=7.0 · 2023=6.5 · 2024=3.4

OSHA ITA Form 300A scorecard

Establishment book 332322 · Miller, MO ABOVE-IND · SMALL

Grade D · TCR 4.1 · 123% of ind

  • DART 0.0 DART
  • RANK #6/19
  • PHOTO Daiki Corporation
  • BOOK 9y book
  • INJ 10 inj
  • SIZE ~24 FTE

Nearest TCR peer: Daiki Corporation (0.0 TCR gap)

Read with this employer → · Industry book → · Missouri employers → · Look up another →

Stainless Steel Limited in the TCR neighbourhood

Average Total Case Rate among this establishment and nearest same-industry peers

TCR

What this shows Stainless Steel Limited averages 4.1 TCR (123% of the Sheet metal work (except stampings) manufacturing BLS benchmark).

Source U.S. Department of Labor, OSHA Injury Tracking Application (Form 300A) As of 2026-08-25

Stainless Steel Limited TCR series: 2016=4.1 · 2017=8.1 · 2018=0 · 2019=3.6 · 2020=3.9 · 2021=0 · 2022=7 · 2023=6.5 · 2024=3.4 · BLS 3.3

Where Stainless Steel Limited falls in its industry

1,158 Sheet metal work (except stamp establishments

Safer than 56% of graded establishments in this industry, whose median TCR is 4.5.

More dangerous than peersSafer than peers

Narrower to Missouri alone (the establishments it most directly competes with for workers and contracts): ranked #6 safest of 19 Sheet metal work (except stamp employers in Missouri.

Stainless Steel Limited (24 employees, TCR 4.1) among 29 same-industry peers, split at the industry median of 58 employees and a TCR of 4.5 2×2 strategic matrix plotting 30 entities by Average employees (X) and Total Case Rate (Y), with a crosshair dividing the plot into four quadrants. Larger & higher-riskSmaller & higher-riskLarger & saferSmaller & safer than peers 050100150200 05101520 Average employees Total Case Rate Stainless Steel Limited
Stainless Steel Limited (24 employees, TCR 4.1) among 29 same-industry peers, split at the industry median of 58 employees and a TCR of 4.5

Stainless Steel Limited has fewer employees than the Sheet metal work (except stampings) manu median and a lower injury rate than the industry's median TCR of 4.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 3.4 0.0 1 0 0
2023 6.5 6.5 2 0 0
2022 7.0 7.0 2 0 0
2021 0.0 0.0 0 0 0
2020 3.9 0.0 1 0 0
2019 3.6 3.6 1 0 0
2018 0.0 0.0 0 0 0
2017 8.1 4.1 2 0 0
2016 4.1 0.0 1 0 0

OSHA ITA peer cross-reference

Establishment peer ledger

332322 · MO · Miller

1,158 Sheet metal work (except stampings) manufacturing employers nationwide with a credible TCR · 10,075 rated employers in Missouri with headcount on file · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.

Rel Establishment Metric
NAICS-TCR Daiki Corporation 4.0 TCR
NAICS-TCR Oaks Precision Fabricating, Inc. 4.1 TCR
NAICS-TCR Rack-it, LLC 4.0 TCR
NAICS-TCR Elixir Extursions LLC 4.1 TCR
STATE-SIZE Vanduser Gin Co Inc 24 FTE
STATE-SIZE Service and Supply Cooperative, Bellflower MO 24 FTE
STATE-SIZE AMEREN MISSOURI - Osage Plant 24 FTE
STATE-SIZE Dogwood Energy Facility 24 FTE
NAT-TCR South Ice Cream Freezer 4.1 TCR
NAT-TCR The Fresh Market 192 4.1 TCR
NAT-TCR Pupil Personnel Services 4.1 TCR
NAT-TCR Holmes Redimix, Inc. 4.1 TCR
NAT-SIZE American Artstone Company 24 FTE
NAT-SIZE Farm Winery 24 FTE
NAT-SIZE S&H Sheet Metal & Fabricating Co., Inc. 24 FTE
NAT-SIZE Clear Solutions Inc 24 FTE

Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details.