Copper products made by rolling, drawing, or extruding purchased copper · New Hampshire

ELEKTRISOLA Incorporated

Boscawen, NH · ~206 workers · 7 years of OSHA Injury Tracking Application data.

C
Average Safety Record
3.8
Avg TCR
3.3
Industry avg
0
Fatalities

The verdict

ELEKTRISOLA Incorporated runs at 116% of its industry's injury rate - about level with the typical Copper products made by rolling, drawing, or extruding purchased copper workplace, earning a grade C.

C
Average Safety Record
3.8
avg TCR · per 100 workers
3.3
industry benchmark (BLS)
54
recordable injuries tracked

Grade compares ELEKTRISOLA Incorporated's OSHA Total Case Rate of 3.8 to the Copper products made by rolling, drawing, or extruding purchased copper BLS benchmark of 3.3 (116% of benchmark) across 7 years of Form 300A filings (2016–2024). <a href="/methodology">See methodology</a> for reporting-limitation caveats.

Injury rate over time

ELEKTRISOLA Incorporated's yearly Total Case Rate, against the 3.3 industry benchmark.

-202468 2016201820192020202120222023 73.3 Industry benchmarkELEKTRISOLA Incorporated TCR
Total Case Rate (recordable injuries per 100 full-time workers), OSHA ITA Form 300A. Industry benchmark: BLS IIF, NAICS 331420.

Where ELEKTRISOLA Incorporated falls in its industry

206 Copper products made by rollin establishments

Safer than 46% of graded establishments in this industry, whose median TCR is 3.7.

More dangerous than peersSafer than peers

Trend analysis for ELEKTRISOLA Incorporated

Between 2016 and 2023, ELEKTRISOLA Incorporated's Total Case Rate held roughly steady from 0.0 to 7.0 recordable injuries per 100 full-time workers, a 0% change across 7 years of OSHA reporting.

The safest year on record was 2016, at a TCR of 0.0, while 2022 saw the highest rate, at 7.3, a spread of 7.3 points between the best and worst reporting years. That's a wide swing relative to the establishment's overall rate, worth checking the year-by-year table below for whether a single severe year is driving the average, rather than a sustained trend.

Summed across those 7 reporting years, ELEKTRISOLA Incorporated recorded 54 total injuries and illnesses, with no fatalities reported in any of those years. Readers comparing establishments should weigh the 7-year trend above alongside establishment size, since a larger workforce naturally accumulates more raw incidents even at a lower per-100-worker rate.

Verify This Employer with OSHA

The 54 injuries, 4 illnesses shown on this page for ELEKTRISOLA Incorporated are sourced from its own 7 years of mandatory OSHA Form 300A summaries. Cross-check the underlying establishment record directly against the federal source, name, NAICS classification, recordable case totals, and inspection history are all searchable on OSHA's Establishment-Specific Injury and Illness Data system.

Verify on OSHA Establishment Search

Source: U.S. Department of Labor, OSHA Establishment-Specific Injury and Illness Data. NAICS 331420 - Copper products made by rolling, drawing, or extruding purchased copper.

DART Rate, Transparent Calculation (2023)

What is the DART rate formula?

DART (Days Away, Restricted, or Transferred) is computed by OSHA as incidents × 200,000 ÷ hours worked. The 200,000-hour denominator equals roughly 100 full-time workers, which lets establishments of very different sizes be compared directly.

7 DART incidents × 200,000 ÷ 488,800 hours worked = 2.86 DART

Methodology: 29 CFR 1904, OSHA Form 300A recordkeeping

Cross-Validating Context, Establishment vs Industry vs State

Benchmark TCR Source
ELEKTRISOLA Incorporated (this establishment) 3.82 OSHA ITA Form 300A, 7-year avg
Aircraft and automotive wire or cable made from purchased copper in wire drawing plants industry avg 3.30 BLS IIF, NAICS 331420
New Hampshire state avg (all industries) 5.93 OSHA ITA, state-level rollup

Industry benchmarks: Bureau of Labor Statistics, Injuries, Illnesses, and Fatalities (IIF) program

Reportable Incident Timeline

Year-by-year reportable incidents (recordable injuries + illnesses + fatalities) submitted by ELEKTRISOLA Incorporated to OSHA's Injury Tracking Application. Each row anchors to OSHA's inspection records search where you can pull the underlying inspection case numbers and citations for that establishment-year.

Source: OSHA Inspection Information System (IMIS) - inspection case-number records

Year-by-Year Safety Data

Year TCR DART Injuries Illnesses Fatalities
2023 7.0 2.9 16 1 0
2022 7.3 2.1 17 0 0
2021 2.5 1.0 5 0 0
2020 4.0 1.5 8 0 0
2019 2.0 0.5 3 1 0
2018 4.0 2.9 5 2 0
2016 0.0 0.0 0 0 0

What this grade means for you

Use this grade as a relative read on ELEKTRISOLA Incorporated's reported OSHA injury record versus its Copper products made by rolling, drawing, or extruding purchased copper peers, not a verdict on whether any single site is safe today.

  • At 116% of the Copper products made by rolling, drawing, or extruding purchased copper benchmark, ELEKTRISOLA Incorporated reports more injuries than typical peers, ask specifically how the employer is reducing them. Know your rights
  • Judge this record against the wider Copper products made by rolling, drawing, or extruding purchased copper sector, where injury rates vary widely, before comparing it in isolation. See the industry
  • Grades reflect 2016–2024 filings; check the latest establishment record straight from OSHA, or look up a different employer. Look up another

Safety grades reflect employers' self-reported OSHA Form 300A filings from 2016 to 2024 and can lag current conditions. A grade is not a guarantee that any specific workplace is safe or unsafe today. See our methodology and disclaimer.

Frequently Asked Questions

What is ELEKTRISOLA Incorporated's safety grade?
ELEKTRISOLA Incorporated has a safety grade of C (Average Safety Record). This grade is based on their average Total Case Rate (TCR) of 3.8 compared to the BLS industry benchmark of 3.3 for Copper products made by rolling, drawing, or extruding purchased copper.
How many injuries has ELEKTRISOLA Incorporated reported?
ELEKTRISOLA Incorporated has reported 54 total injuries and 0 fatalities across 7 years of OSHA data (2023, 2022, 2021, 2020, 2019, 2018, 2016). This data comes from mandatory OSHA Injury Tracking Application (ITA) reports.

Similar Employers

Matched by safety record across the industry, by workforce size within New Hampshire, and by nearby establishments in Boscawen - a different peer set than the category browse links below.

Similar TCR (~3.8)

Similar size (~206 workers)

Nearby in Boscawen

Data Source: OSHA Injury Tracking Application (ITA), mandatory establishment-level injury/illness reports. Grades compare employer Total Case Rate (TCR) to BLS IIF industry benchmarks. Data covers years reported by this establishment: 2023, 2022, 2021, 2020, 2019, 2018, 2016. This is publicly available government data - not a legal determination of workplace conditions.

Read our methodology - how this data is sourced, computed, and verified.

Data sourced from official public datasets. See our methodology for details. Retrieved and formatted by PlainSafetyScore Editorial

Every figure and grade on PlainSafetyScore is computed directly from OSHA's published Injury Tracking Application data and BLS industry benchmarks, no number is typed in by an editor. See our editorial standards & corrections policy, the methodology behind these safety grades, or report a data error. Data current as of 2016-2024 OSHA ITA release.