Machine shops · North Carolina
Dynamic Machining x Manufacturing, LLC
King, NC · ~29 workers · 8 years of OSHA Injury Tracking Application data.
- B
- Good Safety Record
- 2.3
- Avg TCR
- 3.3
- Industry avg
- 0
- Fatalities
The verdict
Dynamic Machining x Manufacturing, LLC runs at 68% of its industry's injury rate - safer than the typical Machine shops workplace, earning a grade B.
Dynamic Machining x Manufacturing, LLC: 2.3 TCR = 68% of Machine shops BLS 3.3 · 8y Form 300A (see methodology below)
Dynamic Machining x Manufacturing, LLC safety composite
Dynamic Machining x Manufacturing, LLC scores strongest on total case rate (tcr) (safer than 69% of same-industry peers) and weakest on dart rate (safer than 23%), blended into one 0-100 breakdown against same-industry peers. A missing measure drops out and redistributes its weight rather than deflating the score. This is a per-dimension breakdown, distinct from the single letter grade above it (which weights TCR alone against the BLS industry benchmark).
48/100
Percentile-weighted across 3 of 3 measures
- Total Case Rate (TCR)
- C 2.25 per 100 workers
Safer than 69% of industry peers
- DART rate
- F 3.01 per 100 workers
Safer than 23% of industry peers
- Fatalities
- D 0
Safer than 50% of industry peers
Benchmarked live against every credibly-rated employer in the same NAICS industry code in the current OSHA extract (a segment must have at least 8 rated peers to benchmark). Not a legal or compliance determination; PlainSafetyScore's own weighting (TCR 40%, DART 35%, fatalities 25%).
TCR Δ
−1.0
2017→2024
Dynamic Machining x Manufacturing, LLC injury rate improved
Dynamic Machining x Manufacturing, LLC's TCR fell 1.0 from 4.0 in 2017 to 3.0 in 2024. Peak filing year was 2017 at 4.0 TCR. In 2024, DART was 1.34× this establishment's average TCR (severity share of cases).
2017=4.0 · 2018=3.5 · 2019=3.9 · 2020=0.0 · 2021=0.0 · 2022=0.0 · 2023=3.7 · 2024=3.0
OSHA ITA Form 300A scorecard
Establishment book 332710 · King, NC AT/BELOW-IND · SMALL
Grade B · TCR 2.3 · 68% of ind
- DART 3.0 DART
- RANK #12/24
- PHOTO IMR - Hayden
- BOOK 8y book
- INJ 5 inj
- SIZE ~29 FTE
Nearest TCR peer: IMR - Hayden (0.0 TCR gap)
Read with this employer → · Industry book → · North Carolina employers → · Look up another →
Dynamic Machining x Manufacturing, LLC in the TCR neighbourhood
Average Total Case Rate among this establishment and nearest same-industry peers
- This site
Dynamic Machining x Manufacturing, LLC
2.3 TCR
- IMR - Hayden
IMR - Hayden
2.3 TCR
- Shop 1
Shop 1
2.3 TCR
- Pankl Aerospac
Pankl Aerospace
2.3 TCR
- At Machine - M
At Machine - M37
2.3 TCR
What this shows Dynamic Machining x Manufacturing, LLC averages 2.3 TCR (68% of the Machine shops BLS benchmark).
Dynamic Machining x Manufacturing, LLC TCR series: 2017=4 · 2018=3.5 · 2019=3.9 · 2020=0 · 2021=0 · 2022=0 · 2023=3.7 · 2024=3 · BLS 3.3
Where Dynamic Machining x Manufacturing, LLC falls in its industry
1,821 Machine shops establishmentsSafer than 69% of graded establishments in this industry, whose median TCR is 3.5.
Narrower to North Carolina alone (the establishments it most directly competes with for workers and contracts): ranked #12 safest of 24 Machine shops employers in North Carolina.
Dynamic Machining x Manufacturing, LLC has fewer employees than the Machine shops median and a lower injury rate than the industry's median TCR of 3.5. Workforce size and injury rate do not always move together within the same industry -- some of its smaller peers run higher rates than its larger ones, and vice versa.
Year-by-Year Safety Data
| Year | TCR | DART | Injuries | Illnesses | Fatalities |
|---|---|---|---|---|---|
| 2024 | 3.0 | 3.0 | 1 | 0 | 0 |
| 2023 | 3.7 | 0.0 | 1 | 0 | 0 |
| 2022 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2021 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2020 | 0.0 | 0.0 | 0 | 0 | 0 |
| 2019 | 3.9 | 3.9 | 1 | 0 | 0 |
| 2018 | 3.5 | 3.5 | 1 | 0 | 0 |
| 2017 | 4.0 | 0.0 | 1 | 0 | 0 |
OSHA ITA peer cross-reference
Establishment peer ledger
332710 · NC · King
1,821 Machine shops employers nationwide with a credible TCR · 16,981 rated employers in North Carolina with headcount on file · 17 employers in King, NC · 4 cross-state NAT-TCR peers · 4 cross-state NAT-SIZE peers. Closest matches by relationship code are listed below.
| Rel | Establishment | Metric |
|---|---|---|
| NAICS-TCR | IMR - Hayden | 2.3 TCR |
| NAICS-TCR | Shop 1 | 2.3 TCR |
| NAICS-TCR | Pankl Aerospace | 2.3 TCR |
| NAICS-TCR | At Machine - M37 | 2.3 TCR |
| STATE-SIZE | Black Gold Farms - NCC | 29 FTE |
| STATE-SIZE | Buy Sod - Sandhill | 29 FTE |
| STATE-SIZE | Cowans Ford | 29 FTE |
| STATE-SIZE | Craven County Wood Energy | 29 FTE |
| CITY-NEAR | WM 6789 | 315 FTE |
| CITY-NEAR | 6789 | 281 FTE |
| CITY-NEAR | Village Care of King | 136 FTE |
| CITY-NEAR | UHC King | 89 FTE |
| NAT-TCR | Mi-Jack Products | 2.3 TCR |
| NAT-TCR | Advanced Filtration Systems Inc | 2.3 TCR |
| NAT-TCR | Mid-Ohio Products, Inc. | 2.3 TCR |
| NAT-TCR | All County Electric Supply | 2.3 TCR |
| NAT-SIZE | 02 - KIUC - Eleele T&D | 29 FTE |
| NAT-SIZE | ARSI | 29 FTE |
| NAT-SIZE | Middleton | 29 FTE |
| NAT-SIZE | GCS Corpus Christi | 29 FTE |
Rel codes: NAICS-TCR · STATE-SIZE · CITY-NEAR · NAT-TCR/NAT-SIZE cross-state. Read with this employer →
Read our methodology - how this data is sourced, computed, and verified.