Electroplating metals and formed products for the trade · Tennessee

Dewayne's Quality Metal Coatings

Lexington, TN · ~109 workers · 9 years of OSHA Injury Tracking Application data.

F
Failing Safety Record
8.2
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

Dewayne's Quality Metal Coatings runs at 248% of its industry's injury rate - far more dangerous than the typical Electroplating metals and formed products for the trade workplace, earning a grade F.

F
Failing Safety Record
8.2
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
79
recordable injuries tracked

Grade compares Dewayne's Quality Metal Coatings's OSHA Total Case Rate of 8.2 to the Electroplating metals and formed products for the trade BLS benchmark of 3.3 (248% of benchmark) across 9 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

Dewayne's Quality Metal Coatings's yearly Total Case Rate, against the 3.3 industry benchmark.

05101520 201620172018201920202021202220232024 10.43.3 Industry benchmarkDewayne's Quality Metal Coatings TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 332813.

Where Dewayne's Quality Metal Coatings falls in its industry

643 Electroplating metals and form establishments

Safer than 13% of graded establishments in this industry, whose median TCR is 3.7.

More dangerous than peersSafer than peers

Narrower to Tennessee alone (the establishments it most directly competes with for workers and contracts): ranked #7 safest of 11 Electroplating metals and form employers in Tennessee.

Trend analysis for Dewayne's Quality Metal Coatings

Between 2016 and 2024, Dewayne's Quality Metal Coatings's Total Case Rate worsened from 4.2 to 10.4 recordable injuries per 100 full-time workers, a 145% increase across 8 years of OSHA reporting.

The safest year on record was 2021, at a TCR of 0.9, while 2018 saw the highest rate, at 16.3, a spread of 15.4 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 9 reporting years, Dewayne's Quality Metal Coatings recorded 79 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 9-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 79 injuries, 3 illnesses shown on this page for Dewayne's Quality Metal Coatings are sourced from its own 9 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 332813 - Electroplating metals and formed products for the trade.

DART Rate, Transparent Calculation (2024)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

2 DART incidents × 200,000 ÷ 231,248 hours worked = 1.73 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
Dewayne's Quality Metal Coatings (this establishment) 8.18 OSHA ITA Form 300A, 9-year avg
Electroplating metals and formed products for the trade industry avg 3.30 BLS IIF, NAICS 332813
Tennessee state avg (all industries) 4.09 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by Dewayne's Quality Metal Coatings to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2024 10.4 1.7 12 0 0
2023 5.4 2.7 4 0 0
2022 5.4 2.2 4 1 0
2021 0.9 0.0 0 1 0
2020 13.8 8.9 13 1 0
2019 5.9 4.2 7 0 0
2018 16.3 8.2 20 0 0
2017 11.3 5.2 13 0 0
2016 4.2 1.4 6 0 0

What this grade means for you

Use this grade as a relative read on Dewayne's Quality Metal Coatings's reported OSHA injury record versus its Electroplating metals and formed products for the trade peers, not a verdict on whether any single site is safe today.

  • At 248% of the Electroplating metals and formed products for the trade benchmark, Dewayne's Quality Metal Coatings reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Electroplating metals and formed products for the trade sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is Dewayne's Quality Metal Coatings's safety grade?
Dewayne's Quality Metal Coatings has a safety grade of F (Failing Safety Record). This grade is based on their average Total Case Rate (TCR) of 8.2 compared to the BLS industry benchmark of 3.3 for Electroplating metals and formed products for the trade.
How many injuries has Dewayne's Quality Metal Coatings reported?
Dewayne's Quality Metal Coatings has reported 79 total injuries and 0 fatalities across 9 years of OSHA data (2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within Tennessee, and by nearby establishments in Lexington - a different peer set than the category browse links below.

Similar TCR (~8.2)

Similar size (~109 workers)

Nearby in Lexington

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2024, 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.